Advantech PCM-9562 User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

User Manual
PCM-9562
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2010
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
Part No. 2006956212 Edition 3
Printed in China March 2011
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

iii PCM-9562 User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual iv
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advan-
tech.com
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
1 x PCM-9562 SBC
1 x Startup manual
1 x Utility CD
1 x ATX 5VSB CABLE 1700015741
1 x mini jumper pack 9689000002
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

v PCM-9562 User Manual
Ordering Information
Model Number Description
PCM-9562D-S6A1E D510+ICH8M 2GbE/5COM/3SATAII/CFII/M-PCIe
PCM-9562N-S6A1E N450+ICH8M 2GbE/5COM/3SATAII/CFII/M-PCIe
PCM-9562DF-S6A1E D510+ICH8M 3GbE/6COM/3SATAII/CFII/M-PCIe
PCM-9562NF-S6A1E N450+ICH8M 3GbE/6COM/3SATAII/CFII/M-PCIe
Optional Accessories
Model CPU Memory LVDS GbE GbE3
UL60601 WDT HD Audio USB2.0 RS-232 RS-422/485 PC-104+ Mini-PCIe Thermal Operating Temperature
PCM-9562N-S6A1E N450 SO_DIMM 18-bit 2 - 1 HD 8 3 2 Yes 1 Passive 0-60°C
PCM-9562D-S6A1E D510 SO_DIMM 18-bit 2 - 1 HD 8 3 2 Yes 1 Active 0-60°C
PCM-9562NF-S6A1E N450 SO_DIMM 18-bit 2 1 2 HD 8 3+1 2 Yes 1 Passive 0-60°C
PCM-9562DF-S6A1E D510 SO_DIMM 18-bit 2 1 2 HD 8 3+1 2 Yes 1 Active 0-60°C
PCM-9562NZ-1GS6A1E N450 Bundle 1GB 18-bit 2 Optional 1 HD 8 3 2 Yes 1 Passive -20-80°C
PCM-9562Z2-1GS6A1E N450 Bundle 1GB 18-bit 2 Optional 1 HD 8 3 2 Yes 1 Passive -40-85°C
Part Number Description
PCM-10586-9562E Wiring kit for PCM-9562 Series
PCM-110-00A3E 1-slot PCI riser card for 5.25" biscuits
PCM-120-00A3E 2-slot PCI riser card for 5.25" biscuits
PCM-200-00A2E PC/104-Plus to PCI bus module
CF-HDD-ADP CompactFlash 50-pin to IDE 44-pin adapter
1960049954N001 Hearspreader 157.4 x 100 x 24 mm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual vi
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
 The power cord or plug is damaged.
 Liquid has penetrated into the equipment.
 The equipment has been exposed to moisture.
 The equipment does not work well, or you cannot get it to work according to
the user's manual.
 The equipment has been dropped and damaged.
 The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

vii PCM-9562 User Manual
Wichtige Sicherheishinweise
1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.
2. Heben Sie diese Anleitung für den späteren Gebrauch auf.
3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie
Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch
zur Reinigung.
4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht
zugänglich sein.
5. Das Gerät ist vor Feuchtigkeit zu schützen.
6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen
oder Fallen könnte Verletzungen hervorrufen.
7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-
zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.
8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.
9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann. Es
sollte auch nichts auf der Leitung abgestellt werden.
10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten.
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom
Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung
vermieden.
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in
das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus-
lösen.
13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen
Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen
und von einer qualifizierten Servicestelle zu überprüfen:
15. Netzkabel oder Netzstecker sind beschädigt.
16. Flüssigkeit ist in das Gerät eingedrungen.
17. Das Gerät war Feuchtigkeit ausgesetzt.
18. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder
Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.
19. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
20. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
21. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batterie.Ersatz
nur durch densellben order einem vom Hersteller empfohlene-mahnlichen Typ.
Entsorgung gebrauchter Batterien navh Angaben des Herstellers.
22. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf nicht fach-
männische Weise gewechselt wird. Verfangen Sie die Batterie nur gleicher oder
entsprechender Type, wie vom Hersteller empfohlen. Entsorgen Sie Batterien
nach Anweisung des Herstellers.
23. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt
70dB(A) oder weiger.
Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend der IEC-
704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in
diesem Zusammenhang getätigten Aussagen ab.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual viii
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ix PCM-9562 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ...............................................................................................2
1.2 Product Specifications...............................................................................2
1.3 Chipset......................................................................................................3
1.3.1 Functional Specifications..............................................................3
1.3.2 Mechanical Specifications.............................................................5
1.3.3 Electrical Specifications................................................................5
1.3.4 Environmental Specifications........................................................6
Chapter 2 Hardware Installation ..........................7
2.1 Jumpers ....................................................................................................8
2.1.1 Jumper List ...................................................................................8
2.1.2 Jumper Settings............................................................................8
2.1.3 Jumper Description.......................................................................9
2.2 Connectors..............................................................................................10
2.2.1 Connector List.............................................................................10
2.2.2 Connector Settings .....................................................................11
2.3 Mechanical..............................................................................................15
2.3.1 Jumper and Connector Location.................................................15
Figure 2.1 Jumper and Connector Layout (Component Side)...15
Figure 2.2 Jumper and Connector Layout (Solder Side)...........16
2.3.2 Board Dimensions.......................................................................17
Figure 2.3 Board Dimension Layout (Component Side)............17
Figure 2.4 Board Dimension Layout (Solder Side)....................18
Chapter 3 BIOS Settings.....................................19
Figure 3.1 Setup program initial screen.....................................20
3.1 Entering Setup ........................................................................................20
3.2 Main Setup..............................................................................................20
Figure 3.2 Main setup screen ....................................................21
3.2.1 System time / System date.........................................................21
3.3 Advanced BIOS Features Setup.............................................................21
Figure 3.3 Advanced BIOS features setup screen ....................22
3.3.1 CPU Configuration......................................................................22
Figure 3.4 CPU Configuration Setting .......................................22
3.3.2 IDE Configuration........................................................................23
Figure 3.5 IDE Configuration.....................................................23
3.3.3 Floppy Configuration...................................................................24
Figure 3.6 Floppy Configuration ................................................24
3.3.4 Super I/O Configuration..............................................................24
Figure 3.7 Super I/O Configuration............................................24
3.3.5 Hardware Health Configuration...................................................25
Figure 3.8 Hardware health configuration..................................25
3.3.6 ACPI Settings..............................................................................26
Figure 3.9 ACPI Settings...........................................................26
Figure 3.10General ACPI Configuration.....................................26
Figure 3.11Advanced ACPI Configuration..................................27
Figure 3.12Chipset ACPI Configuration......................................27
3.3.7 AHCI Configuration.....................................................................28
Figure 3.13Advanced ACPI Configuration..................................28
3.3.8 APM Configuration......................................................................29
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual x
Figure 3.14APM Configuration ................................................... 29
3.3.9 Event Log Configuration............................................................. 30
Figure 3.15South Bridge ACPI Configuration............................. 30
3.3.10 MPS Configuration...................................................................... 30
Figure 3.16South Bridge ACPI Configuration............................. 30
3.3.11 SMBIOS Configuration ............................................................... 31
Figure 3.17South Bridge ACPI Configuration............................. 31
3.3.12 USB Configuration...................................................................... 31
Figure 3.18South Bridge ACPI Configuration............................. 31
Figure 3.19USB Mass storage Device Configuration................. 32
3.4 Advanced PCI/PnP Settings................................................................... 32
Figure 3.20PCI/PNP Setup (top)................................................ 33
3.5 Boot Settings........................................................................................... 34
Figure 3.21Boot Setup Utility...................................................... 34
3.5.1 Boot settings Configuration......................................................... 34
Figure 3.22Boot Setting Configuration ....................................... 34
3.6 Security Setup......................................................................................... 35
Figure 3.23Password Configuration ........................................... 35
3.7 Advanced Chipset Settings..................................................................... 36
Figure 3.24Advanced Chipset Settings...................................... 36
3.7.1 North Bridge Chipset Configuration............................................ 36
Figure 3.25North Bridge Configuration....................................... 36
Figure 3.26Video function configuration..................................... 37
3.7.2 South Bridge Chipset Configuration ........................................... 38
Figure 3.27South Bridge Configuration...................................... 38
3.8 Exit Option .............................................................................................. 39
Figure 3.28Exit Option................................................................ 39
3.8.1 Save Changes and Exit.............................................................. 39
3.8.2 Discard Changes and Exit.......................................................... 39
3.8.3 Load Optimal Defaults................................................................ 39
3.8.4 Load Fail-Safe Defaults.............................................................. 39
Chapter 4 Software Introduction & Installation41
4.1 S/W Introduction ..................................................................................... 42
4.2 Driver Installation.................................................................................... 42
4.2.1 Windows XP Professional........................................................... 42
4.2.2 Other OS..................................................................................... 42
4.3 Value-Added Software Services............................................................. 42
4.3.1 SUSI Introduction........................................................................ 42
4.3.2 Software APIs............................................................................. 43
4.3.3 SUSI Utilities............................................................................... 44
4.3.4 SUSI Installation......................................................................... 44
4.3.5 SUSI Sample Programs.............................................................. 46
Chapter 5 Extension I/O Installation................. 53
Appendix A Pin Assignments...............................55
Appendix B Optional Extras for PCM-9562 A1....77
B.1 PCM-10586-9562E Cable kit for PCM-9562 A1 ..................................... 78
Table B.1: PCM-10586-9562E Cable kit for PCM-9562 A1....... 78
Appendix C Prog. GPIO & Watchdog Timer........79
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

xi PCM-9562 User Manual
C.1 Watchdog Timer......................................................................................80
C.1.1 First Watchdog (SCH3106).........................................................80
C.1.2 Second Watchdog (MAX6369) ...................................................81
C.2 GPIO Sample Code ................................................................................81
Appendix D System Assignments ........................93
D.1 1st MB memory map...............................................................................94
Table D.1: 1st MB memory map ................................................94
D.2 DMA channel assignments .....................................................................94
Table D.2: DMA channel assignments.......................................94
D.3 Interrupt assignments..............................................................................94
Table D.3: Interrupt assignments...............................................94
Table D.4: System I/O Ports ......................................................95
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual xii
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Chapter 1
1General Information
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual 2
1.1 Introduction
Intel® N450/D510 processor
EBX form factor standard, supports PC/104 plus
One SODIMM up to 2G DDR2 667/800MHz
Dual Display: VGA + LVDS
Supports 8 x USB 2.0 ports
Supports 3 x SATAII
Supports up to 6 x COM (Support Auto flow control)
Supports up to 2 x Watchdog Timer
Supports up to 3 x Intel Giga Ethernet support
UL60601 design in GbE3 and COM6 (Full version only, UL60601 cert is for
Medical )
Supports Wake-on-LAN, Wake-on-Modem
Power off protection and Software I2C API support
1.2 Product Specifications
General
I/O
Ethernet
CPU N450/D510 1.6GHz
L2 Cache 512KB/1MB
System Chipset N450/D510 + ICH8M
BIOS AMI 16Mb SPI BIOS
System Memory One SODIMM up to 2GB DDR2 667/800MHz
Power Management APM1.2, ACPI support
SSD CF card type I/II
Watchdog Timer
WD1: Can be IWD and PWD 10ms, disable, 1sec and 60sec interval timer
WD2: PWD (Full version only) 255-level interval timer, setup by software, Super I/O inte-
grated, SMSC Controller
Expansion Interface Supports PC-104 plus, PCI slot x1, Mini PCIe
Battery Lithium 3 V / 196 mAH
I/O Interface 1 x CF, 3 x SATAII, 1 x K/B, 1 x Mouse, 4 x RS232 (COM6 ,UL60601 design, is full version only), 2 x RS232/422/485 (Default RS-422/485,
RS-232 with TX/RX only is optional by request), 1 x LPT
USB 8 x USB 2.0 compliant Ports
Audio AC97, Line-in, Line-out, Mic-in, speaker out (R/L)
IrDA - 115kbps (optional by request) shared from COM2
GPIO 16-bit general purpose
Chipset GbE1 : Intel 82567, GbE2 : Intel 82583V, Optional GbE3: Intel
82583V (UL60601 Compliant)
Speed 10/100/1000Mbps
Interface 3 (RJ-45 connector through the cable and GbE3 is full version only)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

3 PCM-9562 User Manual
Chapter 1 General Information
Display
1.3 Chipset
1.3.1 Functional Specifications
1.3.1.1 Processor
Intel N450/D510 processor 1.6GHz (512KB/ 1MB)
CPU Process: 45nm.
667/800 MHz FSB Support
1.3.1.2 Chipset
1.3.1.3 Chipset (ICH8-M)
Standard IEEE 802.3u 100Base-T & IEEE 802.3ab 1000Base-T for 10/100/
1000Mbps optional
Controller Embedded Gen3.5+ GFX Core
VRAM Shared Memory Architecture up to 224 MB system memory
LVDS LCD Single channel 18-bit LVDS up to WXGA 1366 x 768
VGA Supports up to SXGA 1400 x 1050 @ 60 Hz for Atom N450, up
to 2048 x 1536 for Atom D510
Dual Independent Display VGA+ LVDS
North Bridge
Controller Hub Intel® N450/D510
FSB 667/800 MHz
Memory DDRII 667/800 SDRAM
Display
Chipset Intel® N450/D510 +ICH8M
Dual independent display VGA+LVDS(18-bit) (Supports Clone and Twin mode)
VGA Memory Up to 224 MB of dynamic video memory allocation
Display
VGA:
Supports QXGA Up to 2048 x 1536
LVDS:
Resolution up to 18 bpp, XGA (1024 x 768) and WXGA
(1280 x 800)
Internal Graphics Features
* Intel 3.5 Gen Integrated Graphic Engine + GFX core
* DVMT 3.0 (Dynamic Video Memory Technology)
* Directx* 9 compliant Pixel Shader 2.0
* 2 display ports: LVDS and VGA
* Intel® Clear Video Technology
I/O Interface
LPT 1 (FDD is optional)
RS-232 4 (COM6 ,UL60601 design, is full version only)
RS-232/422/485 2 (RS-232 with TX/RX only is optional by request)
K/B 1
Mouse 1
USB 8 x USB 2.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual 4
1.3.1.4 Others
Audio HD Audio, ALC888 Codec, Line-in, Line-out, Mic-in, speaker out (R/L)
(Supports 8Ω1W or 4Ω2 W Speaker for Speaker-out)
GPIO 16-bit GPIO
IrDA 115 kbps (optional by request) shared from COM2
South Bridge
Controller Hub ICH8M
PCI Compliant PCI 2.3
PCI Bus * PCI masters
PC/104-Plus (ISA doesn't support DMA)
Other Features
* 8 x USB 2.0 ports, 480MB/s (all internal connectors)
Default: 500mA @ one port (Up to 1A @ 2 ports)
* 3 x SATAII (Max. Data transfer Rate 300MB/s)
* HD Audio CODEC (ALC888)
* Power Management (S0, S1, S3,S4, S5)
BIOS 16 Mb Flash BIOS via SPI
Ethernet
Chipset GbE 1 : Intel 82567V GbE 2: Intel 82583V
GbE 3: Intel 82583V (UL60601 design, optional)
IEEE Compliant Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE
8023y, IEEE 802.ab
Disable LAN through BIOS Yes
Driver Support WES7/Windows XP/XP Embed/CE, Linux, QNX
Audio
Codec HD Audio, ALC888 Codec
Connector Line in, Line out, Mic in, Speak out (R/L, 8 Ohm 1W/4Ohm
2W)
Hardware Monitor
Super I/O LPC I/O for onboard alarm
SCH3106
Fan
1. Smart FAN Support.
2. Programmable automatic fan monitor based on tempera-
ture.
3. 2 pin connector for LED indication when fan fail or system
abnormal.
4. System FAN Power Connector x 1
5. Reserve CPU FAN Power Connector x 1
Pin2: +12 V
Pin3: Fan speed signal input
Temperature CPU Temperature
Voltage 3.3 V,+5 V, +12 V, Vcore
PCI to ISA
Chipset ITE8888G (ISA DMA not supported)
Second watchdog timer
Pin -Selectable Watchdog
Timer MAX6369KA-T Watchdog Timers
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

5 PCM-9562 User Manual
Chapter 1 General Information
1.3.2 Mechanical Specifications
1.3.2.1 Dimensions (mm)
203mm(L)*146mm(W) (8" x 5.75")
1.3.2.2 Height on Top (mm)
PCM-9562N-S6A1E: 15.4mm (PCI slot)
PCM-9562D-S6A1E: 25mm (CPU Cooler)
1.3.2.3 Height on Button (mm)
8.5mm (CF socket)
1.3.2.4 Heatsink/Cooler Dimensions (mm)
50*50*10 mm (Heatsink for PCM-9562N-S6A1E)
50*50*25 mm (Cooler for PCM-9562D-S6A1E)
50*50*30 mm (Heatsink for Extended temp product)
1.3.2.5 Weight (g) with Heatsink
850 g
1.3.3 Electrical Specifications
1.3.3.1 Power Supply Voltage
Power Type
AT/ATX
Power Supply Voltage
ATX: 12V/ 5V stand-by ± 10% (5V stand-by power is only for auto power off
function)AT: 12 V ±10% only
1.3.3.2 Power Supply Current
Test Condition:
Add-in Card - None
MiniPCIe Card - None
HDD - 3.5" WD 80GB SATA2 *1
KeyBoard/Mouse - USB or PS/2 Interface
Display - VGA
Condition
Power Consumption (A or mA)
Voltage/
Condition Power on - Boot procedure DOS Idle Mode Win. Idle Mode BurnIn (10minutes) Testing Software
+12 V 926 mA 1037 mA 893 mA 1187 mA BurnIn
5 VSB 9 mA 8 mA 8 mA 10 mA
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCM-9562 User Manual 6
1.3.3.3 RTC Battery
Typical Voltage: 3.0 V
Normal discharge capacity: 196 mAh
1.3.4 Environmental Specifications
1.3.4.1 Operating Temperature
Operating temperature: 0 ~ 60°C (32~140°F)
1.3.4.2 Operating Humidity
Operating Humidity: 0% ~ 90% Relative Humidity, non-condensing
1.3.4.3 Storage Temperature
Standard products (0~60°C)
Storage temperature: -20~70°C
1.3.4.4 Storage Relative Temperature
Standard products (0~60°C)
Relative humidity: 95% @ 60°C
Phoenix products (-20~80°C)
Relative humidity: 95% @ 60°C
Platinum Phoenix products (-40~85°C)
Relative humidity: 95% @ 60°C
Condition Power Consumption (A or mA)
Voltage/Condition Boot to DOS prompt mode
CPU type:
Max. memory slot Qty: #
size/pcs: 256MB
+12 V 998 mA
5 VSB 8 mA
CPU type:
Max. memory slot Qty: #
size/pcs: 512 MB
+12 V 989 mA
5 VSB 8 mA
CPU type:
Max. memory slot Qty: #
size/pcs: 1GB
+12 V 1096 mA
5 VSB 8 mA
CPU type:
Max. memory slot Qty: #
size/pcs: 2 GB
+12 V 1058 mA
5 VSB 8 mA
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Chapter 2
2Hardware Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com