Advantech ASMB-920IR User manual

User Manual
ASMB-920IR

ASMB-920IR User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2012
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2002920I00 Edition 1
Printed in Taiwan April 2012

iii ASMB-920IR User Manual
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting specifications
to ensure reliable performance in the harsh and demanding conditions typical of
industrial environments. Whether your new Advantech equipment is destined for the
laboratory or the factory floor, you can be assured that your product will pro-
vide the reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our primary concern. Here is a guide to Advantech’s customerser-
vices. To ensure you get the full benefit of our services, please follow the instructions
below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into-
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most prob-
lems reported are minor and are easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

ASMB-920IR User Manual iv
Declaration of Conformity
FCC
This device complies with the requirements in part 15 of the FCC rules:
Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that-
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment
isoperated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this device in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his/her own
expense. The user is advised that any equipment changes or modifications not
expressly approved by the party responsible for compliance would void the compli-
ance to FCC regulations and therefore, the user's authority to operate the equipment.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.

v ASMB-920IR User Manual
Peripheral Compatibility
Category Advantech PN Vendor Part Description Remarks
MB ASMB-920IR-00A1E Advantech Support BMC module & SAS HDD
ASMB-920-00A1E Advantech Basic sku
CPU 96MPXE-2.1-20M20T Intel Xeon E5-2658/2.1GHz/8cores 95W 96MPXE-2.0-15M20T Intel Xeon E5-2620/2.0GHz/6cores 95W
96MPXE-1.8-20M20T Intel Xeon E5-2648L/1.8GHz/8cores 70W
SATA3
HDD
96HD500G-ST-SG7K12 SEAGATE 500G 3.5" SATA 7KRPM 16M ST500DM002
96HD1000G-ST-SG7K6 SEAGATE 1T 3.5" SATA 7KRPM 64M ST1000DM003
96HD2000G-ST-SG7K2 SEAGATE 2T 3.5" SATA 7KRPM 64M ST2000DM001
SAS2
HDD 96HD300G-SS-SG15K1 SEAGATE 300G 3.5" SAS 15KRPM 6G 16M(G) ST3300657SS
Memory/
REG
96D3-1G1333ER-AP Apacer 1G DDR3-1333 240PIN REG 128X8 ELP(G) 78.01GCC.AF0
96D3-2G1333ER-AP Apacer 2G DDR3-1333 240PIN REG 128X8 ELP(G) 78.A1GDR.4200C
96D3-4G1333ER-AP1 Apacer 4G DDR3-1333 240PIN REG 256X8 HYX(G) 78.B1GDR.4201C
TBD Transcend 1G DDR3-1333 240PIN ECC REG TS128MKR72V3U
TBD Transcend 2G DDR3-1333 240PIN ECC REG TS256MKR72V3U
TBD Transcend 4G DDR3-1333 240PIN ECC REG TS512MKR72V3N
TBD ADATA 4G DDR3-1333 240PIN ECC REG EL93I1C18
TBD ADATA 8G DDR3-1333 240PIN ECC REG EL93I1D18
TBD InnoDisk 4G DDR3-1333 240PIN ECC REG ACT4GHR72P8H
1333H
TBD InnoDisk 8G DDR3-1333 240PIN ECC REG ACT8GHR72Q4H
1333S
TBD InnoDisk 16G DDR3-1066 240PIN ECC REG ACT16GHR72Q4J
1333S
Memory/
ECC
TBD Transcend 1G DDR3-1333 240PIN ECC TS128MLK72V3U
TBD Transcend 2G DDR3-1333 240PIN ECC TS256MLK72V3U
TBD Transcend 4G DDR3-1333 240PIN ECC TS512MLK72V3N
TBD InnoDisk 4G DDR3-1333 240PIN ECC M3CN-4GHJ3C09
TBD ADATA 4G DDR3-1333 240PIN ECC EL03I1C18
Memory/
UNB TBD ADATA 4G DDR3-1600 240PIN EL64C1C16
96D3-4G1333NN-TR Transcend 4G DDR3-1333 240PIN TS512MLK64V3N
Cooler 1960055362N001 AVC Cooler I-LGA2011 S-95W 90x90x65.65-SS 12V0.42A-5 Z6UR41J001
Option
Card PCA-AUDIO-HDA1E Advantech Audio card
Daugh-
ter Board
(PME)
ASMB-FF208-02A1E Advantech ASMB-FF208(Only support PCI-E Gen1 signal) 2x PCI-Ex16(x8
link)
ASMB-FF3PX-12A1E Advantech ASMB-FF3PX 2x PCI-X + 1x PCI
ASMB-FF20F-02A1E Advantech ASMB-FF20F(Only support PCI-E Gen2 signal) 2x PCI-Ex16(x16
link)

ASMB-920IR User Manual vi
Initial Inspection
Before installing motherboard, please make sure that the following
materials have been shipped:
1 x ASMB-920IR EATX motherboard
1 x ASMB-920IR Startup Manual
1 x Driver CD (user manual is included)
2 x Serial ATA HDD data cables
1 x I/O port bracket
2 x SATA power cable
1 x Warranty card
If any of these items are missing or damaged, contact distributor or sales representa-
tive immediately. We have carefully inspected the ASMB-920IR mechanically and
electrically before shipment. It should be free of marks and scratches and in perfect
working order upon receipt. When unpacking the ASMB-920IR, check it for signs of
shipping damage. (For example, damaged box, scratches, dents, etc.) If it is dam-
aged or it fails to meet the specifications, notify our service department or local sales
representative immediately. Also notify the carrier. Retain the shipping carton and
packing material for inspection by the carrier. After inspection, we will make arrange-
ments to repair or replace the unit.
Order Information
Part Number HDD Expansion Slot IPMI
ASMB-920IR-00A1E 6 SATA + 8 SAS/SATA 2 x PCIe x16 Yes
ASMB-920-00A1E 6 SATA 2 x PCIe x16 -

vii ASMB-920IR User Manual
Contents
Chapter 1 Overview...............................................1
1.1 Introduction ...............................................................................................2
1.2 Features....................................................................................................2
1.3 Specifications............................................................................................3
Table 1.1: Specifications .............................................................3
1.4 Board Layout, Jumpers and Connectors...................................................5
Figure 1.1 Board Layout..............................................................5
Figure 1.2 Rear I/O......................................................................6
Table 1.2: Onboard LAN LED Color Definition............................6
Table 1.3: Jumpers......................................................................6
Table 1.4: Connectors.................................................................6
Table 1.5: Onboard LED..............................................................8
1.5 Block Diagram...........................................................................................8
Figure 1.3 Block Diagram............................................................8
1.6 System Memory........................................................................................8
1.7 Memory Installation Procedures................................................................9
1.8 Processor Installation................................................................................9
Chapter 2 Connections.......................................11
2.1 Introduction .............................................................................................12
2.2 USB Ports and LAN Ports (USB0~USB10/LAN1/LAN2/IPMI_LAN1) .....12
2.3 VGA Connector.......................................................................................13
2.4 Serial Ports (COM1/COM2) ....................................................................14
2.5 PS2 Keyboard and Mouse Connectors (KBMS1) ...................................15
2.6 CPU Fan Connector (CPU FAN0/FAN1) ................................................16
Table 2.1: CPU FAN0 Pin Definition..........................................16
2.7 System Fan Connector (SYS FAN0/FAN1/FAN2) ..................................17
Table 2.2: SYS FAN0 Pin Definition..........................................17
2.8 Front Panel Connector (JFP1) ................................................................18
2.8.1 Power LED (JFP1)......................................................................18
Table 2.3: ATX Power Supply LED Status................................18
2.8.2 External Speaker (JFP1 pins 10, 12, 14, 16)..............................18
2.8.3 HDD LED Connector (JFP1 Pins 5 & 7) .....................................19
2.8.4 Reset Connector (JFP1 Pins 2 & 4)............................................19
2.8.5 Case Open (JFP1 Pins 6 & 8).....................................................19
2.9 SATA SGPIO (SATA_SGPIO1) ..............................................................20
2.10 SAS SGPIO (SGPIO_1/SGPIO_2) ........................................................21
2.11 Front Panel LAN Indicator Connector (LANLED1)..................................22
2.12 Serial ATA Interface (SATA0 ~ 5)...........................................................23
2.13 PCIe x16 Expansion Slots (PCIEX16_SLOT6/PCIEX16_SLOT7)..........24
2.14 Serial Attached SCSI Interface (SAS0 ~ 7).............................................25
2.15 Auxiliary Power Connector (ATX_8P_PQ/ATX_8P_P1/ATX_P24).........26
2.16 HD Audio Interface Connector (AUDIO1) ...............................................27
2.17 LPC Connector (LPC1) for Optional TPM Module..................................28
2.18 Clear CMOS Connector (JCMOS1) ........................................................29
2.19 PMBUS Connector (PMBUS1)................................................................30
2.20 Front Panel SMBUS Connector (SMBUS1)............................................31
2.21 IPMI Module Connector (IPMI1)* ............................................................32
2.22 PME Module Slot*...................................................................................33
2.23 VOLT1 Connector...................................................................................34

ASMB-920IR User Manual viii
Chapter 3 AMI BIOS............................................35
3.1 Introduction ............................................................................................. 36
3.2 BIOS Setup............................................................................................. 37
3.2.1 Main Menu.................................................................................. 37
3.2.2 Advanced BIOS Features Setup................................................. 37
3.2.3 Chipset........................................................................................ 54
3.2.4 Server Management................................................................... 61
3.2.5 Boot ............................................................................................ 62
3.2.6 Security....................................................................................... 63
3.2.7 Save & Exit................................................................................. 64
Chapter 4 Chipset Software Installation Utility 65
4.1 Before Beginning .................................................................................... 66
4.2 Introduction ............................................................................................. 66
4.2.1 Main Menu.................................................................................. 66
4.3 Windows XP / Windows 2003 / Windows 2008 / Windows 7 Driver Setup.
67
Chapter 5 VGA Setup .........................................69
5.1 Introduction ............................................................................................. 70
5.2 Windows Series Driver Setup................................................................. 70
Chapter 6 Lan Configuration.............................71
6.1 Introduction ............................................................................................. 72
6.2 Features.................................................................................................. 72
6.3 Installation............................................................................................... 72
6.4 Windows Series Driver Setup (LAN)....................................................... 72
Appendix A Programming the Watchdog Timer.75
A.1 Watchdog Timer Overview...................................................................... 76
A.2 Programming the Watchdog Timer......................................................... 76
Table A.1: Watchdog Timer Registers....................................... 78
A.2.1 Example Programs..................................................................... 78
Appendix B I/O Pin Assignments.........................83
B.1 USB Header (USB45, USB67, USB89).................................................. 84
Table B.1: USB Header (USB45,USB67,USB89,USB1011)..... 84
B.2 VGA Connector (VGA1).......................................................................... 84
Table B.2: VGA Connector (VGA1) ........................................... 84
B.3 RS-232 Interface (COM2)....................................................................... 85
Table B.3: RS-232 Interface (COM2) ........................................ 85
B.4 PS/2 Keyboard and Mouse Connector (KBMS1).................................... 85
Table B.4: Keyboard and Mouse Connector (KBMS1).............. 85
B.5 External Keyboard Connector (KBMS2)................................................. 86
Table B.5: External Keyboard Connector (KBMS2)................... 86
B.6 System Fan Power Connector (SYSFAN0~2)........................................ 86
Table B.6: Fan Power Connector (SYSFAN0/SYSFAN1/
SYSFAN2)................................................................ 86
B.7 Power LED (JFP1).................................................................................. 86

ix ASMB-920IR User Manual
Table B.7: Power LED (JFP1)....................................................86
B.8 External Speaker Connector (JFP1) .......................................................87
Table B.8: External Speaker Connector (JFP1).........................87
B.9 Reset Connector (JFP1) .........................................................................87
Table B.9: Reset Connector (JFP1)...........................................87
B.10 HDD LED Connector (JFP1)...................................................................87
Table B.10:HDD LED Connector (JFP1) ....................................87
B.11 ATX Soft Power Switch (JFP1)...............................................................88
Table B.11:ATX Soft Power Switch (JFP1).................................88
B.12 Front panel SMBus Connector (SMBUS1)..............................................88
B.13 USB/LAN Ports (LAN1_USB01 and LAN2_USB23) ...............................88
Table B.12:USB Port...................................................................88
Table B.13:Giga LAN 10/100/1000 Base-T RJ-45 Port..............89
B.14 Audio Connector (AUDIO1).....................................................................89
Table B.14:Front Panel Audio Connector (FPAUD1)..................89
B.15 8-pin Alarm Board Connector (VOLT1)...................................................89
Table B.15:8-pin Alarm Board Connector (VOLT1)....................89
B.16 Case Open Connector (JFP1).................................................................90
Table B.16:Case Open Connector (JFP1)..................................90
B.17 Front Panel LAN LED Connector (LANLED1).........................................90
Table B.17:LAN LED Connector (LANLED1)..............................90

ASMB-920IR User Manual x

Chapter 1
1Overview

ASMB-920IR User Manual 2
1.1 Introduction
The ASMB-920IR serverboard is the most advanced Intel Xeon E5-2600 series
board for server-grade IPC applications that require high-performance computing.
The serverboard supports an Intel Xeon E5-2600 series processor and DDR3 1066/
1333/1600 MHz memory up to 128GB.
ASMB-920IR provides dual PCIe x16 slots which can support two high performance
graphic cards.
For multi-interface expansion card applications, ASMB-920IR can support three addi-
tional expansion slots with a PME board.
In addition, the ASMB-920IR has dual Gigabit Ethernet LAN ports via a dedicated
PCIe x1 bus, which offer bandwidth up to 500 MB/s, eliminating network bottlenecks.
The ASMB-920IR has a third RJ-45 LAN connector which is dedicated for IPMI func-
tion allowing remote control
High reliability and outstanding performance makes ASMB-920IR the ideal platform
for industrial server/networking applications.
By using the Intel C600 chipset, the ASMB-920IR offers a variety of features such as
4 onboard SATA II, and 2 onboard SATA III interfaces; it provides software RAID 0, 1,
10 and 5 (Windows only); and it has 11 USB 2.0 connectors.
ASMB-920IR has an embedded LSI SAS controller SAS2008, which can support 8
SAS/SATA HDDs and RAID 0,1,1E.
These powerful I/O capabilities ensure even more reliable data storage capabilities
and high-speed I/O peripheral connectivity.
1.2 Features
General
Intel next generation dual processor platform: ASMB-920IR supports two
Intel E5-2600 series Quad/Six/Eight core processors.
High performance I/O capability: Dual Gigabit LAN via PCIe x1 bus, two PCIe
X16 slots, 6 SATA connectors, 11 USB 2.0 ports, and 8 SAS/SATA connectors.
Standard EATX form factor with industrial features: ASMB-920IR provides
industrial features like long product lifecycle, reliable operation under wide tem-
perature range, watchdog timer, etc.
SAS hard drive support: Embedded LSI SAS2008 controller which can sup-
port eight SAS/SATA HDD with RAID 0,1,1E.
IPMI 2.0 support: ASMB-920IR equipped with Aspeed 2300 BMC chip sup-
ports IPMI 2.0 (Intelligent Platform Management Interface 2.0) via dedicated
LAN port.
KVM over IP: ASMB-920IR KVM over IP function allows remote control of sys-
tem through your own computer.
Note! 1. IPMI module sold separately.
2. 4 rear USB connectors; 3 USB pin headers onboard (2 ports from
one header); 1 type-A USB connector onboard.

3 ASMB-920IR User Manual
Chapter 1 Overview
1.3 Specifications
Table 1.1: Specifications
Processor
CPU Dual Intel LGA2011 XEON processor sockets
Supports Intel XEON E5-2600 series processor with Quad/
Six/Eight cores
Supports TDP 70W/95W Intel XEON E5-2600 series
processor
Processor Bus QPI bus speed 8 GT/s
System Memory
Memory Capacity Xeon processor supports DDR3 memory bus
Total 8 memory slots provided
4 channels per processor, 1 memory slot per channel
Supports up to 128 GB memory
Memory Type Supports DDR3 1066/1333/1600 MHz ECC Registered / ECC
Unbuffered / Non-ECC Unbuffered Modules.
DIMM Sizes Each memory slot supports 1GB, 2GB, 4GB, 8GB, 16GB memory
size modules.
Memory Voltage 1.35V & 1.5 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipsets Intel C602J PCH provide 8xPCIe Gen2 lanes for SAS, VGA, Net-
work.
Network Controllers 1 x Intel 82574L Gigabit Ethernet Controller connected to
C600 through PCIe Gen2 Lane.
1x Intel 82579LM Gigabit PHY connected to C600 MAC.
Above network Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ-45 output.
1 x 10/100BASE RealTek 8201EL-VB PHY connected to
AST2300 for dedicated IPMI/IKVM.
VGA ASPEED AST2300 controller with 64 MB VGA memory provides
basic 2D VGA function.
Super I/O Nuvoton NCT6776F chip provide motherboard keyboard mouse,
RS-232, and hardware monitor functions.
SAS (IR SKU Only) LSI SAS2008 provides 8 x SAS 6 Gb/s ports and support
RAID 0, 1, 1E.
LSI SAS2008 connected to C600 occupies 4 x PCIe-Gen2
lanes.
8 x SAS ports are controlled by LSI SAS2008 chip with stan-
dard 7-pin connector.
BMC (IR SKU Only) ASPEED AST2300 provides IPMI & IKVM function.
Input / Output
Serial ATA Total 6 x SATA ports, 2 ports provide 6 Gb/s bandwidth, 4
ports provide 3 Gb/s bandwidth.
RAID 0, 1, 5, 10 support (Windows only).
LAN 2 x RJ-45 LAN ports (10/100/1000 Base-T LAN).
1 x RJ-45 Dedicated IPMI LAN port(10/100 Base-T) for IPMI
only, there is no regular LAN function (IR SKU Only).

ASMB-920IR User Manual 4
USB 4 x USB ports at rear window.
3 x USB internal headers (6 ports).
1 x internal Type-A USB port.
VGA 1 x VGA port
Keyboard / Mouse PS/2 keyboard and mouse connector at rear window.
Serial Port / Header 1 x internal header (2 x 5 2.5 mm pitch) for UART port
1 x external DB9 UART
Power Connector
System Power 1 x 24-pin SSI EPS 12 V power connector (Input 12 V, 5 V, 3.3 V, 5
V standby)
CPU Power 2 x 8 pin SSI EPS 12 V power connector for CPU & Memory power
(12V)
Expansion Slots
PCI-Express 2 x PCI-E x16 slot (Gen2 x16 Link) (Slot 6 and 7)
1 x PME slot*
System BIOS
BIOS Type 64 Mb SPI Flash EEPROM with AMI BIOS
PC Health Monitoring
Voltage Monitors for CPU Cores, +3.3 V, +5 V, +12 V, +5 V Standby, VBAT
FAN Two 4-pin heads for CPU cooler and three 4-pin headers for
system fan.
All fans with tachometer status monitoring
Thermal control for all fan connectors
Temperature Monitoring for CPU *2 (PECI)
Monitoring for System (SIO)
Other Features
( Case Open ) Chassis intrusion detection
Chassis Intrusion header
Operating Environment / Compliance
RoHS RoHS Compliant 6/6 Pb Free
Environmental Spec. Operating Temperature: 0 to 40°C
Non-operating Temperature: -10 to 70°C
Operating Relative Humidity: 0% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condens-
ing)
Note! If you need more expansion slots, apply a PME to ASMB-920IR.
PMEs have different types and design flexibility for different interface
expansion cards. Please visit Advantech official website to see what
kind of PME can be used.
Table 1.1: Specifications

5 ASMB-920IR User Manual
Chapter 1 Overview
1.4 Board Layout, Jumpers and Connectors
Connectors on the ASMB-920IR are linked to external devices such as hard disk
drives. In addition, ASMB-920IR has a number of jumpers that are used to configure
system for specific applications.
The tables below list the functions of each jumper and connector. Later sections in
this chapter give instructions for setting jumpers. Chapter 2 gives instructions for con-
necting external devices to ASMB-920IR.
Figure 1.1 Board Layout
PCIEx16_SLOT6
PCIEx16_SLOT7
DIMM
E1
DIMM F1
CPU Fan1
IPM I LAN1
LAN1_USB01
LAN2_USB23
COM1 + VGA1
KBMS1
KBMS2
ATX8P_P1
DIMM H1
DIMM G1
CPU1
PMBUS1
ATX 24P_P1
CPU0
DIMM A1
DIMM B1
ATX 8P_P0
CPU FAN0
DIMM C1
DIMM D1
SYS FAN0
SYS FAN1
SMBUS1
SAS_SGPIO_2
SYS FAN2
8 SAS II
2 SATA III
4 SATA II
USB4_5
USB6_7
USB8_9
USB10
LAN LED1
JFP1
SATA _SGPIO1
PCIE_PME1
JCMOS1
LPC1
IPM I1
COM2
AUDIO 1
SAS_
SGPIO1
GPIO1
JME1
VOLT1

ASMB-920IR User Manual 6
Figure 1.2 Rear I/O
Table 1.2: Onboard LAN LED Color Definition
10/100/1000 Mbps LAN Link/Activity LED Scheme
LAN1 & LAN2 IPMI LAN1
Left LED Right LED Left LED Right LED
10 Mbps Link Active Off Off Green Blinking green Amber - Blinking green
100 Mbps Link Active Amber Amber Green Blinking green Amber - Blinking green
1000 Mbps Link Active Green Green Green Blinking green --
No Link Off Off Off Off
Table 1.3: Jumpers
Label Function
JCMOS1 CMOS Clear
JME1 ME update
Table 1.4: Connectors
Label Function
ATX_8P_P0 SSI EPS 12 V auxiliary power connector (for CPU0) and memory
ATX_8P_P1 SSI EPS 12 V auxiliary power connector (for CPU1) and memory
ATX_24P_P1 SSI EPS 24-pin main power connector (for system)
COM2 Serial port: RS-232
CPU0 Intel LGA2011 CPU0 socket
CPU1 Intel LGA2011 CPU1 socket
CPUFAN0 CPU0 fan connector (4-pin)
PS2 Mouse COM1 LAN1 LAN2
PS2 Keyboard VGA USB01 USB23 IPMI
LAN1

7 ASMB-920IR User Manual
Chapter 1 Overview
CPUFAN1 CPU1 fan connector (4-pin)
DIMMA1 Channel A DIMM1 of CPU0
DIMMB1 Channel B DIMM1 of CPU0
DIMMC1 Channel C DIMM1 of CPU0
DIMMD1 Channel D DIMM1 of CPU0
DIMME1 Channel E DIMM1 of CPU1
DIMMF1 Channel F DIMM1 of CPU1
DIMMG1 Channel G DIMM1 of CPU1
DIMMH1 Channel H DIMM1 of CPU1
JFP1 Front panel pin header connector
AUDIO1 HD audio Interface connector
IPMI1 IPMI connector
LANLED1 LAN1/2 LED extension connector
LPC1 LPC port for debug & TPM module
PCIEX16_SLOT6 PCIe x16 slot
PCIEX16_SLOT7 PCIe x16 slot
SAS0 SAS0 hard drive connector(IR SKU only)
SAS1 SAS1 hard drive connector(IR SKU only)
SAS2 SAS2 hard drive connector(IR SKU only)
SAS3 SAS3 hard drive connector(IR SKU only)
SAS4 SAS4 hard drive connector(IR SKU only)
SAS5 SAS5 hard drive connector(IR SKU only)
SAS6 SAS6 hard drive connector(IR SKU only)
SAS7 SAS7 hard drive connector(IR SKU only)
SATA0 Serial ATA0 hard drive connector(SATA III)
SATA1 Serial ATA1 hard drive connector(SATA III)
SATA2 Serial ATA2 hard drive connector(SATA II)
SATA3 Serial ATA3 hard drive connector(SATA II)
SATA4 Serial ATA4 hard drive connector(SATA II)
SATA5 Serial ATA5 hard drive connector(SATA II)
SAS_SGPIO_1 SGPIO connector for SAS0 ~ SAS3(IR SKU only)
SAS_SGPIO_2 SGPIO connector for SAS4 ~ SAS7(IR SKU only)
SYS FAN0 System fan connector (4-pin)
SYS FAN1 System fan connector (4-pin)
SYS FAN2 System fan connector (4-pin)
USB45 USB port 4, 5
USB67 USB port 6, 7
USB89 USB port 8, 9
USB10 USB port 10 (Type-A)
Table 1.4: Connectors

ASMB-920IR User Manual 8
1.5 Block Diagram
Figure 1.3 Block Diagram
1.6 System Memory
ASMB-920IR has eight 240-pin memory slots for DDR3 1066/1333/1600 MHz mem-
ory modules with maximum capacity of 128 GB (Maximum 16 GB for each DIMM).
ASMB-920IR supports registered DIMMs or unbuffered DIMM with ECC / Non-ECC
memory module.
Table 1.5: Onboard LED
LED Description LED Definition
5V_LED1 Power on LED Off:
Power off On (Green): System is On
5VSB_LED1 Standby LED Off:
No input AC Power On (Green): System is ON, in sleep mode,
or in soft-off mode
LED1 SAS error LED
(IR SKU Only) On (Red): Failed to initial SAS controller
LED2 SAS heartbeat LED
(IR SKU Only) Blinking (Green) : Controller is working normally
LED3 BMC heartbeat LED
(IR SKU Only) Blinking (Green) : Controller is working normally

9 ASMB-920IR User Manual
Chapter 1 Overview
1.7 Memory Installation Procedures
To install DIMMs, make sure that two handles of the DIMM socket are in the "open"
position. The handles lean outward. Slowly slide the DIMM module along the plastic
guides on both ends of the socket, and then press the DIMM module right down into
the socket, until you hear a click. This is when the two handles have automatically
locked the memory module into the correct position of the DIMM socket. To remove
the memory module, just push both handles outward, and the memory module will be
ejected by the mechanism in the socket.
1.8 Processor Installation
The ASMB-920IR is designed for dual LGA2011, Intel E5-2600 series Xeon proces-
sor.
Single CPU
Installed (CPU0) Dual CPU Installed (CPU0 & CPU1)
Quantity of memory
installed 1234 12345678
DIMMA-1 VVVV VVVVVVVV
DIMMB-1 VVVV VVVVVVVV
DIMMC-1 VVVV VVVVVVVV
DIMMD-1 VVVV VVVVVVVV
DIMME-1 VVVVVVVV
DIMMF-1 VVVVVVVV
DIMMG-1 VVVVVVVV
DIMMH-1 VVVVVVVV

ASMB-920IR User Manual 10