Aeon Labs Aeotec Bypass User manual
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
View the expanded manual:
http://aeotec.com/support
Aeotec by Aeon Labs Bypass.
Aeotec Bypass is a capacitive device and can only be
used for Aeotec Nano Dimmer. When your Nano Dimmer
connects LED lights or energy saving compact uorescent
lamps, the Bypass can prevent ickering of the LED light
when dimming off the light and glowing of the turned off
compact uorescent lamp.
When the Nano Dimmer is installed by 2-wire system, you
may need to connect a low power load (E.g. an LED light
or compact uorescent lamp within 4W) to be controlled.
In this case, the Nano Dimmer may not get enough power
from the AC power supply, so a bypass can be added
to act as a dummy load to help your Nano Dimmer get
enough power from the power supply.
Familiarize yourself with your Bypass.
Warning: The main circuit breaker or fuse must be shut off
during the Bypass installation.
1. Install the Bypass in parallel with the bulb load.
2. Install the Bypass on the Nano Dimmer’s terminals.
Use the wire stripper or wire knife to peel off the
insulated part and then expose the metal part of the
Bulb’s 2 connection wires.
Note: this Bypass installation can only be used when your
Nano Dimmer is installed by the 3-Wire system (as shown
in diagram below).
In 3-Wire system, the Bypass can be connected to
the Nano Dimmer’s “N” and “OUT” terminals directly if
needed. As shown below:
Model number: ZW150
Connect the Bypass to the Bulb’s 2 connection wires,
as shown below:
Use the insulation tape to wrap the connection points to
avoid electric leakage or electric shock.
a.
b.
c.
(Wiring diagram of 3-Wire system)
(Wiring diagram of 2-Wire system) Technical specifications.
Install Bypass.
Bypass
1
2
3
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Touch
panel
Live
Neutral
LNCOM
OUT S1 S2
Bypass
Bypass
(Wiring diagram of 3-Wire system)
LNCOM
OUT S1 S2 Touch panel
Live
Neutral
LNCOM
OUT S1 S2 Touch panel
Live
Bypass
Neutral
Power input: 120VAC to 240VAC, 50Hz/ 60Hz.
Max power consumption: 1W.
Operating temperature: 0°C to 40°C /32°F to 104°F.
Relative humidity: 8% to 80%.
Dimensions:19.2×26.7×10.6mm
Warranty.
If you are in need of any technical support during or
subsequent to your products’ warranty, please get in
touch with our support team via http://aeotec.com/
support. The Company you bought this product from has
also guaranteed to assist you with any of your support
needs, and you can also contact them for accordingly.
This guarantee made by the company who you purchased
the product from includes the transfer of Aeon Labs’ full
warranty to that Company. They’ve guaranteed that they’ll
be able to assist you, the Customer, with all technical
support and repair needs on our behalf.
Aeon Labs warrants to the original purchaser of Products,
that is the Company who you have purchased from,
that for the Warranty Period (as defined below), the
4
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR
DRY LOCATIONS. DO NOT IMMERSE IN WATER. NOT
FOR USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment has been tested and found to
1
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV
technician for help.
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available.
Warning
Certifications (regional):
Version: -AA www.aeotec.com
Products will be free from material defects in materials
and workmanship. The foregoing warranty is subject to
the proper installation, operation and maintenance of the
Products in accordance with installation instructions and
the operating manual supplied. Warranty claims must be
made to the Company who you have purchased from
in writing within thirty (30) days of the manifestation of a
problem.
Aeon Labs' sole obligation under the foregoing warranty
is, at Aeon Labs' option, to repair, replace or correct any
such defect that was present at the time of delivery, or to
remove the Products and to refund the purchase price to
Company.
The Warranty Period begins on the date the Products is
delivered and continues for 12 months. Any repairs under
this warranty must be conducted by an authorized Aeon
Labs service representative and under Aeon Labs' RMA
policy. Any repairs conducted by unauthorized persons
shall void this warranty.
Excluded from the warranty are problems due to
accidents, acts of God, civil or military authority, civil
disturbance, war, strikes, fires, other catastrophes,
misuse, misapplication, storage damage, negligence,
electrical power problems, or modication to the Products
or its components.
Aeon Labs does not authorize any person or party to
assume or create for it any other obligation or liability in
connection with the Products except as set forth herein.
Aeon Labs will pass on to Company all manufacturers’
Material warranties to the extent that they are transferable,
but will not independently warrant any Material. Company
will assist Customer with all warranty, repair, return and
technical support needs, Company must prepay shipping
and transportation charges for returned Products,
and insure the shipment or accept the risk of loss or
damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to
Company freight prepaid.Customer and Company shall
indemnify, defend, and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless
from all demands, claims, actions, causes of action,
proceedings, suits, assessments, losses, damages,
liabilities, settlements, judgments, nes, penalties, interest,
costs and expenses (including fees and disbursements
of counsel) of every kind (i) based upon personal injury
or death or injury to property to the extent any of the
foregoing is proximately caused either by a defective
product (including strict liability in tort) or by the negligent
or willful acts or omissions of Customer or its officers,
employees, subcontractors or agents, and/or (ii) arising
from or relating to any actual or alleged infringement or
misappropriation of any patent, trademark, mask work,
copyright, trade secret or any actual or alleged violation
of any other intellectual property rights arising from or
in connection with the products, except to the extent
that such infringement exists as a result of Aeon Labs'
manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR
LOSS OF PROFITS, REVENUE, OR USE INCURRED
BYCUSTOMER, COMPANY OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR
OTHERWISE EVENIF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY
CAUSE OF ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH
OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS
EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS
WITHRESPECT TO WHICH DAMAGES ARE CLAIMED.
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF
PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE
IN WRITING WITHIN THIRTY (30) DAYS FROM AEON
LABS' DELIVERY, OR THE DATE FIXED FOR DELIVERY
IN THE EVENT OF NONDELIVERY. THE INDEMNITY AND
FCC NOTICE (for USA)
WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
Table of contents
Other Aeon Labs Dimmer manuals
