Aerpro FTS800 Operator's manual

DC TO DC
POWER&INVERTER&
USER INSTRUCTION MANUAL
Applicable for: FTS800/FTS1000/FTS1500

 Description
Power Inverters are products which change direct current (DC) electricity to
alternating current (AC) electricity. It has been widely used in cars, boats,
mobile offices, telecommunications, public security, emergency and so on.
This power inverter incorporates a unique circuit design, with the advantage of
a compact size, light, super stable, and high conversion efficiency. It has five
protection functions which include, input under voltage protection, input over
voltage protection, overload protection, over temperature protection and output
short circuit protection. These five functions can protect the electrical
equipment and the circuit of the car.
Please read instructions carefully before use.
 Features and cable diagram
1. Fan 5.Faultlight red light
2. DC input “+” terminal (RED) 6. AC output socket
3. DC input”-” terminal (BLACK) 7. On/Off switch
4. Power light green light
（Pictures may look different from the actual product）

 Connecting with the Inverter
Connecting the DC power in the wrong way (reverse polarity) will damage
the power inverter as well as the electrical equipment, please follow the
following steps below and make sure use the inverter in the correct way.
1. When used in the car, please connect the inverter with the DC cigar
lighter port.
a. Connect the red side of the cigar lighter with “+” terminal and fix it, the black
side connect with “_” terminal and fix it; Do not reverse them or it will damage
the inverter.
b. Insert the cigar lighter to the DC port of the car, turn on the power inverter,
the green LED light will on.
c. Insert the plug of the electric equipment (LOAD) into the AC socket of the
inverter.
2.When using outside car or exceeding 200W：
a. When using outside car or exceeding 200W please use the battery clip
cable to connect to the battery.
b. The battery clip cable have red and black two cables, connecting the red
cable with “+” and fix it, connecting the black cable with the “_” and fixed it;
c. The clip on the red cable connect with “+” terminal of the battery and the clip
on the black connect with the “+” terminal. Do not reverse or it will destroy the
power inverter.
d. Turn on the power inverter, the green light will on; Insert the plug of the
electric equipment into the AC socket of the inverter.
3.Scope of application：
a. Electrical equipment can be used:
Office equipment: Computers, printers, facsimile printers, scanners, working
lights;
Digital products: All kinds of mobile phone/digital camera/digital projector,
tablets, palm computer, recreational machines；
Small house electrical equipment: TV, fan, water dispenser, dust collector,
small electric iron, hair drier etc
Hardware appliance: Portable electric drill, electric iron etc.
b. Scope of electric appliances that are incompatible:
All electric appliances that exceed the rated power of the inverter；
Generally capacitive load and perceptual load appliances are not compatible:
Air conditioners, high powered electric drills, fridges, microwave ovens,
blenders；
We do not recommend using this inverter with appliances that have strict
power requirements, such as precise equipment. If using ordinary power
inverters with this kind of equipment it will affect the data measurement.

c. Scope of electric appliance that are incompatible with the USB
(Only for inverters with USB port)
 USB is only for charging, and does not support data exchange function;
 Before charging please check carefully if the charging current of the
appliance is below the inverters current. If it is exceeds the charging current of
the inverter please do not use, or it may destroy the USB port.
 Some appliances must be charged using a specific charger, so please don’t
charge with the inverters USB port.
4. Please use the inverter in ventilated areas and make sure the fan is not
blocked. Do operate the inverter in rain or in humid places, keep it dry.
In order to have a long lifespan of the inverter, please keep it working under
85% of the related power.
5. The inverter has input under voltage protection, input over voltage protection,
overload protection, over temperature protection and output short circuit
protection. If these conditions occur, the inverter will stop working and after a
short period where it has cooled down the inverter will restart working
automatically.
6. To save energy, the fan will not work unless:
a. The fan will work when the load exceeds 30% of the related power of the
inverter;
b. When the inside temperature of the inverter exceed 60 degree the fan will
work.
7. Extension cable use:
a. We do not recommend the use of any extension cables between the inverter
and the battery, as it will cause lost of DC electricity and effect of the inverters
output voltage.
b. If really need use extended we suggest you use high quality cable to reduce
the loss of electricity.
8. Other matters：
a. This is modified sine wave inverter; when measuring the voltage please use
precise equipment. (RMS)
b. When supplying power to an audio system, radio or TV, the appliance may
have interference and this is normal.
c. When using in cars, please don’t use the inverter while the engine has
stopped.
d. Please do not open the inverter, for servicing please use a professional.
 Safety:
1. Please do not operate the inverter while your hands are wet. Keep it away
from children.
2. The temperature of the shell will be high after extended use; so do not touch

it in case scalding.
3. Do not put metal objects into the inverter, this could cause electric shock.
4. Do not touch the metal of the socket while insert the plug to the socket of the
inverter.
5. Keep the inverter away from explosives.
6. Keep all AC electric equipment away from the inverter, it will damage the
inverter and also may cause electric shock.
 Protect function and Restart work method;
State description
Function
LED light
Alarm
AC output
Restart work method
Input low
voltage
alarm
Green on
Red off
Alarm
AC has output
When the voltage of
the battery returns to
the related range, the
alarm will stop
automatically
Input low
voltage shut
down
Green on
Red on
Alarm
No AC output
When the voltage of
the battery returns to
the related range, the
inverter will start
working, green light
will go on, red light will
go off.
Input over
voltage
protection
Green on
Red on
No
alarm
No AC output
When the voltage of
the battery returns to
the related range, the
inverter will start
working, green light
will go on, red light will
go off.
Over load
protection
Green on
Red on
No
alarm
No AC output
Reduce the load to
acceptable range the
inverter will start
working, green light
will go on, red light will
go off.
Over
temperature
protection
Green on
Red on
Alarm
No AC output
When the inside
temperature returns to
acceptable range the
inverter will restart
work, green light will
go on, red light will go
off.
Output short
circuit
Green on
Red off
No
alarm
No AC output
When short circuit
removed, the inverter
will start to work
automatically

（PS: The USB port will observe all protection conditions mentioned above）
 Waste disposal：
Please discard this product thoughtfully, do not pollute the environment.
 Specifications：
Model
800W
1000W
1500W
DC input
DC 12V （DC 11-15V）
AC output
AC 230V ± 10%
Output frequency
50 ± 3Hz
USB output（if have）
DC 5V （2100mA）
Continuous power
800W
1000W
1500W
Peak power
1600W
2000W
3000W
Output wave
Modified sine wave
Efficiency
≥80%
No load current
＜0.35A
＜0.45A
＜0.45A
Input under voltage
alarm
DC 10.2 –10.8V
Input under voltage
shut down
DC 9.2 –9.8V
Input over voltage shut
down
DC 15 –16V
Overload shut down
850W –1040W
1150W –
1300W
1700W –
1950W
Fuse
25A×4
30A×4
30A×6
The best working
temperature
5 –35
Cooling method
Fan
Accessories
Cigar cable，Battery clip cable
Technical Assistance：
If you need technical assistance with your Aerpro inverter now or in the
future contact Aerpro Support Australia: www.aerpro.com/Contact