AeroBed V36274 User manual

INFLATION & ADJUSTMENTS
For better protection of this product never fold, unfold or inflate the airbed in temperatures
below freezing, avoid extensive exposure to the sun and protect from contact with sharp
objects and rough ground.
1. Place your rolled-up bed on the floor or other surface free of obstructions or sharp objects.
2. Make certain the Quick Air Release Valve is closed. If the release valve is open, close it by
using 2 thumbs to push cover and snap into valve. Be careful to avoid pushing valve cover
to the right or left as it snaps into the valve opening.
3. Remove the AC plug and cord from the plastic bag and shrink wrap.
4.
Before plugging the pump into the outlet, please confirm that the knob is in the “OFF” position.
5. Plug into any standard polarized 120 Volt AC electrical outlet. North American Electrical
rating: 120 VAC 60 Hz 1.7 A.
(Note: 230 VAC product sold outside of North America).
This product has a polarized attachment plug (one blade
is wider than the other) as a safety feature. This plug will
fit into a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. Do not attempt
to defeat this safety feature.
6. Select the desired firmness by rotating the knob on the pump to SOFT, MEDIUM, or FIRM.
The light next to the chosen setting will be illuminated to confirm successful selection.
The pump will inflate the mattress to the selected firmness setting and then shut off
automatically.
7. Once the desired firmness is reached, the pump will monitor mattress pressure and
quietly add air if the firmness drops below the selected setting. The mattress firmness is
maintained when the Comfort Lock light is illuminated. The product must remain plugged
into the electrical outlet for this feature to remain active throughout the night.
8. To change the firmness of your mattress, simply rotate the knob to the new desired
setting. The pump will immediately adjust the firmness to the new setting and maintain
that selected firmness throughout the night.
9. This product is designed to be used overnight to maintain the mattress at the selected
firmness setting. It is not designed to be in operation for extended periods of time. When
the bed is not in use, please turn the knob to the OFF setting and unplug the power cord
from the electrical outlet. This is a temporary bedding solution and is not intended for
everyday use.
USB CHARGING PORT
1. Your AeroBed®product includes a USB port built into the pump for charging your personal
device. Please adhere to the following guidelines to ensure proper usage.
2. In order to charge your personal device using the included USB port, the pump must
remain plugged into the electrical outlet.
3. Ensure that your charging cable is securely connected to the USB port on the pump and
also to the charging port of the mobile device.
4. Once your device is fully charged, please disconnect the charging cable from the USB port.
AUTOMATIC DEFLATION AND STORAGE
1. To deflate the mattress, simply rotate the knob to the DEFLATE position. The pump will immediately
begin to expel air and will automatically stop when the mattress is completely deflated.
2. For faster deflation, open the Quick Release Valve and allow air to expel. Then, for more
compact storage, close the valve and place the knob into the DEFLATE position. The pump
will expel the remaining air and will shut off automatically when the mattress is deflated.
3. Fold the sides of the bed into the center along its length. Open Quick Release Valve and
tightly roll the bed, pushing any remaining air out, close Quick Release Valve and place the
bed in the convenient carry bag for easy transport and storage.
4. Store your bed in a clean, dry place at room temperature (above 50 °F/10 °C). Storing your
bed under 50 °F (10 °C)
and over 100 °F (38 °C)
may affect its performance
and will not be covered
under warranty.
INSTRUCTION MANUAL
CL1000/RDV
Thank you for joining the AeroBed®family by purchasing one of our products. You can expect top-notch quality, innovation and imagination from every AeroBed®product. You are about to enjoy
the comfort of an AeroBed®product. It is your responsibility to read and always follow the safety, care and maintenance instructions for your new AeroBed®product. This is a temporary bedding
solution and not intended for everyday use. Always instruct and supervise others on your bed’s proper use, maintenance and safety.
IMPORTANT SAFETY
INSTRUCTIONS AND WARNINGS
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
BEFORE USING THIS PRODUCT.
When using an electrical furnishing, basic precautions should always be followed.
Read all of the following instructions before using this furnishing.
To reduce the risk of electric shock always unplug this furnishing from the electrical outlet
before cleaning.
When using an electrical furnishing, basic precautions should always be followed, including
the following: Read all instructions before using (this furnishing).
DANGER
• Productisforindooruseonly.Donotuseoutdoors.ForHousehold/ResidentialUseOnly.
• Thisproducthasnotbeenevaluatedforammabilityorcigaretteignitionresistance.
WARNING
• Useonatsurfacesonly.Bedmaytipoveronunevensurfaces.
• Removeallsharpobjectsfromareawherebedwillbesetupandused.Donotusethis
bed on abrasive surfaces or near pointed/sharp items or surfaces. Bed may puncture.
• Unplugproductwhennotinuse.
• Pumpisnotintendedforextendedperiodsofuselongerthan8hours.Pumpmaystop
working or overheat if it is used for extended periods of time.
• Donotattempttodisassemble,repair,orservicethepump.Noserviceablepartsarecontained
inside. Contact The Coleman Company, Inc. at 3600 North Hydraulic, Wichita, KS 67219,
1-800-835-3278 or TDD 1-316-832-8707 in the United States or Sunbeam Corporation
(Canada) Limited, DBA Jarden Consumer Solutions at 20B Hereford Street, Brampton ON L6Y
0M1, 1-800-387-6161 in Canada for repair and service center information.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
• Unplugpumpbeforeputtingonortakingoffparts.
• Closesupervisionisnecessarywhenthisfurnishingisusednearchildrenordisabledpersons.
• Usethisfurnishingonlyforitsintendeduseasdescribedintheseinstructions.Donot
use attachments not recommended by the manufacturer.
• Neveroperatethisfurnishingiftheplugorcardhasbeendamaged,ifitisnotworking
properly, if it has been dropped or damaged, or dropped into water. Contact the
manufacturer for assistance in these matters.
• Keepthecordawayfromheatedsurfaces.
• Neveroperatethefurnishingwiththeairopeningsblocked.Keeptheairopeningsfree
of lint, hair, and the like.
• Neverdroporinsertanyobjectintoanyopening.
• Donotuseoutdoors.
• Donotoperatewhereaerosolsprayproductsarebeingusedorwhereoxygenisadministered.
• Todisconnect,placetheknobintheOFFposition,thenremoveplugfromoutlet.
• Warning-RiskofinjurytoPersons-donotusethisfurnishingtosupportvideo
equipment such as televisions or computer monitors.
•Thispumpincludesamechanismtoprotectagainsthightemperatures.Whenthe
primary pump runs for an extended period of time, it will automatically shut off to
avoid overheating. Allow the pump 30 minutes to cool down before next use.
• Maximumloadsareasfollows:Queen(600lbs-272Kg),Full(600lbs-272Kg),Twin
(300lbs - 136Kg).
SAVE THESE INSTRUCTIONS
WARNING
This is the closed position. Open Air Release Valve. Close Valve using 2 thumbs.
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor is a means for grounding
to be added to the product. Servicing a double-insulated product requires extreme care and
knowledge of the system, and is to be done only by qualified service personnel. Replacement
parts for a double-insulated product must be identical to the parts they replace.

CARE AND MAINTENANCE
WARNING: Do not attempt to disassemble, repair, or service the pump. No serviceable parts are contained inside. Contact The Coleman Company, Inc. at 3600 North Hydraulic,
Wichita, KS 67219 U.S.A. 1-800-835-3278 or TDD 1-316-832-8707 in the United States or Sunbeam Corporation (Canada) Limited, DBA Jarden Consumer Solutions at 20B Hereford
Street, Brampton ON L6Y 0M1, 1-800-387-6161 in Canada for repair and service center information.
1. Inspect your bed prior to each use.
2. Keep your bed away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your warranty.
3. When not in use, store your bed in a clean, dry place out of extreme temperatures. Product must be at room temperature.
4. Do not store your bed folded inside sofa beds or roll-aways. This may cause damage to your bed and will void your warranty.
CLEANING
DANGER: To reduce risk of electric shock:
Always unplug this furnishing from the electrical outlet before cleaning.
We recommend that you do not let the plush surface of your AeroBed®mattress get wet. Repeated exposure to water or other liquids may cause damage to the plush surface that will not be
covered by your warranty. Should liquid come in contact with the plush surface, blot liquid dry and use a damp cloth to remove any stain. Let surface air dry completely.
You may clean the PVC on the sides and bottom of your bed with a mild dishwashing detergent or household cleaner. Do not use strong chemicals or other compounds. Allow your bed to air dry
completely after cleaning and before storing.
FCC INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
LIMITED EXPRESS WARRANTY
The Coleman Company, Inc. (“us”) warrants to the original purchaser (“you”) that this AeroBed®(“product”) is guaranteed against defects in materials and workmanship for the following periods:
pump and valve, three (3) years from date of purchase; mattress, one (1) year from date of purchase.
OUR EXCLUSIVE OBLIGATION, AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY OR OTHERWISE SHALL BE THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR PARTS
WHICH MAY PROVE DEFECTIVE UNDER THE CONDITIONS OF NORMAL USE DURING THE WARRANTY PERIOD. IN THE EVENT THE PRODUCT OR PARTS CANNOT BE REPAIRED OR REPLACED, YOU
SHALL RECEIVE A PRODUCT OF COMPARABLE VALUE AT OUR EXPENSE. THIS WARRANTY IS NON-TRANSFERABLE, AND IS VALID FOR THE FIRST, ORIGINAL PURCHASER FROM AN AUTHORIZED
DEALER OF AEROBED®PRODUCT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
EXCLUSIONS
Our obligation under this limited express warranty shall not apply if our inspection shows:
A. That the product has been used for other than normal indoor sleeping purposes.
B. Any product or part has been damaged by alteration.
C. Any product or part has been subject to accident, misuse, abuse or has been operated contrary to our written instructions.
WARRANTY REDEMPTIONS
You must obtain an authorization from us before returning a defective product. Call us at 1-800-835-3278 or TDD 1-316-832-8707 in the United States or 1-800-387-6161 in Canada for a return
authorization. The product should be carefully packaged and delivered postage or delivery charges prepaid at the address set forth above. You are responsible for all damages incurred in shipping.
WARRANTY DISCLAIMER
EXCEPT FOR THE LIMITED EXPRESS WARRANTY SET FORTH IN THIS SECTION AND IMPLIED WARRANTIES FOR THE DURATION OF THE EXPRESS WARRANTY, SELLER MAKES NO EXPRESS OR
IMPLIED REPRESENTATIONS. ALL CLAIMS AGAINST US MUST BE BROUGHT WITHIN ONE (1) YEAR FROM THE TIME THEY ARISE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE DISCLAIMER MAY NOT APPLY TO YOU.
LIMITATION OF LIABILITY
TO THE FULLEST EXTENT PERMITTED BY LAW, SELLER SHALL NOT BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WITH RESPECT TO THE SALE OF USE OF THE
PRODUCTS, INCLUDING ANY LOST REVENUES, LOSS OF USE OR LOST PROFITS, REGARDLESS OF THE THEORY BY WHICH ANY CLAIM MAY BE BASED, INCLUDING ANY TORT, TANGIBLE PROPERTY
DAMAGE OR STATUTORY CAUSES OF ACTION. NOTWITHSTANDING THE TERM OF ANY LIMITED OR IMPLIED WARRANTY, OR IN THE EVENT THAT ANY LIMITED WARRANTY FAILS OF ITS ESSENTIAL
PURPOSE, IN NO EVENT WILL OUR ENTIRE LIABILITY TO YOU EXCEED THE PURCHASE PRICE ACTUALLY PAID BY YOU FOR THE PRODUCTS, OR ANY DEFECTIVE OR NONCONFORMING PORTION
THEREOF, WHICHEVER IS THE LESSER AMOUNT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS AGREEMENT AND ANY CLAIMS AND DISPUTES BETWEEN THE PARTIES SHALL BE GOVERNED BY AND SUBJECT TO THE INTERNAL LAWS (EXCLUSIVE OF THE CONFLICTS OF LAW PROVISION)
AND DECISIONS OF THE COURTS OF THE STATE OF KANSAS. THE EXCLUSIVE VENUE AND JURISDICTION FOR ALL CLAIMS AND DISPUTES SHALL BE THE STATE OR FEDERAL COURT LOCATED IN
WICHITA, KANSAS.
Please write us or call us with any comments or questions:
For products purchased in the United States: The Coleman Company, Inc. at 3600 North Hydraulic, Wichita, KS 67219 U.S.A. 1-800-835-3278 or TDD 1-316-832-8707
For products purchased in Canada: Sunbeam Corporation (Canada) Limited, DBA Jarden Consumer Solutions at 20B Hereford Street, Brampton ON L6Y 0M1, 1-800-387-6161
The Coleman Company, Inc. neither assumes nor authorizes any representative or other person to assume any obligation or liability other than those expressly set forth herein.
© 2018 The Coleman Company, Inc. All rights reserved.
Made in China
www.aerobed.com 4010059376 (ECN20066104-04)
This furnishing has not been evaluated for flammability or cigarette ignition
resistance. See instructions for additional warnings.
This airbed can melt or burn. Keep away from open flames, heaters, and
other hot objects. Do not smoke on or near the airbed.
This airbed is not for use in water. It is not a life saving device, personal
flotation device, or water toy.
This airbed is not a toy. Do not stand, walk, jump or play on the
airbed. This can result in serious injury or damage to the airbed.
WARNING: Read airbed instruction manual and follow all safety instructions to avoid serious injury or death.
Risk of Suffocation
• Infantshavesuffocatedoninatablemattresses.Neverallow
a child under 3 years of age or persons with limited mobility
to sleep on an inflatable mattress.
• Childrencanbeentrappedbetweentheinatablemattress
and an adjacent vertical surface. Provide at least a shoulder
width space between the inflatable mattress and walls,
dressers or other vertical objects to avoid entrapment.
• Alwayskeeptheinatablemattressfullyinatedwheninuse.
Not suitable for
children under
3 years of age.
This manual suits for next models
1
Table of contents
Other AeroBed Indoor Furnishing manuals
Popular Indoor Furnishing manuals by other brands

Regency
Regency LWMS3015 Assembly instructions

Furniture of America
Furniture of America CM7751C Assembly instructions

Safavieh Furniture
Safavieh Furniture Estella CNS5731 manual

PLACES OF STYLE
PLACES OF STYLE Ovalfuss Assembly instruction

Trasman
Trasman 1138 Bo1 Assembly manual

Costway
Costway JV10856 manual