Aerofit Pectoral IF9304 User manual

IF9304
CAUTION! Read all precautions and instructions in this manual
before using this equipment.
19V
Pectoral
Owner's Manual

Table Of Contents
CAUTION!
Read all precautions and instructions in this manual before using this equipment.
Please assemble according to the actual Weights you buy !
Important Safety Instructions----------------------------------------------------------- 3
Instructions-------------------------------------------------------------------------------- 5
Exploded View and Parts List------------------------------------------------------------ 6
Measurement Guide--------------------------------------------------------------------- 16
Assembly Instructions------------------------------------------------------------------ 17
Assembly--------------------------------------------------------------------------------- 18
Adjust Instructions and Exercise Instructions---------------------------------------- 30
Maintenance Schedule------------------------------------------------------------------ 31
General Maintenance Information----------------------------------------------------- 32
Weight Training Tips-------------------------------------------------------------------- 33

3
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete physical
examination from your physician. When using exercise equipment, basic
precautions should always be taken, including the following:
1. Read all instructions before using the equipment.
These instructions are written to ensure your safety and to protect the unit.
2. Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the
manufacturer: such attachments might cause injuries.
3. The product should only be used on a level surface and is with 0.6 meters
space around the product.
Do not use the equipment outdoors.
4. Do not allow children on or near the equipment. And children are not allowed
to use this equipment.
Teenagers should use this equipment with adult supervision.
5. Do not overexert yourself or work to exhaustion.
Do not attempt to lift more weight than you can control safely.
If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
6. This equipment is not used as medical apparatus and instruments.
7. Never operate the unit when it has been dropped or damaged.
Never drop or insert anything into any opening in the equipment.
Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
Frayed or worn cables can be dangerous and may cause injury. Periodically
check these cables for any indication of wear.
Keep hands, limbs, loose clothing and long hair well out of the way of moving
parts.
8. Be careful when getting on or off the equipment.
9. Wear proper exercise clothing and shoes for your workout, no loose clothing.

Specifications
Class: S
Maximum Wt. Capacity: 134kg/ 295lbs
Maximum User Weight: 150kg/ 330lbs
Product Dimension: 806*1736*1530mm
Product Total Surface: 1017*1736mm
Product Total Mass: 105.5kg/ 233lbs
Training Area and Free Area
4
Important Safety Instructions
Personal Safety During Assembly
Read each step in the assembly instructions and follow the steps in sequence.
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment.
Assemble and operate the equipment on a solid, level surface. Locate the unit
a few feet from walls or furniture to provide easy access. The equipment is
designed for your enjoyment. By following these precautions and using
common sense, you will have many safe and pleasurable hours of healthful
exercise with the equipment.

5
Instructions
Tools Required
The equipment is designed to provide the smoothest, most effective exercise
motion possible. After assembly, you should check all functions to ensure correct
operation. If you experience problems, first recheck the assembly instructions to
locate any possible errors made during assembly. If you are unable to correct the
problem, call your authorized dealer. Be sure to have your serial number and this
manual when calling. When all parts have been accounted for, continue on.
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set
Phillips Screwdriver
Before beginning assembly please take the time to read instructions thoroughly.
Please use the various lists in this manual to make sure that all parts have been
included in your shipment. When ordering, use part number and description from
the lists. Use only our replacement part when servicing. Failure to do so will void
your warranty and could result in personal injury.

6
Exploded View and Parts List
Overall
ItemNo. Grade No. Part No. Description QTY
1 1 IF930101ASSY Weight Stack Frame ASSY 1
2 2 IF930402ASSY Main Frame ASSY 1
3 3 IF930403ASSY Bottom Cross Brace ASSY 1
4 4 IF930404ASSY Back Cross Frame ASSY 1
5 5 IF930405ASSY Right Arm Frame ASSY 1
6 6 IF930406ASSY Left Arm Frame ASSY 1
7 7 IF930407ASSY Right Cross Frame ASSY 1
8 8 IF930408ASSY Left Cross Frame ASSY 1
9 9 IF93040900 Top Cross Frame 1
10 10 IF930410ASSY Cam Frame Assy 1
11 11 IF930411ASSY Seat Pad Frame ASSY 1
12 12 IF93042100 Protective plate 1
13 13 IF93045600 Cable ASSY 1
14 14 IF93045700 Cable ASSY 2
15 15 IT95120900 Seat Pad Support 1
16 16 IF93012100 Top Bracket 2
17 17 IF930122ASSY Bottom Bracket ASSY 1
18 18 IF93013200 Top Cover 1
19 19 IF93013300 Right Plug 1
20 20 IF93013400 Left Plug 1
21 21 IF93013100 Training Placard Cover 1
22 22 IT95015500 Top Rear Shroud 1
23 23 IT95014200 Top Plate 1
24 24 IT95014400 Guide Rod Φ19*1242 2
25 25 SG500110400V5 4.5" Pulley（Spacer）3
26 26 IT95057800 4.5" Pulley 2
27 27 IT95016400 Pulley Cover 4
28 28 IT80023000 Weight Rubber Bumper 2
29 29 IT90012000V1 Selector Pin W/Coil 1
30 30 IT95016100 Guide Rod Fixing SleeveΦ30*Φ19*45 2

7
Exploded View and Parts List
Overall
ItemNo. Grade No. Part No. Description QTY
31 31 HFOPT900-04A0602 Spring 2
32 32 FE97122100 Pulley Spacer 1 2
33 33 FE97212000 Circle Ring Φ62.5*5 2
34 34 FE97211900 Cap Φ60.1*16.1 2
35 35 GB5780M10*120DS20 Hex Head Bolt M10*120 4
36 36 GB5780M10*75DS20 Hex Head Bolt M10*75 4
37 37 GB5780M10*30DS20 Hex Head Bolt M10*30 10
38 38 GB5780M10*70DS20 Hex Head Bolt M10*70 2
39 39 GB5781M10*15DS20NL Hex Head Bolt(Nylok) M10*15 2
40 40 GB70M10*20DS20NL Socket Head Cap Screw(Nylok) M10*20 2
41 41 GB70M10*50DS20NL Socket Head Cap Screw(Nylok) M10*50 1
42 42 GB70M10*25DS20NL Socket Head Cap Screw(Nylok) M10*25 2
43 43 GB5780M10*50DS20 Hex Head Bolt M10*50 2
44 44 GB5780M10*60DS20 Hex Head Bolt M10*60 2
45 45 GB5780M10*130DS20 Hex Head Bolt M10*130 2
46 46 GB41M10DS2 Hex Nut M10 2
47 47 GB818M6*20*20N19 Cross Recessed Pan Head Screw M6*20 18
48 48 GB818M6*10N19 Cross Recessed Pan Head Screw M6*10 4
49 49 DQ10N19B Flat Washer Φ11*Φ25*2 2
50 50 GB9510DS2 Flat Washer Φ11*Φ20*2 39
51 51 GB9310DS12 Spring Washer Φ10 8
52 52 NM10DS2 Nylon Lock Nut M10 14
53 53 IT80083500 Washer Φ32*Φ26*5 1
54 54 LW200BS Wrench Φ6*117 1
55 55 NBS8DHS Hex Key S=8 1
56 56 YHY Lube 1
57 57 IT95015600 Rear Shroud 1
58 58 IF93015100 Back Pad 1
59 59 IF93015200 Seat Pad 1

8
Exploded View and Parts List
Overall

9
Exploded View and Parts List
Weight Stack Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 1.1 IF93010100 Weight Stack Frame 1
2 1.2 BS81223100 Foot Plate 2
3 1.3 GB17880.5M6*16.5DS17 Rivet Nut M6 12
4 1.4 AC32705800 U-nut M6 4

10
Exploded View and Parts List
Main Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 2.1 IF93040200 Main Frame 1
2 2.2 IT95014500 Adjustable Support 1
3 2.3 CWRVL0012200 Roll Pin 1
4 2.4 AXT3S5500 Torsional Spring 1
5 2.5 GB894.18FH12 Circlips For Shaft Φ8 2
6 2.6 GB5780M10*30DS20 Hex Head Bolt M10*30 1
7 2.7 GB17880.5M10*19.5DS17 Rivet Nut M6 2
8 2.8 IF93035000 Inner Wear Sleeve 2
9 2.9 BS81223100 Foot Plate 2

11
Exploded View and Parts List
Bottom Cross Brace ASSY Bottom Cross Brace
Sub ASSY
ItemNo. Grade No. Part No. Description QTY
1 3.1 IF93040300ASSY Bottom Cross Brace Sub ASSY 1
2 3.2 IF930127ASSY Cable Connector ASSY 1
3 3.3 IF81105500V1 Fixed BoltΦ9.4*47.5*M8 1
4 3.4 GB9510DS2 Flat Washer Φ11*Φ20*2 2
5 3.5 NM8DS2 Nylon Lock Nut M8 1
ItemNo. Grade No. Part No. Description QTY
1 3.1.1 IF93040300 Bottom Cross Brace 1
2 3.1.2 BNH0053 Plug □44.5 2

12
Exploded View and Parts List
Back Cross Frame ASSY
Cable Connector ASSY
Bottom Bracket ASSY
ItemNo. Grade No. Part No. Description QTY
1 3.2.1 IF93012700 Cable Connector 1
2 3.2.2 BNH0738 Bush Φ18*Φ12.7*Φ9.5*9.5 2
ItemNo. Grade No. Part No. Description QTY
1 4.1 IF93040400 Back Cross Frame 1
2 4.2 KPSFID3000 Plug □50.8 1
ItemNo. Grade No. Part No. Description QTY
1 17.1 IF93012200 Bottom Bracket 1
2 17.2 GB17880.5M6*16.5DS17 Rivet Nut M6 2
3.2 4
17

13
Exploded View and Parts List
Right Cross Frame ASSY
Right Arm Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 5.1 IF93040500 Right Arm Frame 1
2 5.2 FE97151400 Buffer Set 1
3 5.3 V39500 Aluminum Grip Ring 1
4 5.4 V39600 Aluminum Grip Cap 1
5 5.5 GB2766205-2ZC3 Deep Groove Ball Bearing Φ25*Φ52*15 2
6 5.6 YZGB7710-32*3.2N19 Socket Set Screw 10-32UNF*3.2 4
7 5.7 IT95041700 Grip 1
8 5.8 FE97151800 Nylon Sleeve Φ32*Φ25.4*16 1
9 5.9 IT9315G1500 Position Adjustment Pin 1
ItemNo. Grade No. Part No. Description QTY
1 7.1 IF93040700 Right Cross Frame 1
2 7.2 IN-D51202800 Nylon Sleeve Φ32*Φ25.4*28 1
3 7.3 CF37543400 Plug □38.1*76.2 1

14
Exploded View and Parts List
Left Cross Frame ASSY
Left Arm Frame ASSY
ItemNo. Grade No. Part No. Description QTY
1 6.1 IF93040600 Left Arm Frame 1
2 6.2 FE97151400 Buffer Set 1
3 6.3 V39500 Aluminum Grip Ring 1
4 6.4 V39600 Aluminum Grip Cap 1
5 6.5 GB2766205-2ZC3 Deep Groove Ball Bearing Φ25*Φ52*15 2
6 6.6 YZGB7710-32*3.2N19 Socket Set Screw 10-32UNF*3.2 4
7 6.7 IT95041700 Grip 1
8 6.8 FE97151800 Nylon Sleeve Φ32*Φ25.4*16 1
ItemNo. Grade No. Part No. Description QTY
1 8.1 IF93040800 Left Cross Frame 1
2 8.2 CF37543400 Plug □38.1*76.2 1

15
Exploded View and Parts List
Seat Pad Frame ASSY
Cam Frame Assy
ItemNo. Grade No. Part No. Description QTY
1 10.1 IF93041000 Cam Frame 1
2 10.2 FE97041100 Scaleboard 1
3 10.3 GB70M8*10DS2 Socket Head Cap Screw M8*10 2
4 10.4 IN-S10111200 Nylon Sleeve Φ17*10.5 2
5 10.5 GB2766205-2ZC3 Socket Set Screw 10-32UNF*3.2 2
ItemNo. Grade No. Part No. Description QTY
1 11.1 IF93041101 Seat Pad Frame 1
2 11.2 CF31630600 Plug □38*101.6*2.5 2
3 11.3 GB17880.5M10*19.5DS17 Rivet Nut M6 4

Inches
Millimeters
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
FHCS = Flat Head Cap Screw
HHB = Hex Head Bolt
Measurement Guide
Diameter of bolt
(mm/inch) M6(1/4") M8(5/16") M10(3/8") M12(1/2") M16(5/8")
Tightening
torque (N.m) 9~12 22~30 45~59 78~104 193~257
Operational
methods for
adult men
The strength of
the wrist
The strength of
the wrist and
forearm
The strength of
the entire arm
The strength of
the arm and
upper body
with all strength
16
CRPHS = Cross Recessed Pan
Head Screw

17
Assembly Instructions
Assembly of the equipment takes professional installers about 2 hours. If this
is the first time you have assembled this type of equipment, plan to spend
more time. It is strongly recommended to assemble the equipment by
professional installers. You may find it quicker, safer, easier to assemble this
equipment with the help of a friend, as some of components may be large,
heavy or awkward to handle alone. It is important that you assemble your
product in a clean, clear, uncluttered area. This will enable you to move around
the product while you are fitting components and reduce the possibility of
injury during assembly.
As with any assembled part, proper alignment and adjustment is critical. While
tightening the fasteners, be sure to leave room for adjustments. Do not fully
tighten the fasteners until instructed to do so. Be careful to assemble the
components in the sequence presented in this guide.
NOTE

STEP 1
Attach the Weight Stack Frame ASSY (#1), the Main Frame ASSY (#2), the Bottom Cross
Brace ASSY (#3) and the Back Cross Frame ASSY (#4) using:
four M10*120 HHB (#35) two M10*75 HHB (#36)
two M10*30 HHB (#37) thirteen Φ11*Φ20*2 Flat Washer (#50)
two Φ10 Spring Washer (#51) five M10 Nylon Lock Nut (#52)
Note: Wrench tighten bolts and nylon lock nuts.
Assembly
18

Assembly
19
STEP 2
1. Attach the Left Arm Frame ASSY (#6) to the Left Cross Frame ASSY (#8), and attach the
Cam Frame Assy (#10), the Washer (#53) and the Right Arm Frame ASSY (#5) to the
Right Cross Frame ASSY (#7) in sequence.
Note: When installing the Right Arm Frame ASSY (#5), the Position Adjustment
Pin (#5.9) is in the middle of two Nylon Sleeves.
2. Attach the above two combinations and the Top Cross Frame (#9) to the Main Frame
ASSY (#2) using:
two M10*25 SHCS (#42) two M10*60 HHB (#44)
two M10*130 HHB (#45) eight Φ11*Φ20*2 Flat Washer (#50)
four M10 Nylon Lock Nut (#52)
Note: Don't wrench tighten bolts until the Right Arm Frame ASSY (#5) and the
Left Arm Frame ASSY (#6) were adjusted to the same height.
3. Attach the Seat Pad Frame ASSY (#11) to the Main Frame ASSY (#2) using:
four M10*30 HHB (#37) four Φ10 Spring Washer (#51)
four Φ11*Φ20*2 Flat Washer (#50)

STEP 3.1
Attach two Cable ASSYs (#14) to the Bottom of the Arm Frame ASSY (#5/#6) using:
two M10*15 HHB (Nylok) (#37)
two M10 Hex Nut (#46)
Assembly
20