Aethra THESEUS User manual

THESEUS
VIDEOPHONE
QUICK START GUIDE
Installing The Theseus is simple and easy. For easier installation follow the step-by-step
procedure below.
Remove The Theseus and accessories from packing. Make sure that all the
parts shown in the figure are present.
Step 1. UNPACKING THE BOX
Step 2. Handset Installation
The THESEUS guarantees optimum reproduction and
transmission of sound in handsfree mode. The telephone
receiver is intended for users who require private
communications.
The system is designed for handsfree operation. The
handset is for
users who desire private conversation.
1: Thread the CABLE D through the hole in the
BRACKET B (fig.1)
2: Lock the FIXING BRACKET B to the HANDSET
SUPPORT A, by sliding the BRACKET in the
direction of the arrows. (fig.2)
3: Lock the group to the BASE C. (fig.3)
4: Connect the CABLE plug D to the BASE C and fix
the cable as in the figure. (fig.4)
5: Connect the SPIRAL CABLE to the Handset
support.
Step 7. Network Setup
Step 8. How to make a call
© Aethra Telecomunicazioni - All rights reserved
We reserve the right to modify the technical specification
ee s
t
hsu
HOW TO MAKE A CALL
1 Select the call type (ISDN or IP).
2 Select the call rate.
ISDN calls.
1 From the main interface, lift the handset or press the
“HANDSFREE” button.
2 Dial the number to call using the numeric buttons
on the keypad
3 To end the call in HANDSFREE mode, press
the corresponding button.
IP calls.
1 From the main interface, lift the handset or press the
“HANDSFREE” button.
2 Enter the IP address of the terminal to be called using
the videophone's numeric keypad.
3 To end the call in HANDSFREE mode, press
the corresponding button.
ISDN Configuration
In order select the icons:
“menu”
“settings”
”installation”
“network interface”
”isdn”
In this section :
·Select the protocol “Euro” or “National”.
·Move to the icon Configure Access and press OK.
Access configuration (ISDN BRI National)
Number: enter the number associated
with ISDN access.
IP Configuration
The default setting is Automatic IP Address
HOW TO RECEIVE A CALL
Take the handset or press handfree button
.
For manual LAN configuration contact
the network administrator
THESEUS
AUDIO
VIDEO
LAN CABLEPOWER SUPPLY
MANUALS
ISDN CABLE
BRACKET
HANDSET
HANDSET
FIG.1
FIG.2 FIG.3
FIG.4
D
C

Step 3: Installation of the Handset (optional)
Step 4. Cable connection
Step 5. Keyboard
Step 6. First time equipment is switched on
1: Disconnect the HANDSET cable
from the BASE C.
2Dismantle the HANDSET SUPPORT and
the FIXING BRACKET.
3Plug the HEADSET connector cable
in the BASE C.
4Activate use of the headset via the Audio Out
settings.Refer to the section “Audio-Video-Data”
in this manual.
:
:
:
For opening or closing the last calls list.
For opening or closing the phonebook.
For reducing the current value of certain parameters
(volume, digital zoom).
For increasing the current value of certain parameters
(volume, digital zoom).
For viewing the local video camera image.
For disabling the micro-telephone and activating
the handsfree function.
For viewing your own image on the display.
For suppressing audio transmission during a connection.
To enable or disable the sending of video of yourself.
For selecting from different choices in menus.
For selecting from different choices in menus.
For selecting from different choices in menus.
For selecting from different choices in menus.
For selecting from different choices in menus.
For entering or exiting the main configuration
and management menu.
For confirming the last selection.
For opening the Help menu.
For closing the Help menu.
When the equipment is switched on for the first time,
the following menu will appear:
1 To select the desired language.
2 To control and to fill up the other edit box.
3 To select icon “menu” and save the setup.
10
LANLAN
Local Area Network
Ethernet connection
S
S
a/b1 /2
a
b
To S bus NT1