AG Neovo P-19 User manual

Downloaded from ManualMonitor.com Manuals

1
Table of Contents
Precautions ................................................................................................... 2
Warning on installation............................................................................... 2
Warning on power connection ................................................................... 2
Adjusting Your LCD display Viewing Angle ............................................... 2
Wall Mount .................................................................................................3
First, fold the base .................................................................................. 3
Second, lock the decoration cover.......................................................... 3
Third, mount the LCD display on the wall ............................................... 3
Warning on Maintenance ........................................................................... 4
Warning on transportation ......................................................................... 4
Package Contents...................................................................................... 5
Control Buttons ..........................................................................................6
Installation .................................................................................................. 7
Adjusting Your LCD Display .........................................................................8
Selecting OSD Features ............................................................................ 8
D-SUB Input ............................................................................................ 8
DVI Input ...............................................................................................18
CVBS Input ........................................................................................... 26
S-Video Input ........................................................................................ 34
Warning Messages and Troubleshooting ................................................... 42
Warning Messages .................................................................................. 42
Troubleshooting Guide............................................................................. 43
Technical Specifications ............................................................................. 44
Specifications ........................................................................................... 44
P-19....................................................................................................... 44
P-17....................................................................................................... 44
Regulation................................................................................................... 45
FCC compliance ......................................................................................45
WEEE....................................................................................................... 46
Hg............................................................................................................. 46
Downloaded from ManualMonitor.com Manuals

2
Precautions
Warning on installation
• Do not cover or block the ventilation holes in the case.
• Do not install the monitor near heat sources such as radiators or air ducts, or in a
place subject to direct sunlight, excessive dust, mechanical vibration or shock.
Warning on power connection
• Use an appropriate power cord for your local power supply.
• The outlet should be installed near the monitor and be easily accessible.
• Do not allow anything to rest on the power cord.
• Disconnect the power plug from the power outlet under following conditions:
 If you will not use it for an indefinite period time.
 When the power cord or plug is damaged of frayed.
 If the product has been dropped or the cabinet has been damaged.
 If the product exhibits a distinct change in performance, indicate a need for
service.
Adjusting Your LCD display Viewing Angle
• You can adjust your LCD display between 10°~30° by holding the top of the panel
with both hands and pushing back and forth to adjust the viewing angle to the
desired angle.
• The maximum tilt angle of the monitor is 30°; the monitor can not be pushed down
any further when the tilt angle is at the 30° position.
Downloaded from ManualMonitor.com Manuals

3
Wall Mount
If you want to mount your LCD display on the wall, please follow the below instructions.
First, fold the base
If you want to hang this LCD monitor on the wall, please push the blue key on the
bottom of base to the direction as symbol indicated and fold to 90 degrees as shown
in the illustration below.
Second, lock the decoration cover
(1) By facing the tab upwards, plug the decoration cover into the rectangle holes on the
bottom of front bezel.
(2) Press the decoration cover to perfectly into the gap of the front bezel.
Third, mount the LCD display on the wall
The wall mount access holes are compliant
to VESA standard. An M4 screw of length
less than 10mm is recommended.
The four wall mount access holes allow
screws of M4 * 0.7 type to fit in. The length
of which should not exceed 9.4mm.
Downloaded from ManualMonitor.com Manuals

4
Warning on Maintenance
• Clean the cabinet, glass, and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzene.
• Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such
as a pen or screwdriver. This type of contact may result in a scratched glass.
• Do not insert sharp objects or spill liquid into the monitor through ventilation holes.
They may cause accident fire, electric shock or failure.
• Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage potentials or other risks.
Warning on transportation
• When you transport this monitor for repair or shipment, use the original carton and
packing materials.
Downloaded from ManualMonitor.com Manuals

5
Package Contents
Before using this monitor, check the following items are included in your carton box:
• Monitor (*1)
• Power adapter (*1)
(For use only with the power supply Li-shin LSE0452B1280 or Linearity
LAD10PFKB6)
• Power cord (*1)
• D-sub 15-pin signal cable (*1)
• Digital DVI signal cable (*1)
• S- Video cable (*1,) (Optional)
• CVBS cable (*1) (Optional)
• USB cable (*1)
• Microphone cable (*1) • Audio cable (*1)
• CD-ROM (containing Windows information file and user’s manual)
• Quick Guide
• Decoration cover (for wall mount use only)
Downloaded from ManualMonitor.com Manuals

6
Control Buttons
Front View
Key Controls located on the bottom center of the base
ON/OFF
Push once to turn your LCD display ON (green color). Push again for 3 seconds
to turn it OFF (amber color).
Menu
Push once to turn on the OSD menu. The six blue keys surrounding will light on.
The blue buttons and green button refers to the corresponding function
on the OSD menu.
Function
Function keys, which can be one of the following:
 Hot key.
 Main menu item.
 Function loop e.g. Input select on D-SUB, DVI, CVBS, S-Video.
 ON/OFF loop e.g. Subwoofer can be turned on or off.
 allows adjustment in terms of respective measurement.
 , , allows you to go to next menu, return to previous menu,
and exit the OSD menu respectively.
Downloaded from ManualMonitor.com Manuals

7
Installation
• Remove all the packages from the panel.
• Place your LCD display in a suitable place. Make sure that there is enough space
for adjustment, especially the rear of the panel.
Connecting LCD Display to PC (Analog)—
1. Turn off your PC and connect the D-sub 15-pin VGA cable included in the
package to the VGA port on your PC.
2. Connect the adaptor to the Adaptor IN socket at the back of your LCD display.
3. Connect one end of the power cord to a power source and another end to the
adaptor.
4. Turn on your PC.
5. Turn on your LCD display. If the power LED is green and there is no display on
the screen, please refer to the Warning Messages and Troubleshooting Guide in
the User Manual.
6. Change the display resolution to 1280X1024 pixels at 60Hz from your PC. Push
the menu button and then the Auto Adjustment button. The panel will
automatically tune to the optimal performance.
Connecting LCD Display to a Digital Source (Digital, DVI)—
1. Turn off the PC and connect one end of the DVI-D digital cable included in the
package to the DVI port at the back of the panel and another end to digital out
on your VGA card.
2. Repeat steps 2-6 of the previous section.
Connecting LCD Display to Video Source (CVBS or S-Video)—
1. Turn off the equipment (e.g. TV, camera) and connect one end of the CVBS or
S-Video cable included in the package to the CVBS or S-Video port at the back
of the panel and another end to video out of the particular equipment.
2. Repeat steps 2-6 of the previous section.
Downloaded from ManualMonitor.com Manuals

8
Adjusting Your LCD Display
In the OSD menu, you will find all kinds of features to help you adjust your LCD display
to the optimal performance.
Important! Though manual adjustment of the LCD display is available, we strongly
recommend that you use the panel’s auto adjustment function. This will
automatically tune your LCD display to the optimal performance. Simply
push the Auto Adjustment hot key to enable the auto adjustment
function. Additionally, we recommend that you use the auto adjustment
function every time after you have changed the resolution or frequency of
your display.
Selecting OSD Features
Push the menu button to call out the OSD window. Then the blue keys will be turned on.
Each of these keys corresponds to the respective function appear on the OSD menu of each
page.
OSD menu: divided into seven areas that match exactly the position of the control key.
“Information” bar, which appears in every page, provides necessary operating instructions.
D-SUB Input
(I) Page 1: Hot key
Once the function key is being pressed, the frame color will become red.
Once the user press the “Menu” button, the first page will show all the hot keys that are
mostly used. When pressing , the menu goes to the next page, which is the Main
menu.
Auto Adjustment
Volume –
Mute
Input Select
Volume +
Luminance
Information Bar
Downloaded from ManualMonitor.com Manuals

9
Auto Adjustment
Automatically adjust to the best user viewing condition.
But timing resolution fewer than 800x600 can only be manually adjusted.
Input Select
Loop among input modes D-SUB, DVI, CVBS and S-Video signal.
Volume – and Volume +
Adjust speaker volume
Reduce the volume Increase the volume
Downloaded from ManualMonitor.com Manuals

10
Mute
Loop on/off function to mute speaker and earphone volume.
Luminance
Loop among luminance levels Light, Normal and Dark. If sRGB function is on, user cannot
adjust Luminance .
Downloaded from ManualMonitor.com Manuals

11
(II) Page 2: Main Menu
The main menu categorizes the functions of the monitor into six groups. Each of the
area will go to its corresponding sub-menu.
Geometric
allows adjustment in terms of respective measurement
(1) Horizontal Position (2) Vertical Position
(3) Clock (4) Phase
Geometric
A
udio
Tools
Video
Color
Language
Downloaded from ManualMonitor.com Manuals

12
Video
allows adjustment in terms of
respective measurement.
(1) Brightness (2) Contrast
If sRGB function is on, user cannot adjust Brightness and Contrast .
(3) Hue / Saturation
Hue / Saturation does not work with D-SUB input signal.
(4) Sharpness
If the timing resolution of the PC is 1280 x 1024, sharpness will not perform.
Downloaded from ManualMonitor.com Manuals

13
Audio
(1) 3D
Loops between “On” and “Off”.
(2) Subwoofer
Loops between “On” and “Off”.
(3) Bass (4) Treble
allows adjustment in terms of respective measurement.
Downloaded from ManualMonitor.com Manuals

14
Colors
(1) Auto Color
Automatically adjust to user’s optimal color.
(2) User Color
Loops among Red, Green and Blue color. allows adjustment in terms of
respective measurement.
Downloaded from ManualMonitor.com Manuals

15
(3) sRGB
Loops between “On” and “Off”. If sRGB function is on, user cannot adjust Luminance
, Brightness and Contrast .
(4) Color Temperature
Loops between temperature 6500k and 9300k.
Tools
Downloaded from ManualMonitor.com Manuals

16
(1) OSD Timer
allows adjustment in terms of respective measurement.
(2) OSD H Position / OSD V Position / OSD Transparency
Loops among OSD H Pos., OSD V Pos. and OSD Transparency. allows
adjustment in terms of respective measurement.
(3) Recall
Recall to manufacturing default value.
Downloaded from ManualMonitor.com Manuals

17
(4) Mode
Loop between Graphic and Text mode. Only works in DOS mode (does not work with
other operation system such as Windows).
Language
allows language selection by scrolling.
OSD language option has two versions:
(1) Europe & USA: English, German, French, Spanish, Italian, Holland, Russian,
Czech, Polish, Romanian.
(2) Rest of the world: English, German, French, Spanish, Traditional Chinese,
Simplified Chinese, Japan.
English German French Spanish Italian Dutch Russia
Czech Polish Romania Traditional
Chinese
Simplified
Chinese
Japanese
Downloaded from ManualMonitor.com Manuals

18
DVI Input
(I) Page 1: Hot key
Once the function key is being pressed, the frame color will become red.
Once the user press the “Menu” button, the first page will show all the hot keys that
are mostly used. When pressing , the menu goes to the next page, which is the
Main menu.
Auto Adjustment
Auto Adjustment does not work with DVI input signal.
Input Select
Loop among input modes DVI, CVBS S-Video and D-SUB signal.
Auto Adjustment
Volume –
Mute
Input Select
Volume +
Luminance
Information Ba
r
Downloaded from ManualMonitor.com Manuals

19
Volume – and Volume +
Adjust speaker volume
Reduce the volume Increase the volume
Mute
Loop on/off function to mute speaker and earphone volume.
Luminance
Loop among luminance levels Light, Normal and Dark. If sRGB function is on, user cannot
adjust Luminance
Downloaded from ManualMonitor.com Manuals