Aaeon HSB-CV1P User manual

Half-size SBC HSB-CV1P
HSB-CV1P
Intel
®AtomTM D2550/N2600 Processor
10/100/1000Base-TX Ethernet
2 SATA 3.0Gb/s
PCI Interface Expansion
8USB2.0,4COM
1 VGA, 1 LVDS
HSB-CV1P Manual Rev. A 2nd Ed.
July 2013

Half-size SBC HSB-CV1P
i
Copyright Notice
This document is copyrighted, 2013. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Half-size SBC HSB-CV1P
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
AMI is a trademark of American Megatrends Inc.
Intel®, Atom™ are trademarks of Intel®Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
SoundBlaster is a trademark of Creative Labs, Inc.
Please be notified that all other products’ name or trademarks not be
mentioned above are properties of their respective owners.

Half-size SBC HSB-CV1P
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
1 HSB-CV1P CPU Card with Active Cooler (Intel®
Atom™ D2550 version) or Passive Heatsink (Intel®
Atom™ N2600 version)
1 CD-ROM for manual (in PDF format) and drivers
1 Jumpers
1 Cable Kit for HSB series
1 SATA Cable
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Half-size SBC HSB-CV1P
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-4
2.4 List of Jumpers..........................................................2-5
2.5 List of Connectors .....................................................2-5
2.6 Setting Jumpers ........................................................2-7
2.7 Clear CMOS (JP1) ....................................................2-8
2.8 LVDS Operating Voltage Selection (JP2) .................2-8
2.9 LVDS Inverter/ Backlight Voltage Selection (JP3)....2-8
2.10 LVDS Inverter/ Backlight Bias/PWM Mode Selection
(JP4)................................................................................2-8
2.11 AT/ATX Power Mode Selection (JP5).....................2-8
2.12 COM2 RI/+5V/+12V Selection (JP6).......................2-9
2.13 LVDS Inverter/ Backlight Connector (CN1).............2-9
2.14 LVDS Connector (CN2)........................................... 2-9
2.15 Keyboard Connector (CN3)..................................... 2-10
2.16 PS2 Keyboard/Mouse Connector (CN4).................2-10
2.17 Digital I/O Connector (CN5)....................................2-11

Half-size SBC HSB-CV1P
v
2.18 RJ-45 Ethernet (CN6)..............................................2-11
2.19 RJ-45 Ethernet (CN7)..............................................2-11
2.20 External +5VSB Input Connector (CN8) .................2-11
2.21 HD Audio Codec with Realtek ALC888 (Optional)
Connector (CN9).............................................................2-12
2.22 USB Port #7 Connector (CN10)..............................2-12
2.23 Front Panel Connector 1 (FP1)...............................2-13
2.24 Front Panel Connector 2 (FP2)...............................2-13
2.25 Analog CRT Display Connector (VGA1).................2-13
2.26 USB Port #0 and #1 Connector (USB1)..................2-14
2.27 USB Port #2 and #3 Connector (USB2)..................2-14
2.28 USB Port #4 and #5 Connector (USB3)..................2-15
2.29 USB Port #6 Connector (USB4)..............................2-15
2.30 RS-232 Serial Port1 Connector (COM1).................2-15
2.31 RS-232/422/485 Serial Port2 Connector (COM2)...2-16
2.32 RS-232 Serial port3 Connector (COM3).................2-17
2.33 RS-232 Serial port4 Connector (COM4).................2-17
2.34 Infrared Connector (IR1).........................................2-17
2.35 Parallel Port Connector (LPT1)............................... 2-18
2.36 SATA Port2 Connector (SATA1).............................2-18
2.37 SATA Port1 Connector (SATA2).............................2-19
2.38 BIOS Debug Port (SPI1).........................................2-19
2.39 3-Pin CPU Fan Connector (4-Pin Optional) (FAN1)2-20
2.40 4-Pin System FAN Connector (FAN2) ....................2-20
2.41 4-Pin ATX Power Connector (ATX1).......................2-20

Half-size SBC HSB-CV1P
vi
2.42 DDR3 SODIMM Slot (DIMM1) ................................2-21
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 AMI BIOS Setup........................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2
A.2 F81866 Watchdog Timer Initial Program...............A-5
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 1st MB Memory Address Map ................................B-4
B.3 IRQ Mapping Chart................................................B-5
Appendix C Mating Connector
C.1 List of Mating Connectors and Cables.................. C-2
Appendix D AHCI Setting
D.1 Setting AHCI......................................................... D-2

Half-size SBC HSB-CV1P
Chapter 1 General Information 1- 1
General
Chapter
1
Information

Half-size SBC HSB-CV1P
1.1 Introduction
AAEON, a leading embedded boards manufacturer, is pleased to
announce the debut of the new generation Half-size Single Board
Computer—HSB-CV1P.
HSB-CV1P adopts Intel® AtomTM D2550/ N2600 Processor. The
system memory is deployed with 204-pin SODIMM DDR3
800/1066 up to 4 GB for Intel® AtomTM D2550 processor and up to
2 GB for Intel® AtomTM N2600 Processor. In addition, Realtek
RTL8111E supports two 10/100/1000Base-TX that allow a faster
network connection.
The display of HSB-CV1P supports CRT/LCD, LVDS/LCD
simultaneous and dual view displays. Moreover, two SATA
3.0Gb/s provide a better storage. Eight USB2.0, four COM Ports
(three RS-232, one RS-232/422/485) and 8-bit digital I/O are
configured on the HSB-CV1P as well. Full functions make
HSB-CV1P user friendly. This brand new slot CPU board is
developed to suit the requirements of Industrial/Factory
Automation, Transportation, banking machine, ITS, HMI and
workstation applications.
Chapter 1 General Information 1- 2

Half-size SBC HSB-CV1P
1.2 Features
Onboard Intel®Atom™ D2550/ N2600 Processor
Intel® NM10
DDR3 800 / 1066 SODIMM x 1, max. 4GB (D2550),
2GB (N2600)
Intel®Graphics Media Accelerator Supports DirectX 10,
OpenGL 3.0
HD CodecAudio Daughter Board (optional)
Realtek RTL 8111E, Gigabit Ethernet, RJ-45 x 2
USB 2.0 x 8 (Pin header x 3, 2 xOnboard Type A
connector x 2,One for Nano USB)
COM x 4 (RS-232 x 3, RS-232/422/485 x 1)
SATA 3.0Gb/s x 2, Digital I/O, Parallel Port x 1,
IrDA Port x 1*
VGA Output Connector for Display
Supports LVDS Up to 24-bit Single Channel (N2600
Supports 18-bit Single Channel Only)
Note*: The IrDAfunction will be disabled under Windows®7 Operating
System.
Chapter 1 General Information 1 - 3

Half-size SBC HSB-CV1P
1.3 Specifications
System
Processor Intel®Atom™
D2550/ N2600 processor,
(1.86 GHz for D2550, 1.6 GHz
for N2600)
System Memory 204-pin DDR3 SODIMM x 1,
Max. 4 GB (DDR3 800/1066) for
Intel®Atom™D2550;
Max. 2 GB (DDR3 800/1066) for
Intel®Atom™N2600
Chipset Intel
®NM10
I/O Chipset Fintek 81866F
Ethernet Realtek RTL8111E,
10/100/1000Base-TX, RJ-45 x 2
BIOS AMI Plug & Play SPI BIOS –
8 MB Flash
Wake On LAN Yes
Watchdog Timer 1~255 steps by software
program
H/W Status Monitoring Supports Fan Speed,
Voltages and Temperature
Monitoring
Expansion Interface PCI
Chapter 1 General Information 1- 4

Half-size SBC HSB-CV1P
Power Requirement +12V, ATX
Battery Lithium battery
Board Size 7.3”(L) x 4.8”(W) (185mm x
122mm)
Gross Weight 0.75 lb (0.35 Kg)
Operating Temperature 32˚F~ 140˚F (0˚C ~ 60˚C)
Storage Temperature -4˚F~ 158˚F (-20˚C ~ 70˚C)
Operating Humidity 10%~80% relative humidity,
non-condensing
Display: Supports CRT/LCD, LVDS/LCD, simultaneous and dual
view displays
Chipset Intel®Graphics Media
Accelerator supports DirectX 10,
OpenGL 3.0
Resolution Up to 1920x1200 for CRT;
Up to 1440x900 for LVDS
(D2550);
Up to 1366x768 for LVDS
(N2600)
LCD Interface 18/24-bit Single Channel LVDS
LCD for Intel®Atom™D2550;
18-bit Single Channel LVDS
LCD for Intel®Atom™ N2600
Output Interface VGA x 1, LVDS x 1
Chapter 1 General Information 1 - 5

Half-size SBC HSB-CV1P
Chapter 1 General Information 1- 6
I/O
Storage SATA 3.0Gb/s x 2
Serial Port COM x 4 (box header)
COM2 : RS-232/422/485 (Box
header 2.0mm)
COM1, COM3, COM4 :RS-232
(Box header 2.0mm)
Parallel Port SPP/EPP/ECP modes
USB Port USB2.0 x 8 (internal 5x2 pin
header x 3, onboard Type A
connector x 2)
PS/2 Port Mini-DIN PS/2 Keyboard and
Mouse x 1
Digital I/O Supports 8-bit (Programmable)
Audio(daughter board) High definition codec audio
daughter board (optional)

Half-Size SBC HSB-CV1P
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Guide
Chapter
2

Half-Size SBC HSB-CV1P
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Half-Size SBC HSB-CV1P
Chapter 2 Quick Installation Guide 2-3
2.2 Location of Connectors and Jumpers
Component Side
Component Side
Solder side

Half-Size SBC HSB-CV1P
Chapter 2 Quick Installation Guide 2-4
2.3 Mechanical Drawing
Component Side
Component Side
Solder side

Half-Size SBC HSB-CV1P
Chapter 2 Quick Installation Guide 2-5
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label
Function
JP1 Clear CMOS
JP2 LVDS Operating Voltage Selection
JP3 LVDS Inverter/ Backlight Voltage Selection
JP4 LVDS Inverter/ Backlight Bias/PWM Mode Selection
JP5 AT/ATX Power Mode Selection
JP6 COM2 RI/+5/+12V Selection
2.5 List of Connectors
The board has a number of connectors that allow you to configure your
system to suit your application. The table below shows the function of
each board's connectors:
Label
Function
CN1 LVDS Inverter/ Backlight Connector
CN2 LVDS Connector (Single Channel18/24bit)
CN3 Keyboard Connector
CN4 PS2 Keyboard/Mouse Connector
CN5 Digital I/O Connector
CN6 RJ-45 Ethernet
CN7 RJ-45 Ethernet
CN8 External +5VSB Input Connector
CN9
HD Audio Codec with Realtek ALC888 ( Optional )
Connector
CN10 USB Port #7 Connector
FP1 Front Panel Connector 1

Half-Size SBC HSB-CV1P
Chapter 2 Quick Installation Guide 2-6
FP2 Front Panel Connector 2
VGA1 Analog CRT Display Connector
USB1 USB Port #0 and #1 Connector
USB2 USB Port #2 and #3 Connector
USB3 USB Port #4 and #5 Connector
USB4 USB Port #6 Connector
COM1 RS-232 Serial port1 Connector
COM2 RS-232/422/485 Serial port2 Connector
COM3 RS-232 Serial port3 Connector
COM4 RS-232 Serial port4 Connector
IR1 Infrared Connector
LPT1 Parallel Port Connector
SATA1 SATA Port 2 Connector
SATA2 SATA Port 1 Connector
SPI1 BIOS Debug Port
DIMM1 DDR3 SODIMM Slot
BAT1A1 Battery
FAN1 3-Pin CPU Fan Connector (4-Pin Optional)
FAN2 4-Pin System Fan Connector
ATX1 4-Pin ATX Power Connector

Half-Size SBC HSB-CV1P
Chapter 2 Quick Installation Guide 2-7
2.6 Setting Jumpers
You configure your card to match the needs of your application by
setting jumpers. A jumper is the simplest kind of electric switch. It
consists of two metal pins and a small metal clip (often protected by a
plastic cover) that slides over the pins to connect them. To “close” a
jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have
three pins, labeled 1, 2 and 3. In this case you would connect either
pins 1 and 2 or 2 and 3.
123
Open Closed Closed 2-3
A pair of needle-nose pliers may be helpful when working with jumpers.
If you have any doubts about the best hardware configuration for your
application, contact your local distributor or sales representative before
you make any change.
Generally, you simply need a standard cable to make most
connections.