Aerofit SL7042 User manual

CAUTION! Read all precautions and instructions in this manual
before using this equipment.
19W
SL7042
MAGIC RACK/SMITH MACHINE
Owner's Manual

Table Of Contents
CAUTION!
Read all precautions and instructions in this manual before using this equipment.
Important Safety Instructions----------------------------------------------------------- 3
Instructions-------------------------------------------------------------------------------- 5
Exploded View and Parts List------------------------------------------------------------ 6
Measurement Guide--------------------------------------------------------------------- 17
Assembly Instructions------------------------------------------------------------------ 18
Assembly--------------------------------------------------------------------------------- 19
Adjust Instructions and Exercise Instructions---------------------------------------- 25
Maintenance Schedule------------------------------------------------------------------ 26
General Maintenance Information----------------------------------------------------- 27
Weight Training Tips-------------------------------------------------------------------- 28

3
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete physical
examination from your physician. When using exercise equipment, basic
precautions should always be taken, including the following:
1. Read all instructions before using the equipment.
These instructions are written to ensure your safety and to protect the unit.
2. Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the
manufacturer: such attachments might cause injuries.
3. The product should only be used on a level surface and is with 0.5 meters
space around the product.
Do not use the equipment outdoors.
4. Do not allow children on or near the equipment. And children are not allowed
to use this equipment.
Teenagers should use this equipment with adult supervision.
5. Do not overexert yourself or work to exhaustion.
Do not attempt to lift more weight than you can control safely.
If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
6. This equipment is not used as medical apparatus and instruments.
7. Never operate the unit when it has been dropped or damaged.
Never drop or insert anything into any opening in the equipment.
Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
Frayed or worn cables can be dangerous and may cause injury. Periodically
check these cables for any indication of wear.
Keep hands, limbs, loose clothing and long hair well out of the way of moving
parts.
8. Be careful when getting on or off the equipment.
9. Wear proper exercise clothing and shoes for your workout, no loose clothing.

Specifications
Class: S
Maximum Wt. Capacity: 300kg/ 660lbs
Maximum User Weight: 150kg/ 330lbs
Product Dimension: 2314*2273*2386mm
Product Total Surface: 2314*2273mm
Product Total Mass:
Training Area and Free Area
4
Important Safety Instructions
Personal Safety During Assembly
Read each step in the assembly instructions and follow the steps in sequence.
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment.
Assemble and operate the equipment on a solid, level surface. Locate the unit
a few feet from walls or furniture to provide easy access. The equipment is
designed for your enjoyment. By following these precautions and using
common sense, you will have many safe and pleasurable hours of healthful
exercise with the equipment.

5
Instructions
Tools Required
The equipment is designed to provide the smoothest, most effective exercise
motion possible. After assembly, you should check all functions to ensure correct
operation. If you experience problems, first recheck the assembly instructions to
locate any possible errors made during assembly. If you are unable to correct the
problem, call your authorized dealer. Be sure to have your serial number and this
manual when calling. When all parts have been accounted for, continue on.
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set
Phillips Screwdriver
Before beginning assembly please take the time to read instructions thoroughly.
Please use the various lists in this manual to make sure that all parts have been
included in your shipment. When ordering, use part number and description from
the lists. Use only our replacement part when servicing. Failure to do so will void
your warranty and could result in personal injury.

6
Exploded View and Parts List
The Left Frame ASSY
Weight Storage ASSY
The Right Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 1.1 SL70420100 The Left Frame 1
2 1.2 CWRVL0051200 Rubber Foot 1
3 1.3 GB77M8*10DHS4 Screw M8*10 1
ItemNo. Grade No. Part No. Description QTY
1 2.1 SL70420200 The Right Frame 1
2 2.2 CWRVL0051200 Rubber Foot 1
3 2.3 GB77M8*10DHS4 Screw M8*10 1
ItemNo. Grade No. Part No. Description QTY
1 3.1 SL70100300 Weight Storage 1
2 3.2 HF985A1500 Weight Horn Rubber Donut Φ76*Φ42*25 1
3 3.3 SL70100400 Plastic Pipe Φ49*Φ41.4*223 1
4 3.4 RF-6012500 Round End Plug Φ41.3*Φ34 1

7
Exploded View and Parts List
The Left Floor Stand Frame
ASSY On The Back
The Left Floor Stand
Frame ASSY
The Right Floor Stand Frame
ASSY On The Back
The Right Floor Stand
Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 11.1 SL70421100 The Left Floor Stand Frame 1
2 11.2 PBF30013 End Plug □75 1
ItemNo. Grade No. Part No. Description QTY
1 12.1 SL70421200 The Right Floor Stand Frame 1
2 12.2 PBF30013 End Plug □75 1
ItemNo. Grade No. Part No. Description QTY
1 5.1 SL70420500 The Left Floor Stand Frame 1
2 5.2 KPSFID2800 End Plug □50 1
ItemNo. Grade No. Part No. Description QTY
1 6.1 SL70420600 The Right Floor Stand Frame 1
2 6.2 KPSFID2800 End Plug □50 1
11
11
12
12
5
5
6
6

8
Exploded View and Parts List
Floor Stand Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 13.1 SL70421300 Floor Stand Frame 1
2 13.2 GB17880.5M8*16.5DCS17 Rivet Nut M8*16.5 1
ItemNo. Grade No. Part No. Description QTY
1 41.1 IT7001B1700 Counter Weight 1
2 41.2 014-0012024 Bearing Assembly 12
3 41.3 GB894.18FH12 External Circlip 12
4 41.4 ROC-IT1012400 Crash Pad 1
Counter Weight

9
Exploded View and Parts List
Olympic Bar ASSY
ItemNo. Grade No. Part No. Description QTY
1 18.1 IT70010400ASSY The First Step Of Olympic Bar ASSY 1
2 18.2 IT70010500ASSY Left Bar Support ASSY 1
3 18.3 IT70010600ASSY Right Bar Support ASSY 1
4 18.4 CF37532600 Grip Cap 2
5 18.5 PNLM10*25DN20NL Button Head Cap ScrewM10*25 2
6 18.6 GB9510DN2 Flat Washer Φ11*Φ20*2 2

10
Exploded View and Parts List
The First Step Of Olympic Bar ASSY
ItemNo. Grade No. Part No. Description QTY
1 18.1.1 IT70010400V1 The First Step Of Olympic Bar 1
2 18.1.2 IT70011800 spindle 2
3 18.1.3 NKI35/20 needle bearing 2
4 18.1.4 GB9510DN2 Flat Washer Φ11*Φ20*2 4
5 18.1.5 NM10DN2 Nylon Lock Nut M10 2
6 18.1.6 GB894.135FH12 circlip for shaft Φ35 4
7 18.1.7 GB70BTM10*55DN18 Thin Socket Head Cap Screw M10*55 2

11
Exploded View and Parts List
Left Bar Support ASSY Right Bar Support ASSY
ItemNo. Grade No. Part No. Description QTY
1 18.2.1 IT70010500V1 Left Bar Support 1
2 18.2.2 IT7001TM0100 Wheel 1
3 18.2.3 CF37533400 Weight Horn Rubber Donut 1
4 18.2.4 WONSBE30 Φ30mm Linear Bearing 2
5 18.2.5 GB9510DN2 Flat Washer Φ11*Φ20*2 2
6 18.2.6 NM10DN2 Nylon Lock Nut M10 1
7 18.2.7 GB70BTM10*60DN18 Thin Socket Head Cap Screw M10*60 1
8 18.2.8 GB893.147FH12 circlip for hole Φ47 2
9 18.2.9 NA4905 Bearing:25mm Needle Bearing 1
ItemNo. Grade No. Part No. Description QTY
1 18.3.1 IT70010600V1 Right Bar Support 1
2 18.3.2 IT7001TM0100 Wheel 1
3 18.3.3 CF37533400 Weight Horn Rubber Donut 1
4 18.3.4 NA4905 Bearing:25mm Needle Bearing 1
5 18.3.5 NM10DN2 Nylon Lock Nut M10 1
6 18.3.6 GB9510DN2 Flat Washer Φ11*Φ20*2 2
7 18.3.7 WONSBE30 Φ30mm Linear Bearing 2
8 18.3.8 GB70BTM10*60DN18 Thin Socket Head Cap Screw M10*60 1
8 18.3.9 GB893.147FH12 circlip for hole Φ47 2

12
Exploded View and Parts List
Carrage 1 Carrage 2
ItemNo. Grade No. Part No. Description QTY
1 15.1 SL70140600 Carriage 1 1
2 15.2 CHFPR2000 Plastic Plat 2 1
3 15.3 CHFPR1900 Plastic Plat 1 1
4 15.4 CHHPR1600 Long Plastic Plat 1
5 15.5 IF81162400P129C Plastic Kbon-Base 1
6 15.6 IF81162300P129C Plastic Kbon-Cap 1
7 15.7 GB819M6*12DHS2 Flat Head Cap ScrewM6*12 1
8 15.8 CNLM10*20N19 Flat Head Cap ScrewM10*20 11
ItemNo. Grade No. Part No. Description QTY
1 16.1 SL70140800 Carriage 2 1
2 16.2 CHHPR1600 Long Plastic Plat 1
3 16.3 CHFPR1900 Plastic Plat 1 1
4 16.4 CHFPR2000 Plastic Plat 2 1
5 16.5 IF81162400P129C Plastic Kbon-Base 1
6 16.6 IF81162300P129C Plastic Kbon-Cap 1
7 16.7 CNLM10*20N19 Flat Head Cap ScrewM10*20 1
8 16.8 GB819M6*12DHS2 Flat Head Cap ScrewM6*12 11

13
Exploded View and Parts List
Lat Bar ASSY Safety Catch,Guide
ItemNo. Grade No. Part No. Description QTY
1 40.1 SL70411500 Lat Bar 1
2 40.2 IF81212700 sun helmet 2
3 40.3 IT9030B9500 Aluminum shell cove 2
4 40.4 CNLM10*40N19NL Flat Head Cap ScrewM10*40 2
ItemNo. Grade No. Part No. Description QTY
1 19.1 CF37538500 Nylon Bushing 2
2 19.2 HF985A1800 Bushing 2
3 19.3 IT70010900 Safety Catch,Guide 1

14
Exploded View and Parts List
Right Safety Catch
Left Safety Catch
The Battery Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 20.1 CG50001700 Grip 1
2 20.2 IT70011100V1 Right Safety Catch 1
ItemNo. Grade No. Part No. Description QTY
1 21.1 CG50001700 Grip 1
2 21.2 IT70011200V1 Left Safety Catch 2
ItemNo. Grade No. Part No. Description QTY
1 43.1 IZ70120100 fixed mount 1
2 43.2 IZ70120200 turret 1
3 43.3 IZ70120300 Battery holder 1
4 43.4 IZ70120400 spindle 2
5 43.5 M02502000 copper lead bearing 4
6 43.6 DQ10DHS2D Flat Washer Φ11*Φ20*2 4
7 43.7 GB5780M10*30DHS20 hexagonal head boltM10*30 4
8 43.8 GB9310DHS12 spring washer M10 4
9 43.9 PBD30201Y rotary knob 1

15
Exploded View and Parts List
Overall
Item No. Grade No. Part No. Description QTY
1 1 SL704201ASSY The Left Floor Stand Frame ASSY 1
2 2 SL704202ASSY The Right Floor Stand Frame ASSY 1
3 3 SL70420300 The Bottom Connection Frame 1
4 4 SL70420400 The Short Connection Frame 1
5 5 SL704205ASSY The Left Floor Stand Frame ASSY 1
6 6 SL704206ASSY The Right Floor Stand Frame ASSY 1
7 7 SL70420700 The Right Connection Frame 1
8 8 SL70420800 The Left Connection Frame 1
9 9 SL70420900 The Long Connection Frame 1
10 10 SL70421000 Guide Rod Housing 2
11 11 SL704211ASSY The Left Floor Stand Frame ASSY On The Back 1
12 12 SL704212ASSY The Right Floor Stand Frame ASSY On The Back 2
13 13 SL704213ASSY Floor Stand Frame ASSY 2
14 14 SL70421400 Cable Assembly 2
15 15 SL701406ASSY Carrage 1 1
16 16 SL701408ASSY Carrage 2 1
17 17 SL701003ASSY Cable Assembly 8
18 18 IT700104ASSY Olympic Bar ASSY 1
19 19 IT700109ASSY Safety Catch,Guide 2
20 20 IT700111ASSY Right Safety Catch 1
21 21 IT700112ASSY Left Safety Catch 1
22 22 SL70421500 Toothed Plate 2
23 23 SL70421600 Guide rod 2
24 24 GB938DHS12 spring washer 2
25 25 GB9510DHS2 Flat Washer Φ11*Φ20*2 22
26 26 GB70M10*25DHS20 Socket Head Cap ScrewM10*25 18
27 27 GB70M12*100DHS20 Socket Head Cap ScrewM12*100 18
28 28 DQ12DHS2A Flat Washer Φ13*Φ24*2.5 112
29 29 NM12DHS2 Nylon Lock Nut M12 44
30 30 GB70M12*105DHS20 Socket Head Cap ScrewM12*105 10
31 31 GB70M12*35*35DHS20NL Soc ket Head Cap ScrewM12*35 12
32 32 GB70M12*75DHS20 Socket Head Cap ScrewM12*75 16
33 33 GB70M12*135DHS20 Socket Head Cap ScrewM12*135 4
34 34 GB70M12*40DHS20 Socket Head Cap ScrewM12*40 2
35 35 GB70M12*20DHS20NL Socket Head Cap ScrewM12*20 4
36 36 GB70M10*50DHS20 Socket Head Cap ScrewM10*50 2
37 37 SG500110400V5 Large pulley 2
38 38 IT95274400 column 2
39 39 IT70011400V1 Rack Out Plate 2
40 40 SE500107ASSY Lat Bar 1
41 41 IT7001B1700ASSY Counter Weight 2
42 42 IT7001B1500 Crash Pad 2
43 43 SL704220ASSY The Battery Frame ASSY 1
44 44 NM10DHS2 Nylon Lock Nut M10 2
45 45 NBS12DHS Hex Key S=12 1
46 46 NBS10DHS Hex Key S=10 1

16
Exploded View and Parts List
Overall

Inches
Millimeters
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
FHCS = Flat Head Cap Screw
HHB = Hex Head Bolt
Measurement Guide
Diameter of bolt
(mm/inch) M6(1/4") M8(5/16") M10(3/8") M12(1/2") M16(5/8")
Tightening
torque (N.m) 9~12 22~30 45~59 78~104 193~257
Operational
methods for
adult men
The strength of
the wrist
The strength of
the wrist and
forearm
The strength of
the entire arm
The strength of
the arm and
upper body
with all strength
17

18
Assembly Instructions
Assembly of the equipment takes professional installers about 2 hours. If this
is the first time you have assembled this type of equipment, plan to spend
more time. It is strongly recommended to assemble the equipment by
professional installers. You may find it quicker, safer, easier to assemble this
equipment with the help of a friend, as some of components may be large,
heavy or awkward to handle alone. It is important that you assemble your
product in a clean, clear, uncluttered area. This will enable you to move around
the product while you are fitting components and reduce the possibility of
injury during assembly.
As with any assembled part, proper alignment and adjustment is critical. While
tightening the fasteners, be sure to leave room for adjustments. Do not fully
tighten the fasteners until instructed to do so. Be careful to assemble the
components in the sequence presented in this guide.
NOTE

STEP 1
1. Attach The Left Floor Stand Frame ASSY (#1) to The Bottom Connection Frame (#3),
Attach The Right Floor Stand Frame ASSY (#2) to The Bottom Connection Frame (#3),
using:
four M12*135 SHCS (#33) eight Φ13*Φ24*2.5 Flat Washer (#28)
four M12 Nylon Lock Nut (#29)
2. Attach The Left Floor Stand Frame ASSY (#5) to The Left Floor Stand Frame ASSY (#1),
Attach The Right Floor Stand Frame ASSY (#6) to The Right Floor Stand Frame ASSY
(#2), using:
four M12*35 SHCS (#31) four Φ13*Φ24*2.5 Flat Washer (#28)
3. Attach one Floor Stand Frame ASSY (#13) to The Left Floor Stand Frame ASSY (#1),
Attach The Other one Floor Stand Frame ASSY (#13) to The Right Floor Stand Frame
ASSY (#2), using:
four M12*35 SHCS (#31) four Φ13*Φ24*2.5 Flat Washer (#28)
4. Attach The Left Floor Stand Frame ASSY On The Back (#11) to The Left Floor Stand
Frame ASSY (#1), Attach The Right Floor Stand Frame ASSY On The Back (#12) to The
Right Floor Stand Frame ASSY (#2), using:
four M12*35 SHCS (#31) four Φ13*Φ24*2.5 Flat Washer (#28)
5. Attach The Right Connection Frame (#7) to The Right Floor Stand Frame ASSY (#6),
The Right Floor Stand Frame ASSY On The Back(#12), Floor Stand Frame ASSY (#13),
using:
four M12*105 SHCS (#30) two M12*20 SHCS (#35)
ten Φ13*Φ24*2.5 Flat Washer (#28) four M12 Nylon Lock Nut (#29)
6. Attach The Left Connection Frame (#8) to The Left Floor Stand Frame ASSY (#5), The
Left Floor Stand Frame ASSY On The Back (#11), Floor Stand Frame ASSY (#13), using:
four M12*105 SHCS (#30) two M12*20 SHCS (#35)
ten Φ13*Φ24*2.5 Flat Washer (#28) four M12 Nylon Lock Nut (#29)
7. Attach The Short Connection Frame (#4) to The Left Floor Stand Frame ASSY On The
Back (#11), The Right Floor Stand Frame ASSY On The Back (#12), using:
four M12*100 SHCS (#27) six Φ13*Φ24*2.5 Flat Washer (#28)
two M12 Nylon Lock Nut (#29)
8. Attach The Lat Bar (#40) to The Short Connection Frame (#4) using:
four M12*100 SHCS (#27) two M12*105 SHCS (#30)
six Φ13*Φ24*2.5 Flat Washer (#28) two M12 Nylon Lock Nut (#29)
Note: NOT Tighten Bolts and Nylon Lock Nuts.
Assembly
19

STEP 1
Assembly
20