AFG Molly W860 User manual

Molly 6 Drawer Dresser (W860)
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
If you have any questions or missing parts, contact us. DO NOT return product parts to the
store where it was purchased before contacting AFG Customer Service.
AFG Customer Service:
E-mail: [e-mail]
Tel: [phone]
Model #: W860
PO #:
Serial #:

2014AFG Baby Furniture W860 Assembly Sheet © 2
W860 Parts Identification Sheet
DO NOT assemble dresser if parts of hardware are defective or missing.
Contact AFG for exchange; keep the original box for return authorizations.

2014AFG Baby Furniture W860 Assembly Sheet © 3
W860 Hardware Identification Sheet
DO NOT assemble dresser if parts of hardware are defective or missing.
Contact AFG for exchange; keep the original box for return authorizations.
PHILLIPS HEAD SCREWDRIVER (NOT INCLUDED)

2014AFG Baby Furniture W860 Assembly Sheet © 4

2014AFG Baby Furniture W860 Assembly Sheet © 5

2014AFG Baby Furniture W860 Assembly Sheet © 6

2014AFG Baby Furniture W860 Assembly Sheet © 7
Dresser Complete!

2014AFG Baby Furniture W860 Assembly Sheet © 8
*Dresser Wall Safety Strap
•TOOLS NECESSARY: RUBBER MALLET, PHILLIPS SCREW DRIVER.
•TOOLS AND HARDWARE SHOWN ARE NOT INCLUDED.
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE MAY TIP OVER. FOR
YOUR CHILD’S SAFETY, PLEASE INSTALL THE SAFETY WALL STRAP BEHIND THE
FURNITURE.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP
THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL US
AT: [e-mail] OR VISIT WWW.AFGBABYFURNITURE.COM
Safety Wall Strap 8” x 1.5” (1 pc) Washer (2 pcs) Screw D4 x 1-3/8” (1 pc)
Screw D4 x 3/4” (1 pc) Plastic Drywall Anchor (1 pc)
STEP 1
: Make a mark near the top of the back side of
the furniture (in the center toward the top frame o
f the
furniture of where you would like to install the safety
wall strap). Insert the short screw through the washer
and through the safety wall strap. Install the screw into
where the mark was made behind the furniture using a
Phillips screw driver
STE
P
2
: Locate a wall stud. With the back of the
furniture against the wall, locate the middle of the top
of the dresser and make a mark against the wall.
Measure 5cm down from the mark and drill a 1/8” pilot
hole through the wall stud and into the plaster wall.
CAUTION:
The changer unit must be centered on a
wall stud as shown. If you are unsure of how to locate
the wall stud, contact a professional contractor.
STEP
3
: Attach the wall strap to the wall stud using the
long 1-1/2” screw and washer as shown
. Make sure
strap holds steady and complete installation.
CAUTION:
Do not attempt to screw into the plaster
wall only. You must also screw into a wall stud.
Wall Stud

2014AFG Baby Furniture W860 Assembly Sheet © 9
One year limited warranty
AFG International Products Inc. © wants you to be satisfied with any product that bears the AFG name or logo. We
will provide promptly, at the request of the retailer, and without charge, any missing parts that have been reported, with
proper description, within 7 days of the purchase of the products. Our warranty guarantees optimal workmanship and
lack of significant defects. The product warranty lasts a year from the date of your purchase. Please keep the original
receipt so that we may process your one year limited warranty request. This warranty only covers new units with
original packaging. Ownership of the warranty is non-transferable. The warranty does not cover any used, second-hand,
or demo models. Our obligation under this warranty is to replace or repair the merchandise, at our option, free of
charge. This warranty does not cover any damaged or defective parts that result from normal wear and tear, abuse,
negligence, improper use or alteration to the finish design, and hardware. Specific rights issued by this warranty may
vary from state to state. Some states do not allow limitations on how long implied warranties last. DO NOT return
products to the store once a product is used, it cannot be resold and the materials and energy invested in the product
would go to waste. In the event that AFG determines that a defect that may result from customer abuse or misuse, we
will contact you with information about services and methods to prevent occurrences. We strongly recommend you
register your product with our company by filling out registration and mailing it back to us. This ensures you are
up-to-date with our products’ maintenance and information.
This warranty does not cover damage caused by accident, misuse or any use other than as intended and described in
this assembly sheet or damage resulting from failure to maintain and clean this product as specified in this assembly
sheet. This warranty applies only to the original purchaser of the AFG International Products Inc. product.
Thank you for choosing AFG.
MADE IN VIETNAM AFG ©