AG Neovo X-17E User manual

X-15E, X-17E & X-19E LED-Backlit Display
User Manualdisplays.agneovo.com

TABLE OF CONTENTS
2
Safety Information
Federal Communications Commission (FCC) Notice (U.S. Only)............................................................4
WEEE.......................................................................................................................................................4
Precautions
Notice.......................................................................................................................................................5
Cautions When Setting Up.......................................................................................................................5
Cautions When Using...............................................................................................................................6
Cleaning and Maintenance.......................................................................................................................6
Notice for the LCD Display.......................................................................................................................7
Chapter 1: Product Description
1.1 Package Contents..............................................................................................................................8
1.2 Wall Mounting Installation Preparation...............................................................................................9
1.2.1 Wall Mounting..........................................................................................................................9
1.2.2 Removing the Base Stand.......................................................................................................9
1.3 LCD Display Overview .......................................................................................................................10
1.3.1 Front View and Keypad Buttons..............................................................................................10
1.3.2 Rear View................................................................................................................................11
Chapter 2: Making Connections
2.1 Connecting the Power........................................................................................................................12
2.2 Connecting Input Source Signals.......................................................................................................13
2.2.1 Connecting a Computer ..........................................................................................................13
Using VGA Cables ......................................................................................................................... 13
Using DVI Cables...........................................................................................................................13
Using DisplayPort Cables ..............................................................................................................14
Connecting an Audio Device..........................................................................................................14
2.2.2 Connecting a Video Device.....................................................................................................15
Using HDMI Cables........................................................................................................................15
Chapter 3: Using the LCD Display
3.1 Turning on the Power.........................................................................................................................16
3.2 Selecting the Input Source Signal......................................................................................................16
3.3 Adjusting the Volume..........................................................................................................................17
3.4 Locking the OSD Menu......................................................................................................................17
3.5 Using Picture-in-Picture (PIP) ............................................................................................................18
3.5.1 PIP Options.............................................................................................................................18
3.5.2 PIP Swap.................................................................................................................................19
3.6 Using Auto Adjustment Function ........................................................................................................19
Chapter 4: On Screen Display Menu
4.1 Using the OSD Menu .........................................................................................................................20
4.2 OSD Menu Tree .................................................................................................................................22

3
TABLE OF CONTENTS
Chapter 5: Adjusting the LCD Display
5.1 BRIGHTNESS....................................................................................................................................25
5.2 COLOUR TEMP..................................................................................................................................27
5.3 IMAGE SETTING...............................................................................................................................28
5.4 ASPECT RATIO..................................................................................................................................31
5.5 PIP SETTING.....................................................................................................................................32
5.6 ANTI-BURN-IN...................................................................................................................................34
5.7 OSD SETTING...................................................................................................................................35
5.8 AUDIO SETTING................................................................................................................................36
5.9 SYSTEM.............................................................................................................................................37
5.10 ECO SMART....................................................................................................................................39
5.11 INPUT SELECT................................................................................................................................40
Chapter 6: Appendix
6.1 Warning Messages.............................................................................................................................41
6.2 Troubleshooting..................................................................................................................................42
6.3 Transporting the LCD Display ............................................................................................................44

 isplay peiains ........................................................................................................................45
7.2 Display Dimensions............................................................................................................................46
7.2.1 X-15E Dimensions.....................................................................................................................46
7.2.2 X-17E Dimensions.....................................................................................................................46
7.2.3 X-19E Dimensions.....................................................................................................................47

SAFETY INFORMATION
4
W E E E
Information for users applicable in European Union countries.
e sybl n e prdu r is paaging signies a is prdu as  be
disposed separately from ordinary household wastes at its end of life. Please kindly
be aware that this is your responsibility to dispose electronic eq uipment at recycling
centers so as to help conserve natural resources. Each country in the European Union
should have its collection centers for electrical and electronic eq uipment recycling.
For information about your recycling drop off area, please contact your local related
electrical and electronic eq uipment waste management authority or the retailer where
you bought the product.
F ederal Communications Commission ( F CC) N otice ( U. S. Only)
X-19E
This eq uipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This eq uipment generates,
uses and can radiate radio freq uency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this eq uipment
does cause harmful interference to radio or television reception, which can be determined
by turning the eq uipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the eq uipment and receiver.
• Connect the eq uipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an exp erienced radio/ TV technician for help.
anges r diains n epressly appred by e pary respnsible fr pliane uld
void the user’ s authority to operate the eq uipment.
Use only an RF shielded cable that was supplied with the display when connecting this display to a computer
device.
 preen daage i ay resul in re r s aard d n epse is appliane  rain r eessie
moisture.
THIS CLASS B DIGITALAPPARATUS MEETS ALL REQ UIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQ UIPMENT REGULATIONS.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

5
PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Symb ols used in this manual
This icon indicates the exi stence of a potential haza rd that could result in personal injury
or damage to the product.
This icon indicates important operating and servicing information.
N otice
• Read this User Manual carefully before using the LCD display and keep it for future reference.
• e prdu speiains and er infrain prided in is ser anual are fr referene nly ll
information is subject to change without notice. Updated content can be downloaded from our web site at
displays. agneov o. com.
• To register online, go to displays. agneov o. com.
• To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may
affect the determination of the warranty period.
Cautions W hen Setting Up
Do not place the LCD display near heat sources, such as a heater, exh aust vent, or in direct
sunlight.
Do not cover or block the ventilation holes in the housing.
Place the LCD display on a stable area. Do not place the LCD display where it may subject
to vibration or shock.
Place the LCD display in a well-ventilated area.
Do not place the LCD display outdoors.
Do not place the LCD display in a dusty or humid environment.
Do not spill liq uid or insert sharp objects into the LCD display through the ventilation holes.
ing s ay ause aidenal re eleri s r daage e  display

6
PRECAUTIONS
Cautions W hen Using
Use only the power cord supplied with the LCD
display.
The power outlet should be installed near the LCD
display and be easily accessible.
If an ext ension cord is used with the LCD display,
ensure that the total current consumption plugged
into the power outlet does not exce ed the ampere
rating.
Do not allow anything to rest on the power cord. Do
not place the LCD display where the power cord
may be stepped on.
f e  display ill n be used fr an indenie
period of time, unplug the power cord from the
power outlet.
To disconnect the power cord, grasp and pull by the
plug head. Do not tug on the cord; doing so may
ause re r eleri s
Do not unplug or touch the power cord with wet
hands.
Cleaning and Maintenance
The LCD display comes with NeoVTM Optical
Glass. Use a soft cloth lightly moistened with a mild
detergent solution to clean the glass surface and the
housing.
Do not rub or tap the surface of the glass with sharp
or abrasive items such as a pen or screwdriver. This
may result in scratching the surface of the glass.
Do not attempt to service the LCD display yourself,
refer  ualied serie persnnel pening r
removing the covers may exp ose you to dangerous
voltage or other risks.
W arning:
Unplug the power cord
from the power outlet and
refer  ualied serie
personnel under the following
conditions:
♦When the power cord is
damaged.
♦If the LCD display has been
dropped or the housing has
been damaged.
♦If the LCD display emits smoke
or a distinct odor.
W arning:
Ceiling mount or mount
on any other horizo ntal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable conseq uences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizo ntal surface overhead
are strongly advised to contact
 e fr nsulains and
solutions to help ensure a most
pleasurable and fullling display
exp erience.

7
PRECAUTIONS
N otice for the LCD Display
In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
Due to the lifespan of the lamp, it is normal that the brightness q uality of the LCD display may decrease
with time.
When static images are displayed for long periods of time, the image may cause an imprint on the LCD
display. This is called image retention or burn-in.
To prevent image retention, do any of the following:
• Set the LCD display to turn off after a few minutes of being idle.
• Use a screen saver that has moving graphics or a blank white image.
• Switch desktop backgrounds regularly.
• dus e  display  l brigness seings
• Turn off the LCD display when the system is not in use.
Things to do when the LCD display shows image retention:
• Turn off the LCD display for ext ended periods of time. It can be several hours or several days.
• Use a screen saver and run it for ext ended periods of time.
• Use a black and white image and run it for ext ended periods of time.
When the LCD display is moved from one room to another or there is a sudden change from low to high
ambient temperature, dew condensation may form on or inside the glass surface. When this happens, do
not turn on the LCD display until the dew disappears.
Due to humid weather conditions, it is normal for mist to form inside the glass surface of the LCD display.
The mist will disappear after a few days or as soon as the weather stabilize s.
There are millions of micro transistors inside the LCD display. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.

CHAPTER 1: PRODUCT DESCRIPTION
8
1. 1 Package Contents
When unpacking, check if the following items are included in
the package. If any of them is missing or damaged, contact your
dealer.
Q uick Start G uide
Pow er cord
N ote:
♦The pictures are for reference
only. Actual items may vary
upon shipment.
V G A cab le
Pow er adapter
LCD Display
Audio cab le
N ote:
Must use only the supplied power
adapter:
♦Lite-on Technology Corporation
Model no.: PA-1041-81
Rating: 12V/ 3.33A
♦DELTA ELECTRONICS, INC.
Model no.: ADP-40DD B
Rating: 12V/ 3.33A
Chapter 1: Product Description
X-15E, X-17E & X-19E
www.agneovo.com
X-15E/X-17E/X-19E_Quick Guide_V010
Quick Start Guide
X-15E, X-17E & X-19E LED-Backlit Display
W arranty card

9
PRODUCT DESCRIPTION
1. 2 W all Mounting Installation Preparation
1. 2. 1 W all Mounting
1R emov e the b ase stand.
See procedures below.
2W all mount the LCD display.
Screw the mounting bracket to the VESA holes at
the rear of the LCD display.
1. 2. 2 R emov ing the B ase Stand
1 Carefully place the
product screen side
down on a cushioned
surface that will
protect product and
screen from damage.
2 Remove the screws
securing the base
stand from the LCD
display.
3 Detach the base
stand.
4 Lock screws back.
N ote:
Take measures to prevent the
LCD display from falling down
and lessen possible injury and
damage to the display in case of
earthq uakes or other disasters.
♦Use only the 75 x 75 mm and
100 x 100 mm wall mount kit
recommended by AG Neovo.
♦Secure the LCD display on a
solid wall strong enough to bear
its weight.
N ote:
To protect the glass panel, place a
towel or soft cloth before laying the
LCD display down.
W arning:
Ceiling mount or mount
on any other horizo ntal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable conseq uences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizo ntal surface overhead
are strongly advised to contact
AG Neovo for consultations and
solutions to help ensure a most
pleasurable and fullling display
exp erience.
100 mm
75 mm
100 mm 75
mm

10
PRODUCT DESCRIPTION
1. 3 LCD Display Ov erv iew
1. 3. 1 F ront V iew and K eypad B uttons
6
4
7
5
9
8
2
3
1
Display screen
The LCD display screen is protected by
NeoVTM Optical Glass.
Green - Power on
Amber - Standby mode
Off - Power off
SOUR CE
• Press repeatedly to select the input signal
source.
UP
• Press repeatedly to select PIP option.
• During OSD menu selection, press to move
up a menu or submenu.
ME N U
• Press to display the OSD menu.
• Press again to hide the OSD menu.
DOW N
• Press to swap the PIP main and sub picture.
• During OSD menu selection, press to move
up a menu or submenu.
LE F T
• Press to decrease the volume.
• During OSD menu selection, press to adjust the
settings.
R IG H T
• Press to increase the volume.
• During OSD menu selection, press to select an
option and adjust the settings.
AUT O
• For VGA input signal source, press to perform
auto adjustment.
• During OSD menu selection, press to close the
OSD menu or exi t a submenu.
POW E R / LE D indicator
• Press to turn the power on or off.
1
7
6
5
4
3
2
8
9
E coSmart sensor: Detect ambient lighting
conditions and automatically adjust the
brightness levels. Refer to page 40 “ ECO
SMART” for more information.
10
10

11
PRODUCT DESCRIPTION
1. 3. 2 R ear V iew
AUDIO INDVIDC IN HDMIDisplayPortVGA
1 2 3 5 64
DC pow er input
Use to connect the power adapter.
DisplayPort connector
Use to connect a PC or video device using a
displayport cable for digital input signal.
DV I connector
Use to connect a PC using DVI cable
for digital input signal.
14
2
3H DMI connector
Use to connect an input device using
HDMI cable for digital input signal. Audio port
Use to connect an audio cable for the PC’s
audio input.
6
V G A connector
Use to connect a PC using a VGA cable for
analogue input signal.
5

CHAPTER 2: MAKING CONNECTIONS
12
2. 1 Connecting the Pow er
1Connect the power cord to the power adapter.
2Connect the power adapter to the DC power input at the rear of the LCD display.
3Connect the power cord plug to a power outlet or a power supply.
DC IN
Caution:
♦Make sure that the LCD display is
not connected to the power outlet
before making any connections.
Connecting cables while the power
is ON may cause electric shock or
personal injury.
Caution:
♦When unplugging the power cord,
hold the power cord by the plug
head. Never pull by the cord.

13
MAKING CONNECTIONS
2. 2 Connecting Input Source Signals
2. 2. 1 Connecting a Computer
Using V G A Cab les
Connect one end of a D-sub cable to the VGA connector of the LCD display and the other end to the D-sub
connector of the computer.
VGA
Using DV I Cab les
Connect one end of a DVI cable to the DVI connector of the LCD display and the other end to the DVI
connector of the computer.
DVI

14
MAKING CONNECTIONS
Using DisplayPort Cab les
Connect one end of a DisplayPort cable to the DisplayPort connector of the LCD display and the other end to
the DisplayPort connector of the computer.
DisplayPort
Connecting an Audio Dev ice
Connect one end of an audio cable to the audio port at the rear of the LCD display and the other end to the
audio out port of the computer.
AUDIO IN

15
MAKING CONNECTIONS
2. 2. 2 Connecting a V ideo Dev ice
Using H DMI Cab les
Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI
connector of your device.
HDMI

CHAPTER 3: USING THE LCD DISPLAY
16
3. 1 T urning on the Pow er
N ote:
♦The LCD display still consumes
power as long as the power
cord is connected to the power
outlet. Disconnect the power
cord to completely cut off
power.
N otes:
♦This function works only if
SOUR CE DE T E CT is set to
MAN UAL. Refer to page 38.
♦After selecting an input source
signal, the input source signal
message appears on the
sreen briey
For exa mple, HDMI is selected
the following message is
displayed.
HDMI INPUT
♦If the selected input source
signal is not connected to the
LCD display or is turned off, the
no signal message is displayed
on the screen.
NO
SIGNAL
♦If the resolution or the graphics
card of the connected computer
is set too high, the input out of
range message is displayed.
INPUT SIGNAL
OUT OF RANGE
1Touch the button to call out the input
source menu.
VGA
DVI
HDMI
DP
2Touch the por qbutton to highlight
an input source.
3Touch the ubutton to select the input
source.
POW E R button /
LE D indicator
1Plug the power cord to a power outlet
or power supply.
2Touch the POW E R button to turn the
LCD display on.
The LED indicator turns GREEN.
When the LCD display is turned on,
touch the POWER button to turn off the
LCD display.
The LED indicator turns off.
3. 2 Selecting the Input Source Signal
SOUR CE button

17
USING THE LCD DISPLAY
3. 3 Adjusting the V olume
3. 4 Locking the OSD Menu
Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the
keypad.
To lock the OSD, press and hold the keypad buttons listed below for at least 5 seconds or until the
OSD
LOCK OUT message appears.
When the OSD is locked, all keypad buttons are inactivated.
T ype of OSD Lock Lock Operation Unlock Operation
Lock all buttons Touch and hold the u, p, and q
buttons for 5 seconds.
Touch and hold the u, p, and q
buttons for 5 seconds or until the OSD
menu appears.
Lock all buttons exce pt
the POW E R button. Touch and hold the t, p, and q
buttons for 5 seconds.
Touch and hold the t, p, and q
buttons for 5 seconds or until the OSD
menu appears.
V OLUME buttons
Adjusting the V olume
1Touch either the or buttons to call out the volume bar.
2Touch the button to increase volume.
Touch the button to decrease volume.
To mute the audio, set the volume to 0.

18
USING THE LCD DISPLAY
3. 5 Using Picture- in- Picture ( PIP)
The Picture-in-Picture (PIP) feature allows viewing of more than one input source signal on the LCD display.
3. 5. 1 PIP Options
Touch the pbutton repeatedly to enable and scroll among the PIP options. Options are as follows:
• PIP On: The sub source signal is displayed within the main source signal.
• PBP (Picture-by-Picture): The main source and the sub source signals are displayed side by side with
eq ual display size .
• PIP Off: PIP function is disabled, only the main source signal is displayed.
N ote:
♦The main source and sub
source signals can be set in
PIP Setting, see page 33.
♦Some input source signal
combinations do not support
PIP. See PIP Compatibility
table on page 34.
PIP On
PBP
PIP Off

19
USING THE LCD DISPLAY
3. 5. 2 PIP Sw ap
The main and the sub source signals set in PIP Setting can be easily
swapped using the keypad.
Main source
Sub source
Touch the qbutton to swap the main source and the sub source
signals. See illustration below.
Main source
Sub source
3. 6 Using Auto Adjustment F unction
Auto Adjustment function automatically tunes the LCD display to its
optimal setting, including horizo ntal position, vertical position, clock,
and phase.
Touch the button to perform auto adjustment.
The message auto adjusting is displayed on the screen.
AUTO
ADJUSTING
During auto adjustment, the screen will slightly shake for a few
seconds.
When the message disappears, auto adjustment is completed.
N ote:
♦PIP Swap can only be ex ecuted
if PIP is enabled, see page 34.
N ote:
♦Auto Adjustment function is
available only during VGA input
signals.
♦It is recommended to use the
auto adjustment function when
using the LCD display for the
rs ie r afer a resluin r
freq uency change.

CHAPTER 4: ON SCREEN DISPLAY MENU
20
4. 1 Using the OSD Menu
Operation
1Display the main menu screen.
1920x1080 60Hz
BRIGHTNESS
COLOUR TEMP.
IMAGE SETTING
ASPECT RATIO
PIP SETTING
ANTI-BURN-IN
OSD SETTING
AUDIO SETTING
SYSTEM
ECO SMART
INPUT SELECT
LANGUAGE
INFORMATION
EXITENTER SELECT
BRIGHTNESS 50
BLACK LEVEL 50
BACKLIGHT50
CONTRAST50
Touch .
2Select the menu.
1920x1080 60Hz
BRIGHTNESS
COLOUR TEMP.
IMAGE SETTING
ASPECT RATIO
PIP SETTING
ANTI-BURN-IN
OSD SETTING
AUDIO SETTING
SYSTEM
ECO SMART
INPUT SELECT
LANGUAGE
INFORMATION
EXITENTER SELECT
BRIGHTNESS 50
BLACK LEVEL 50
BACKLIGHT50
CONTRAST50
1Touch the por qbutton.
2 Touch the ubutton to enter the
submenu.
Navigation Window