ADVANTEST TQ82000 Series User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

ADVANTEST.
ADVANTEST CORPORATION
7082000 Series
Optical Sensor/Block
Operation Manual
MANUAL NUMBER FOB-8324198D00
Applicable Optical Sensors/Blocks
TQ82010
TQ82011
T082015
Q82014A
Q82017A
082018A
082021A
Q82024
©1989 ADVANTEST CORPORATION
All rights reserved. Printed in Japan
First printing September 26, 1989

Certificate of Conformity
CE
This Is to certify, that
Optical Power Meter
TQ8210,TQ82015,Q82014A,Q82017A,Q82018A
instrument,type,designation
complies with the provisions of the EMC Directive 89/336/EEC in accordance with
EN61326 and Low Voltage Directive 73/23/EEC in accordance with EN61010.
ADVANTEST Corp. ROHDE&SCHWARZ
Tokyo, Japan Engineering and Sales GmbH
Munich, Germany
8210.01

CONTENT
1. OUTLINE 2
2. CONNECTION OF OPTICAL POWER METER AND
OPT I CAL BLOCK/OPT I CAL SENSOR ----- - --- - 2
3. SPEC I F I CAT IONS 3
4. MONITOR CHARACTERISTICS
(IN PEAK POWER MEASUREMENT)
5. LED LIGHT SOURCE (EQUIPPED IN T082011 ONLY) -- 5
6. CHANGING PROCEDURE FOR 082024 SENSOR POSITION •----- 6
7. EXTERNAL VIEW 7
7082011, 082014A, 7082015, 082017A 7
082018A, 1182021A 8
082024 9
Calibration
Z
Calibration work should be performed at an ADVANTEST CORPORATION site.
When you want to calibrate the analyzer, please contact a sales representative.
(VEitIiihn^a)?; I_LIfftgL fs19 it.
*ffotsatzov,--c!±, t 1.00)
Desirable Period Iyear
1

tOUTLINE
TQ82000 series optical sensor is connected with power meter (TQ8210/Q8214A
/T08215).
Regarding how to use, please refer to instruction manual of each power meter.
)
2. CONNECTION OF OPTICALPOWER METER AND
OPTICAL BLOCK/OPTICAL SENSOR
Optical Optical Optical Optical Optical
Power Meter Sensor Power Meter Block Sensor
70821Q: Q82014A
L
—1 TQ82015
Q82017A
Q82018A
—1 Q82024
TQ8215 T082011
TQ82010
(Standard)
Li082021A
082014A
__I TQ82015
—1 Q82017A
-] Q82018A
- -I 082024
2

3. SPECIFICATIONS
Optical sensor 082014A T082015 Q82017A Q82018A
Wavelength range 400 to 1100
nm
800 to 1600
nm
400 to 1100
nm
800 to 1650
nm
Photoreceptor
element
Si PIN
Photo diode
Ge
Photo diode
Si PIN
Photo diode
InGaAs PIN
Photo diode
Input type Photo diode direct-in FC connector''
Photoreceptor
area
Approx.
8mm0
Approx.
5mm 0
Approx.
10 x1Omm0
___
Power range's -60dBm to
+17dBm
(1nW to 50mW)
-40dBm to
+10dBm
(100nW to 10mW)
-60dBm to
+17dBm
(1nW to 50mW)
-60dBm to
+0dBm
(1nW to 1mW)
Standard
wavelength 850nm 1300nm 850nm 1300nm
Optical Block TQ82011 Q82021A
Optical sensor -- --
Wavelength range 400 to 1100nm
Photoreceptor
element
Si PIN Photo diode
Input type FC
connector"
Photo diode
direct-in
Photoreceptor
area --- Approx. 10 X 10mmO
Power range's
-60dBm to
+10dBm
(1nW to
10mW)
-60dBm to
+17dBm
(1nW to
50mW)
Standard
wavelength 850nm
*1: Regarding connectors not
described herein, please
contact with us.
*2: At the case of standard
wavelength respectively
*1:Eak:14091:-)1,%T
12144.:4BATLI.
4A-Tt.
(Note) The 082014A, Q82017A or Q82021A may lose wavelength sensitivity in the 400nm
band when used in very humid conditions. These sensors should not be used in
an environment at high temperatures or humidities when measurements are taken
in the 400nm band. Other bands are not affected, so measurements can be taken
freely.
(it) Q82014A, Q82017A, Q82021A 400nm *4:-..tswrffili€03Eilit-fe.1I, itit&S/thl&
*1:.411:1-"Clo< .1"01114litorAltIts WMAiicORtig-Ft-it
11V1-lot:195, 1100nm*TBBRI-4-64,1•12, ""et
-C tie
tits, 400nm *1;140i5tRizts‘%--C1I, ;:(7).:t iSfrBgAititiez:
3

4
3.5 inch magnetic optical
disk sensor Q82024
Wavelength range 400 to 1100nm
Photoreceptor element Si 10mmo
Power range -60dBm to +17dem 1nW to 50mW
Measurement accuracy 1: 0 . 1 5 dB
780nm
OdBm .
at 23± 3°C
±3.0%
780nm
1mW
at 23± 3"C
± 0.20dB
780nm
OdBm
at 0 to 40°C
±4.0%
780nm
1mW
at 0 to 40"C
Resolution 0.01dB 0.1% to 0.005%
Range 10dB step, 8 range
Dimensions, Mass Approx. 90(W)x 94(H)x 6(D)mm, 110g or less
Using ambient conditions 0to +40*C , R4.185% or less
Storage temperature range -25 to +70"C
Connection with
optical power meter TQ8210, TQ8215 or Q8214A

4. MONITOR CHARACTERISTICS (IN PEAK POWER MEASUREMENT)
Type TQ82011 Q82021A
Range 2mW(+3dBm) 200u W(-7dBm) 20mW(+13d8m)
Gain 0.5mV/uW 5mV/mW 50mV/mV
Photo-
receptor
range
Max." 500gi4-3ea) 100#10-10dBm) 10mW(+10d8m)
Min." 1004-200m) 2gW(-27dBm) 0.2mW(-7dBm)
Demodulation
band (100kHz as
astandard)
DC to 15MHz:±ldBopt
15MHz to 30MHz
:±1dBopt
DC to 10MHz:±1dBopt
10MHz to 20MHz -
:±ldBopt
DC to 30MHz: ±:d8opt
30MHz to 50MHz
:±;dBopt
Output impedance 50114±5Q(BNC connector) 50C/±50
(BNC connector)
*1: The maximum limit is the maximum at which the response is linear.
The minimum limit is the rms signal level at which the noise peak-to-peak
value is the same (TSS sensitivity).
*1: Siti).--:•7 0)311/clig.
it /1N $1 Noise p-phi! k I.: 1i o tt , *ph LTA, )1, fit (TTSEISItt )e
5. LED LIGHT SOURCE (EQUIPPED IN T082011 ONLY)
Center wavelength
Level
Half-width
Sensitivity
Max. output power
Min. output power
Breakdown input voltage
Demodulation band
Input impedance
:850± 25nm
:-20±1dBm
:Approx. 55nm
:Approx. 30# W/V
:Less than -60d8m (input voltage -0.1V)
:More than -17dBm (output voltage +0.7V)
±3V
100kHz as a standard
DC to 10MHz : AldBopt
10MHz to 20MHz : ±1dBopt
:50±5Q(BNC connector)
5

6. CHANGING PROCEDURE FOR 082024 SENSOR POSITION
a) Loosen the screws on the center of the sensor front side (side of product
name printed).
Open the shutter, slide the Photoreceptor section at the rear side.
(() Tighten the screws at the sensor front side.
1:18202110) E iA •
C). t , g7c IIPI (WI t75( A Ili LI a ) its I: E- 7 °.1
Ci) —frISIIf. J4f1U10^*66 •-3 4 K
®2zmg L-A a, 6 I
6

7. EXTERNAL VIEW
37 88
....
CD
CO
0.; 0
000
0o
0o
(11)
cli-izzawnms
"I
180.0
J
00
TC182011
082014A/7'082015
z...--z-- ct i:
Q82017A
Unit; mm
7

22 GO
180
48 101905 (1.5m)
0=1,,,,,„
Q82018A
13 5, 88
5
—11117== E:=0.61,1711
DO111—
1.5m
tn.
CO
Q82021A
Unit; mm
8

47.5mm
CO
a
00
CD
NJ
4=m
Approx. 700mm
_P700mm
94mm
123mm min.
14\23mm
PD center max : 39mm
PC:144.,139mm
!Maximum possible
!for masurement : 41mm
NVAIX41mm
m
O
Distance from the case bottom
to the photoreceptor : 3mm
it-71Etre9
RYEtTOSENt3mm
1

°o)14/.1.704-Tt3
Tis(om_TIR#41T-t-Ig74-4MX,)-U(F-1434Wqp1'q'4
1A14-14'1:1 o°0401211(444,)-WW0.1411WW(0111,P,P4M*Yastg
'=:(-43r42'Iblta>*144•
-z,4-Ea1,1.104POW4VN**
00.1).o*41411kato1mWEI44.7:c0L=41L(:*svIMFt
TI4
'4-Tizio3o5S*WM3M
'T1Rar
°J-T.-14:1RttMktuffl—qkliMgoL4c.r.*
°-t-Tle4-VVWWD**VgVMIT4-gr.Tg6*=U29*4—'!coM
4—,“"i4-/TqT.4.4nATO'K'nTScg(D=r2T140,11:10gq4TuA*4
4—r?/ES111444:14MXSUr2.1:13*'TI:IiT4 -I LA c.o.)-7,-2
?(DA_I:1isic.:1t144.1.:20 (I- 7. 4-1 4- (*,LY:1) -L.' 4'1 L. (‘ 9-1-1V4*
4,1 Stt T47:1%91*

fg111::.-Do-r
RA01.*WMMU.J.34LMR0A094b4ZPAIE'A-R5,14A0MANf/AJ--Aikilvo-c110MH)7)4,1mLotl.
Lto RiE)Or4.4, 1.1.o) ltte) Wit ±o”-Srit: 19 141A7S'AM L poccolot.-. L to t.L.t.q„ T,i8
•tAft11, 1UiE4/111114,-)-_,-Ct1nE0D)Mh‘OVI-tl-T.-1.,tzt,-f Ito
•'illiS'itet-Cots
•MILIV0,1-.151,6)(61SA 141){11.L.Phi
•PORMIC:kR-4-LICI1lfr4t- 'HCIJ L±P (V) izt.:,11V043 'AO ZIWTO2 I- Y.1 tJ1CAVI-lb,it-,f.:ivtiej
•ic#,11.417,11i1M4.0.9.i--c14a0MLLMhMkgc)3M,,t7,17M74,..,MJC*.:/7.4E1011MolAft,ggcnt
-y-db L')
•IIMR0)14/ t.:1115-itt!Nc--,,-,-,- 7 (I' ) 7C 4•TR r 1- 14!I-II IttJ
•)1.1t.1 TRA-
•Mtf.A.4gtti,lt,:lt-i-5 <
• )(X, T,- .7. A1 t .1 2A 4 w, F z,
•niy_4i1_4411.',1.t.--1.gf-,
•14N, “Vfl-r- tsip,t.:c_.- ZIR*.1-3 U31**114.
/16)VA0)1,1&1±, *11ZIMHAC:;CR-1- rt-JV,!..-_rill;ti.z, Co-)L
.R=4-1:111-4-6tsrplotb--(z-Do-C
RAMIllt:i)t.:ZIPAIfitia)IVII, EMMA or) F ire1p 1- ''.V111-7,t.1-&51,,":7 -7- .X "C' 7)4,N-1114 eLtz'AU.
•L
t 1- -7 II. tkr#,:c LopT14: cp$MOik 1) ifi9-gioR)V1rAlIzbt.:7,II*0)1illiEitEv: 7 -f L
•thiMcf4.,:c L"6')&t13#b'RIL./lA • ,{ '7± f/ 3• -h 4 (SIC) (r: o0
tsg &M TV — E 7
•wairoviorgi
Vgg)04-t- Atcr,t(i. 1,4go)ivimkio-TRIL
•'V.-T-1Y - E
#1-.6DZ+1-411ligrA1477,5t3t L
111'09 OJT, 1 Wo1K
Nr51:143ZT ) —
•4,'ZE-9--E
4:#1- L. glIi.r.TfittVita)44-R.1
0DT, VIE& o'211A
1&11. L.
•tZE-9- - E Ago
ttiEgt i6")1U, /1'00' - 2, • :/ 3 •
7., 4 (SIC) "CV)t:. t.f <,1411
itiAtT/itt:I.WaL-CoMISKIE4:1-AMot.:
5NdrA455tilli-CAX
ADVANTEST
13Mgc-1-'0)t-sttli5
Agl1A4.3
7„),<61,7,,TA L.-COL/7:4, SEMan3Z
tfE,Z L o 7AiEts7Z.MIAR“-;8g-CIVII Lkli
IOC:nL-c-II, 01.43 ,k
7:Lan 'its1. 7)-. 4fls:P3<'.:/6,
TIViAcirTF-AA&-0--Zi01.1
tk--Cot-to
14A6') t78il
P-(4.0),tffi t <" ee), z
TmR1,0>vik to
4715, Itli18kik.15 et OltifWV:
rAmtmi)v) store, 840 0.1M.VAAJX4:#311110
F
Va0D-,i4n-A.Pt:..t 13Vlb'IR'kg -Dt:413-6)Mio)
A1111,4zIRMAHAft1:IVIE#72-1,, oi:PR-±7 113{,o)
I
IA--3'No L < ±t rbalinn 4:
NtL148., if1.11.14:401LardliVeltlb-r,13'pli:4
1-o
ansitft7K/V>5--Ah
*3± * • Wi MI63-0880 VVE•82•2-4-1 x(03)3342-7500
M9INS4±414100414006069-4) FAX [phone]
1347**I*38* M213-0011 111****H*3-5-7(_-_•)ti*110)1161.) 42(044)850-0500
69••• 1**P1 •179-0071 ematorrl-32-1 6(03)3930.4196
•512•13/143111$ •213-0011 6144*•AEX*3-5-7(,)t-391011E30) se [phone]
NIT4S00E •179-0071 WIAR•211-32-1 12 (03)3930-4127
•* 43 SI163-0880 OVIZ*042.4#1174NS6LA111ii160694}) •• a [phone]
•* A >0 U163-0880 fklE*012-4-1(1141NSEMAtlif,60694) 12(03)3342-8245
▪# 4S * • •163-0680 OhlEa501241(1)*NSOWL1**606911)• 12(03)3342.8245
J R 41 • Id •163-0880 FRE0014il2-4412*NsE331LI1IN60894)11(03)3342-7513
* *, Aa •310-0041 *T•1*±*/,•2-19.3 ••• •••• •• ..... [phone]
•989-3124 fOrtIMItiltE*1*)04,s-2 12(022)392-3103
I10 • * 4f 11213-261 1114817162EA*3-5-7(,,t-41010)E2A54) re [phone]
FP* ni la •213-0311 1114$X*RA*3-5-71•,,NliflaMEA,5F) a(044)850-0500
00 JX •179-0071 0/4G1/11171-32-1 6 (03)3930-4002
•714 a •190-0012 *111$1**2-22-2o ;-•-L30E1F) 12 [phone]
•* # •564.0062 Vffl*M*1973-34 1 12(06)6385-6611
•3t 48 U564-0062 ,kliEM**1173.34 1 12 (06)6385-6611
BIAZ M464-0850 A4-1-29 c=yt-ri.tEio rt [phone]
*24 00 •920-0852 *3±1,7120,17-8 12(076)262-7545
69 al A IN M700-0904 8441.1M(111171.12-1 (a#21±68)1() 42 [phone]
111 30 10 Me12-0011*00$1/130140±163-5-7()03±4-+JO re [phone]
*fig1311b61111,11tbt-5t
TEL [phone]
/37 1-7.-f:/7/X-9ai•t:iNCIC) FAX [phone]
*R5Y(4312 • 4i101,141rM1121t.,),t7J5t
t1E=h)b•li—C.7-t
sig TEL [phone]
FAX [phone]
TEL [phone]
FAX [phone]

IMPORTANT INFORMATION FOR ADVANTEST SOFTWARE
PLEASE READ CAREFULLY: This is an important notice for the software defined herein. Computer programs
including any additions, modifications and updates thereof, operation manuals, and related materials provided by
ADVANTEST (hereafter referred to as "SOFTWARE"), included in or used with hardware produced by
ADVANTEST (hereafter referred to as "PRODUCTS").
SOFTWARE License
All rights in and to the SOFTWARE (including, but not limited to, copyright) shall be and remain vested in
ADVANTEST. ADVANTEST hereby grants you a license to use the SOFTWARE only on or with ADVANTEST
PRODUCTS.
Restrictions
(1) You may not use the SOFTWARE for any purpose other than for the use of the PRODUCTS.
(2) You may not copy, modify, or change, all or any part of, the SOFTWARE without permission from
ADVANTEST.
(3) You may not reverse engineer, de-compile, or disassemble, all or any part of, the SOFTWARE.
Liability
ADVANTEST shall have no liability (1) for any PRODUCT failures, which may arise out of any misuse
(misuse is deemed to be use of the SOFTWARE for purposes other than it's intended use) of the SOFTWARE.
(2) For any dispute between you and any third party for any reason whatsoever including, but not limited to,
infringement of intellectual property rights.

LIMITED WARRANTY
1. Unless otherwise specifically agreed by Seller and Purchaser in writing, ADVANTEST will warrant to the
Purchaser that during the Warranty Period this Product (other than consumables included in the Product) will
be free from defects in material and workmanship and shall conform to the specifications set forth in this
Operation Manual.
2. The warranty period for the Product (the "Warranty Period") will be a period of one year commencing on the
delivery date of the Product.
3. If the Product is found to be defective during the Warranty Period, ADVANTEST will, at its option and in its
sole and absolute discretion, either (a) repair the defective Product or part or component thereof or (b) replace
the defective Product or part or component thereof, in either case at ADVANTEST's sole cost and expense.
4. This limited warranty will not apply to defects or damage to the Product or any part or component thereof
resulting from any of the following:
(a) any modifications, maintenance or repairs other than modifications, maintenance or repairs (i) performed
by ADVANTEST or (ii) specifically recommended or authorized by ADVANTEST and performed in
accordance with ADVANTEST's instructions;
(b) any improper or inadequate handling, carriage or storage of the Product by the Purchaser or any third
party (other than ADVANTEST or its agents);
(c) use of the Product under operating conditions or environments different than those specified in the
Operation Manual or recommended by ADVANTEST, including, without limitation, (i) instances where
the Product has been subjected to physical stress or electrical voltage exceeding the permissible range and
(ii) instances where the corrosion of electrical circuits or other deterioration was accelerated by exposure
to corrosive gases or dusty environments;
(d) use of the Product in connection with software, interfaces, products or parts other than software,
interfaces, products or parts supplied or recommended by ADVANTEST;
(e) the occurrence of an event of force majeure, including, without limitation, fire, explosion, geological
change, storm, flood, earthquake, tidal wave, lightning or act of war; or
(f) any negligent act or omission of the Purchaser or any third party other than ADVANTEST.
5. EXCEPT TO THE EXTENT EXPRESSLY PROVIDED HEREIN, ADVANTEST HEREBY EXPRESSLY
DISCLAIMS, AND THF. PURCHASER HEREBY WAIVES, ALL WARRANTIES, WHETHER EXPRESS
OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, (A) ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND (B) ANY
WARRANTY OR REPRESENTATION AS TO THE VALIDITY, SCOPE, EFFECTIVENESS OR
USEFULNESS OF ANY TECHNOLOGY OR ANY INVENTION.
6. THE REMEDY SFT FORTH HEREIN SHALL BE THE SOLE AND EXCLUSIVE REMEDY OF
THE PURCHASER FOR BREACH OF WARRANTY WITH RESPECT TO THE PRODUCT.
7. ADVANTEST WILL NOT HAVE ANY LIABILITY TO THE PURCHASER FOR ANY INDIRECT,
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOSS OF ANTICIPATED PROFITS OR REVENUES, IN ANY AND
ALL CIRCUMSTANCES, EVEN IF ADVANTEST HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES AND WHETHER ARISING OUT OF BREACH OF CONTRACT,
WARRANTY, TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE), STRICT
LIABILITY, INDEMNITY, CONTRIBUTION OR OTHERWISE.

CUSTOMER SERVICE DESCRIPTION
In order to maintain safe and trouble-free operation of the Product and to prevent the incurrence of unnecessary
costs and expenses, ADVANTEST recommends a regular preventive maintenance program under its maintenance
agreement.
ADVANTEST's maintenance agreement provides the Purchaser on-site and off-site maintenance, parts,
maintenance machinery, regular inspections, and telephone support and will last a maximum of ten years from
the date the delivery of the Product. For specific details of the services provided under the maintenance
agreement, please contact the nearest ADVANTEST office listed at the end of this Operation Manual or
ADVANTEST's sales representatives.
Some of the components and parts of this Product have a limited operating life (such as, electrical and
mechanical parts, fan motors, unit power supply, etc.). Accordingly, these components and parts will have to be
replaced on a periodic basis. If the operating life of a component or part has expired and such component or part
has not been replaced, there is a possibility that the Product will not perform properly. Additionally, if the
operating life of a component or part has expired and continued use of such component or part damages the
Product, the Product may not be repairable. Please contact the nearest ADVANTEST office listed at the end of
this Operation Manual or ADVANTEST's sales representatives to determine the operating life of a specific
component or part, as the operating life may vary depending on various factors such as operating condition and
usage environment.
CLAIM FOR DAMAGE IN SHIPMENT TO ORIGINAL BUYER
The product should be thoroughly inspected immediately upon original delivery to buyer. All material in the
container should be checked against the enclosed packing list or the instruction manual alternatively.
ADVANTEST will not be responsible for shortage unless notified immediately.
If the product is damaged in any way, a claim should be tiled by the buyer with carrier immediately. (To
obtain a quotation to repair shipment damage, contact ADVANTEST or the local supplier.) Final claim and
negotiations with the carrier must be completed by buyer.
SALES & SUPPORT OFFICES
Advantest(Singapore)Pteltd.
438A Alexandra Road
#08-03/06 Alexandra Technopark Singapore 119967
Phone : [phone] Facsimile : 65-274-4055
ROHDE & SCHWARZ Engineering and Sales GmbH
Milildorfstr. 15 (F.O.B. 80 1429, D-81614 Munichen)
D-81671 Munichen, Germany
Phone : [phone] Facsimile : 49-89-4129-13723
TEKTRONIX 1NC.
P. O . Box 500, M/S 39-520, Beaverton, Oregon 97077-0001
or
Howard Vollum Industrial Park, M/S 58-743, Beaverton, OR, 97077, U.S.A.
Inside the U.S. 1-800-426-2200
Outside the U.S. 1-503-627-1933
—Technology Support on the Leading Edge
ADVANTEST®
ADVANTEST CORPORATION
Shinjuku-NS Building, 4-1, Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0880, Japan
Phone:[phone] Facsimile,81-3-5322-7270 Telex:232-4914 ADVAN J

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra