Aerofit IF9302 User manual

IF9302
CAUTION! Read all precautions and instructions in this manual
before using this equipment.
19V
Lat Pulldown
Owner's Manual

Table Of Contents
CAUTION!
Read all precautions and instructions in this manual before using this equipment.
Please assemble according to the actual Weights you buy !
Important Safety Instructions----------------------------------------------------------- 3
Instructions-------------------------------------------------------------------------------- 5
Exploded View and Parts List------------------------------------------------------------ 6
Measurement Guide--------------------------------------------------------------------- 13
Assembly Instructions------------------------------------------------------------------ 14
Assembly--------------------------------------------------------------------------------- 15
Adjust Instructions and Exercise Instructions---------------------------------------- 26
Maintenance Schedule------------------------------------------------------------------ 27
General Maintenance Information----------------------------------------------------- 28
Weight Training Tips-------------------------------------------------------------------- 29

3
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete physical
examination from your physician. When using exercise equipment, basic
precautions should always be taken, including the following:
1. Read all instructions before using the equipment.
These instructions are written to ensure your safety and to protect the unit.
2. Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the
manufacturer: such attachments might cause injuries.
3. The product should only be used on a level surface and is with 0.6 meters
space around the product.
Do not use the equipment outdoors.
4. Do not allow children on or near the equipment. And children are not allowed
to use this equipment.
Teenagers should use this equipment with adult supervision.
5. Do not overexert yourself or work to exhaustion.
Do not attempt to lift more weight than you can control safely.
If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
6. This equipment is not used as medical apparatus and instruments.
7. Never operate the unit when it has been dropped or damaged.
Never drop or insert anything into any opening in the equipment.
Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
Frayed or worn cables can be dangerous and may cause injury. Periodically
check these cables for any indication of wear.
Keep hands, limbs, loose clothing and long hair well out of the way of moving
parts.
8. Be careful when getting on or off the equipment.
9. Wear proper exercise clothing and shoes for your workout, no loose clothing.

Training Area and Free Area
4
Important Safety Instructions
Personal Safety During Assembly
Read each step in the assembly instructions and follow the steps in sequence.
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment.
Assemble and operate the equipment on a solid, level surface. Locate the unit
a few feet from walls or furniture to provide easy access. The equipment is
designed for your enjoyment. By following these precautions and using
common sense, you will have many safe and pleasurable hours of healthful
exercise with the equipment.
Specifications
Class: S
Maximum Wt. Capacity: 134kg/ 295lbs
Maximum User Weight: 150kg/ 330lbs
Product Dimension: 1318*1585*1891mm
Product Total Surface: 1318*1585mm
Product Total Mass: 100kg/ 221lbs

5
Instructions
Tools Required
The equipment is designed to provide the smoothest, most effective exercise
motion possible. After assembly, you should check all functions to ensure correct
operation. If you experience problems, first recheck the assembly instructions to
locate any possible errors made during assembly. If you are unable to correct the
problem, call your authorized dealer. Be sure to have your serial number and this
manual when calling. When all parts have been accounted for, continue on.
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set
Phillips Screwdriver
Before beginning assembly please take the time to read instructions thoroughly.
Please use the various lists in this manual to make sure that all parts have been
included in your shipment. When ordering, use part number and description from
the lists. Use only our replacement part when servicing. Failure to do so will void
your warranty and could result in personal injury.

6
Exploded View and Parts List
Overall
ItemNo. Grade No. Part No. Description QTY
1 1 IF931701ASSY Weight Stack Frame ASSY 1
2 2 IF930202ASSY Front Frame ASSY 1
3 3 IF93020300 Bottom Cross Frame 1
4 4 IF93020400 Rear Connection Frame 1
5 5 IF930205ASSY Support Frame ASSY 1
6 6 IF930206ASSY Arm Frame ASSY 1
7 7 IF930207ASSY Seat Pad Frame ASSY 1
8 8 IF930208ASSY FOAM Frame ASSY 1
9 9 IF93012100 Top Bracket 2
10 10 IF930122ASSY Bottom Bracket ASSY 1
11 11 IF93012600 Axis Φ25*133*M10 1
12 12 IF93013100 Training Placard Cover 1
13 13 IF93013200 Top Cover 1
14 14 IF93013300 Right Plug 1
15 15 IF93013400 Left Plug 1
16 16 IF93015200 Seat Pad 1
17 17 IF81023500V4 FOAM ASSY 2
18 18 IF93015600 Cable ASSY 1
19 19 IT95014200 Top Plate 1
20 20 IT95014400 Guide Rod Φ19*1242 2
21 21 IT95015500 Top Rear Shroud 1
22 22 IT95015600 Rear Shroud 1
23 23 IT95016400 Pulley Cover 3
24 24 IT80033800B Half Pulley Cover 4
25 25 SG500110400V5 4.5" Pulley（Spacer）5
26 26 IT95057800 4.5" Pulley 1
27 27 IT90012000V1 Selector Pin W/Coil 1
28 28 IT80023000 Weight Ru bber Bumper 2
29 29 HF1652100 Plastic Washer 4
30 30 IF81022000PBC Foam Cap 2
31 31 IT95016100 Guide Rod Fixing SleeveΦ25*Φ19*45 2
32 32 FE97211900 Cap Φ60 2
33 33 FE97212000 Circle Ring Φ62.5*5 2
34 34 HFOPT900-04A0602 Sprin g Φ15.5*Φ1.5*36 2
35 35 IT80124103 Spring Pin Φ11*76 1
36 36 FE97122100 Pulley Spacer 1 1
37 37 GB5780M12*105DS20 Hex Head Bolt M12*105 1
38 38 GB5780M10*130DS20 Hex Head Bolt M10*130 2
39 39 GB5780M10*120DS20 Hex Head Bolt M10*120 4
40 40 GB5780M10*75DS20 Hex Head Bolt M10*75 8
41 41 GB5780M10*50DS20 Hex Head Bolt M10*50 2
42 42 GB5780M10*30DS20 Hex Head Bolt M10*30 5
43 43 GB70M10*50DS20 Socket Head Cap Screw M10*50 3
44 44 GB70M10*25DS20NL Socket Head Cap Screw M10*25 2
45 45 GB70M10*20DS20NL Socket Head Cap Screw M10*20 1
46 46 PNLM10*30*30DS20 Bu tton Head Cap Screw M10*30 2
47 47 GB818M6*20*20N19 Cross Recessed Pan H ead Screw M6*20 18
48 48 GB818M6*10N19 Cross Recessed Pan Head Screw M6*10 4
49 49 GB9310DS12 Sprin g Washer Φ10 3
50 50 DQ10N19B Flat Washer Φ11*Φ25*2 1
51 51 GB9512DS2 Flat Washer Φ13*Φ24*2.5 2
52 52 GB9510DS2 Flat Washer Φ11*Φ20*2 39
53 53 NM12DS2 Nylon Lock Nut M12 1
54 54 NM10DS2 Nylon Lock Nut M10 19
55 55 NBS6DHS Hex Key S=6 1
56 56 NBS8DHS Hex Key S=8 1
57 57 LW200BS Wrench Φ6*117 1
58 58 YHY Lube 1
59 99 IF93062200 Washer Φ62*Φ10.5*3 2

7
Exploded View and Parts List
Overall

8
Exploded View and Parts List
Weight Stack Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 1.1 IF93170100 Weight Stack Frame 1
2 1.2 BS81223100 Foot Plate 2
3 1.3 GB17880.5M6*16.5DS17 Rivet Nut M6 12
4 1.4 AC32705800 U-nut M6 4

9
Exploded View and Parts List
Front Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 2.1 IF93020200 Front Frame 1
2 2.2 IF930127ASSY Cable Connector ASSY 1
3 2.3 IT90021100V1 Lining Board 1
4 2.4 IF81105500V1 Fixed BoltΦ9.4*47.5*M8 1
5 2.5 RS17000400 Urethane Bumper 2
6 2.6 BS81223100 Foot Plate 2
7 2.7 IN-S10111200 Rubber Sleeve Φ17*10.5 2
8 2.8 GB70M8*20DS20 Socket Head Cap Screw M8*20 2
9 2.9 GB9510DS2 Flat Washer Φ11*Φ20*2 2
10 2.10 GB958DS2 Flat Washer Φ9*Φ16*1.6 2
11 2.11 NM8DS2 Nylon Lock Nut M8 3
12 2.12 GB70M10*20DS20 Socket Head Cap Screw M10*20 4

10
Exploded View and Parts List
Arm Frame ASSY
Support Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 5.1 IF93020500 Support Frame 1
2 5.2 VLP8000 Plug □50*100 1
3 5.3 GB2766205-2ZC3 Deep Groove Ball Bearing Φ25*Φ52*15 2
ItemNo. Grade No. Part No. Description QTY
1 6.1 IF93020600 Arm Frame 1
2 6.2 B10009900 Plug Φ50.8 2
3 6.3 IT95032100 Grip STΦ30*Φ22*350 2
4 6.4 V39500 Aluminum Grip Ring Φ25.4 2
5 6.5 V39600 Aluminum Grip Cap Φ25.4 2
6 6.6 YZGB7710-32*3.2N19 Socket Set Screw 10-32UNF*3.2 8

11
Exploded View and Parts List
Seat Pad Frame ASSY Cable Connector ASSY
ItemNo. Grade No. Part No. Description QTY
1 7.1 IF93020700 Seat Pad Frame 1
2 7.2 BS81223100 Foot Plate 1
ItemNo. Grade No. Part No. Description QTY
1 2.2.1 IF93012700 Cable Connector 1
2 2.2.2 BNH0738 Bush Φ18*Φ12.7*Φ9.5*9.5 2

12
Exploded View and Parts List
FOAM Frame ASSY Bottom Bracket ASSY
ItemNo. Grade No. Part No. Description QTY
1 8.1 IF93020800 FOAM Frame 1
2 8.2 IT95021600 Pin 1
3 8.3 M02502000 Spacer Φ38*Φ32*Φ25.4*18 2
4 8.4 IF81165000 Lock Nut 25*2.5*21.6 2
5 8.5 IT90021200V1 Axis Φ25.4*Φ12.5*72.5 1
ItemNo. Grade No. Part No. Description QTY
1 10.1 IF93012200 Bottom Bracket 1
2 10.2 GB17880.5M6*16.5DS17 Rivet Nut M6 2

Inches
Millimeters
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
FHCS = Flat Head Cap Screw
HHB = Hex Head Bolt
Measurement Guide
Diameter of bolt
(mm/inch) M6(1/4") M8(5/16") M10(3/8") M12(1/2") M16(5/8")
Tightening
torque (N.m) 9~12 22~30 45~59 78~104 193~257
Operational
methods for
adult men
The strength of
the wrist
The strength of
the wrist and
forearm
The strength of
the entire arm
The strength of
the arm and
upper body
with all strength
13
CRPHS = Cross Recessed Pan
Head Screw

14
Assembly Instructions
Assembly of the equipment takes professional installers about 2 hours. If this
is the first time you have assembled this type of equipment, plan to spend
more time. It is strongly recommended to assemble the equipment by
professional installers. You may find it quicker, safer, easier to assemble this
equipment with the help of a friend, as some of components may be large,
heavy or awkward to handle alone. It is important that you assemble your
product in a clean, clear, uncluttered area. This will enable you to move around
the product while you are fitting components and reduce the possibility of
injury during assembly.
As with any assembled part, proper alignment and adjustment is critical. While
tightening the fasteners, be sure to leave room for adjustments. Do not fully
tighten the fasteners until instructed to do so. Be careful to assemble the
components in the sequence presented in this guide.
NOTE

STEP 1
1. Attach the Bottom Cross Frame (#3) and the Rear Connection Frame (#4) to the Weight
Stack Frame ASSY (#1) using:
two M10*75 HHB (#40) two M10*30 HHB (#42)
six Φ11*Φ20*2 Flat Washer (#52) two Φ10 Spring Washer (#49)
two M10 Nylon Lock Nut (#54)
2. Attach the Front Frame ASSY (#2) to the Bottom Cross Frame (#3) and the Rear
Connection Frame (#4) using:
four M10*120 HHB (#39) eight Φ11*Φ20*2 Flat Washer (#52)
four M10 Nylon Lock Nut (#54)
Note: Wrench Tighten Bolts and Nylon Lock Nuts.
Assembly
15

Assembly
16
STEP 2
1. Attach the Seat Pad Frame ASSY (#7) to the Front Frame ASSY (#2) using:
four M10*75 HHB (#40) eight Φ11*Φ20*2 Flat Washer (#52)
four M10 Nylon Lock Nut (#54)
2. Attach the FOAM Frame ASSY (#8) to the Front Frame ASSY (#2) using:
one M12*105 HHB (#37) two Φ13*Φ24*2.5 Flat Washer (#51)
one M12 Nylon Lock Nut (#53)
3. Attach the Support Frame ASSY (#5) to the Front Frame ASSY (#2) using:
one Φ25*133*M10 Axis (#11) two Φ62.5*5 Circle Ring (#33)
two Φ60 Cap (#32) two M10*25 SHCS (#44)
two Φ62*Φ10.5*3 Washer (#99)
4. Attach the Arm Frame ASSY (#6) to the Support Frame ASSY (#5) using:
one M10*30 HHB (#42) two M10*130 HHB (#38)
five Φ11*Φ20*2 Flat Washer (#52) one Φ10 Spring Washer (#49)
two M10 Nylon Lock Nut (#54)
Note: Wrench Tighten Bolts and Nylon Lock Nuts.

STEP 3
TIPS: Firstly, attach one end of the Cable ASSY (#18) to the Front Frame ASSY (#2).
Before attach the 4.5" Pulley to the frame, you should lead the other end of the Cable
ASSY (#18) across it.
1. Attach one 4.5" Pulley (Spacer) (#25), one 4.5" Pulley (#26) and one Pulley Cover
(#23), two Half Pulley Cover (#24) to the Front Frame ASSY (#2) using:
one M10*50 SHCS (#43) one M10*20 SHCS (#45)
one Pulley Spacer 1 (#36) one Φ11*Φ25*2 Flat Washer (#50)
one M10 Nylon Lock Nut (#54)
2. Attach one 4.5" Pulley(Spacer) (#25) to the Support Frame ASSY (#5) using:
one M10*50 SHCS (#43) two Half Pulley Cover (#24)
one M10 Nylon Lock Nut (#54)
3. Attach three 4.5" Pulley (Spacer) (#25) and two Pulley Cover (#23) to the Weight Stack
Frame ASSY (#1) using:
two M10*50 HHB (#41) one M10*50 SHCS (#43)
four Φ11*Φ20*2 Flat Washer (#52) three M10 Nylon Lock Nut (#54)
Note: Wrench Tighten Bolts and Nylon Lock Nuts.
Assembly
17

18
Assembly
Select STEP
If you install the Front Shroud Attachment (IF93SH01) later, you should to finish the
following step firstly.
1. Attach eight Plastic Nut to the Weight Stack Frame ASSY (#1).
2. Attach the Front Bracket ASSY, Right Bracket ASSY and the Left Bracket ASSY to the
Weight Stack Frame ASSY (#1) using:
eight ST4.2*16 Cross Disc Self Tapping Screw

STEP 4
1. Attach:
two Guide Rod Φ19*1242 (#20) two Weight Rubber Bumper (#28)
fifteen Weight Plate 10LBS (#101) two weight stack space (#103)
one Top Plate (#19)
to the Weight Stack Frame ASSY (#1) using:
two Guide Rod Fixing Sleeve Φ25*Φ19*45 (#31)
two Spring (#34)
2. Attach the Selector Pin W/Coil (#27) to the Top Plate (#19).
3. Attach the Second Weight Plate 10LBS(#101) to the Top Plate (#19) using:
one Spring Pin Φ11*76 (#35)
4. Attach the Cable ASSY (#18) to the Top Plate (#19).
Assembly
19
Here is the assembly instruction for 160LBS Weights !
Grade No. Part No. Description QTY
101 FE97193100 10LBS Weight Plate 15
103 FEWS01ASSY Weight Stack Space 2

Assembly
20
Here is the assembly instruction for 200LBS Weights !
Grade No. Part No. Description QTY
101 FE97193100 10LBS Weight Plate 19
STEP 4
1. Attach:
two Guide Rod Φ19*1242 (#20) two Weight Rubber Bumper (#28)
nineteen Weight Plate 10LBS (#101) one Top Plate (#19)
to the Weight Stack Frame ASSY (#1) using:
two Guide Rod Fixing Sleeve Φ25*Φ19*45 (#31)
two Spring (#34)
2. Attach the Selector Pin W/Coil (#27) to the Top Plate (#19).
3. Attach the Second Weight Plate 10LBS(#101) to the Top Plate (#19) using:
one Spring Pin Φ11*76 (#35)
4. Attach the Cable ASSY (#18) to the Top Plate (#19).