AEONS Technologies Professional Series User manual

Professional Series Wall-Mounted Enclosure
Models: 6U, 9U, 12U, 15U, 18U, 22U
Owner’s Manual
Rev. 2.5
Applied to Model Series: Pxx06, Pxx09, Pxx12, Pxx15, Pxx18, Pxx22
aeonstech.com
[email protected]
1644 N Maple Street, Corona, CA 92880
www.aeonstech.com/support
Copyright © 2020 Aeons LLC. All rights reserved.
*actual product may vary from picture

1
This manual contains instructions and warnings that must be followed during the
installation and operation of the product. Failure to comply may invalidate the warranty and
cause property damage or personal injury.
Keep the enclosure in a controlled indoor environment, away from moisture, temperature
extremes, flammable liquids and gasses, conductive contaminants, dust, and direct sunlight.
Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not
block, cover or insert objects into the external ventilation openings of the enclosure.
The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt
to unpack, move or install it unassisted. Use a mechanical device such as a forklift or pallet
jack to move the enclosure in the shipping container. Inspect the shipping container and the
enclosure for shipping damage. Do not use the enclosure if it is damaged. Leave the
enclosure in the shipping container until it has been moved as close to the final installation
location as possible.
Use caution when cutting packing materials. The enclosure may be scratched, causing
damage not covered by the warranty. Save all packing materials for later use. Repacking and
shipping the enclosure without the original packing materials may cause product damage
that will void the warranty.
Install the enclosure in a structurally sound area capable of handling the load, or on a level
floor that is able to bear the weight of the enclosure, all equipment that will be installed in
the enclosure and any other enclosures and/or equipment that will be installed nearby. For
permanent wall mounting, be sure to securely fasten the enclosure to the building structure
before operation. Do not place any object on the enclosure, especially containers of liquid,
and do not attempt to stack the enclosures.
Important Safety Instructions
Overview
Thank you for purchasing the AEONS enclosure product.
The AEONS Professional series enclosures accommodate all standard 19-inch rackmount
equipment. They feature premier quality, heavy-duty cabinets in various U sizes for quick and
easy deployment.
Our enclosures include quick-release doors and side panels for convenient maintenance.
Front access doors are reversible for installation flexibility. Front door and side panels are
lockable. An optional rolling caster kit (optional for 15U-22U) is available for easy
maneuvering of enclosures.

2
Parts Identification
Hardware List
F. Side Frame
G. L Bracket
H. Mounting Rail
I. Top Cover
J. Bottom
K. Front Door
L. Side Panel
M. Back Panel
N. Vents
O. Cable Access Cover
P. Latch
Q. Cage Nut Kit
A. M6 Screw
D. M5.5 Conical
C. M5.5 Self-Tapping
E. Wrench
B. M6 Cage Nut
○
O
○
N
○
F
○
I
○
L
○
P
○
L
○
J
○
O
○
F
○
M
○
K
○
H
○
G

3
Assembly Steps
○
H
○
G
○
F
○
A
○
B
Step 1: Install Mounting Rail and L Bracket
Install the vertical Mounting Rails○ H to the Side Frame○ F
at the desired depth using M5.5 self-tapping screws○ C
provided in the kit. Repeat on other Side Frame.
Mount the L Bracket○ G to the vertical Mounting Rail○ H at
desired height, using M6 screws○ A and M6 Cage Nuts○ B
provided. Repeat on other Side Frame.

4
Step 2: Install Bottom and Top Cover
Lay Bottom Panel○ J on a flat surface. Insert
Side Frames○ F with large beam oriented to
the front and secure with M5.5 self-tapping
screws○ C and ○ D. Repeat step to secure
Top Cover○ I to Side Frames. For 15U - 22U
enclosure, please refer to Step 7 for
instruction on installation of casters.
○
I
○
F
○
F
○
J
○
D
○
C
Step 3: Install Back Panel
Attach Back Panel○ M to the
assembly using M5.5 self-tapping
screws○ C.
○
M

5
Step 4: Install Side Panel
Alight the pins at the bottom of Side
Panel○ L to the slots of cabinet frame.
Click the Side Panels○ L into cabinet
frame using the latch on either side.
Step 5: Install Front Door
Insert the fixed pin into door hinge hole
at bottom. Pull down on the spring pin
and slide it into door hinge hole at top
and release. The pin should click into
place and secure the door○ K.
Spring Pin
Fixed Pin
○
P
○
L
○
L
○
K

6
○
C
Install Casters (Optional for 15 - 22U Cabinets):
Secure Casters to the Bottom Panel ○ J of the cabinet with M5.5 Self-Tapping
Screws○ C.
Wall Mounting the Enclosure:
Mount the Enclosure using keyhole cutouts on the frame of the enclosure.
Note: Enclosure must be installed by a qualified technician. Before mounting, use a
level and tape measure to position your mounting area precisely. Use appropriate
fasteners (not included) to secure the enclosure to the wall. A minimum of four
fasteners and appropriately sized fender washers is recommended.
Keyhole
○
M

7
Technical Support
Thank you for purchasing the Aeons product. We intend this manual to guide you through a
smooth installation. Aeons assumes that you are qualified in the servicing of IT equipment
and trained in recognizing any hazards that may occur in the installation of this product. Our
lifetime technical support is an integral part of our commitment to provide industry-leading
solutions. If you ever need help with our product, visit www.aeonstech.com and submit your
Technical Support Request online or email your request to [email protected].
Limitations of Liability
Different wall materials require different type of anchoring devices. Please contact a
specialist for advice on suitable anchoring systems. Aeons is not liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this material.
Aeons assumes no responsibility for the use, application, or reliability of the software or
hardware that you install into the product.
It is highly recommended that installation of this product be performed by a qualified and
experienced installer. Improper installation of this product could result in damage to the
product, other equipment, or personal injury. Aeons cannot be held responsible for damage
to equipment or personal injury resulting from improper use, installation or the misuse of
information presented in this document.
Use of Trademarks and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to Aeons. These
references are for illustrative purposes only and do not represent an endorsement of a
product or service by us, or an endorsement of the product(s) to which this manual applies
by the third-party company in question. Regardless of any direct acknowledgement
elsewhere in the body of this document, we hereby acknowledges that all trademarks,
registered trademarks, service marks, and other protected names and/or symbols contained
in this manual and related documents are the property of their respective holders.