AgfaPhoto d-lab.2 8060/260 User manual

Operation Manual
Digital Minilabs
Operation
Order number DD+18060A162D0
Edition 2005-05-01
Version English, 04092_01
d-lab.2:
8060/260,
8060/803, 8060/804,
8060/270, 8060/272,
8060/157 + 8060/255
d-lab.2plus:
8060/261
8060/813, 8060/814
8060/271, 8060/273
8060/158 + 8060/255
netlab.2plus:
8060/505

Modification History
Version Edition Modifications
04092_00 2004-10-01 Combination of the Operation Manual – Operation
for the machines d-lab.2, d-lab.2plus, and
netlab.2plus;
Update to Software Version 8.0
04092_01 2005_05_01 Update to Software Version 8.5
© 2005 AgfaPhoto GmbH. Alle Rechte vorbehalten.
No part of these instructions may be reproduced, copied, or transmitted in any
form or by any means without prior written permission by AgfaPhoto GmbH.
AgfaPhoto is used under license of Agfa-Gevaert AG

d-lab.2, d-lab.2plus, netlab.2plus: Operation Contents
AgfaPhoto 2005-05-01 / PN 04092_01 0-i
Contents
1Introduction........................................................................................................................1-i
1.1 Applied Standards and Rules....................................................................................................................................1-1
1.2 Explanations for the Operation and Service Manual .......................................................................................1-2
1.2.1 Available Documentation.......................................................................................................................1-2
1.2.2 Guideline for the User..............................................................................................................................1-3
1.2.3 Conventions.................................................................................................................................................1-4
1.2.3.1 Pictographs......................................................................................................................................1-4
1.2.3.2 Text styles ........................................................................................................................................1-4
1.2.3.3 Safety notes.....................................................................................................................................1-5
1.3 Legal Situation ...............................................................................................................................................................1-6
1.3.1 Manufacturer Information......................................................................................................................1-6
1.3.2 Copyright ......................................................................................................................................................1-6
1.3.3 Warranty........................................................................................................................................................1-7
1.3.3.1 Liability of the Owner ..................................................................................................................1-7
1.3.3.2 Warranty and Liability .................................................................................................................1-7
1.3.3.3 Exclusion of Liability ....................................................................................................................1-8
1.3.4 Appropriate Use..........................................................................................................................................1-8
1.3.5 Inappropriate Use ......................................................................................................................................1-8
1.4 Consumables and Spare Parts..................................................................................................................................1-9
1.5 Hotline...............................................................................................................................................................................1-9
1.6 Safety Notes and Rules............................................................................................................................................1-10
1.6.1 General .......................................................................................................................................................1-10
1.6.2 In Operation..............................................................................................................................................1-11
1.6.3 Handling of Chemicals .........................................................................................................................1-11
1.6.4 Service / Repair Routines ...................................................................................................................1-12
1.6.5 Disposal of the Machine......................................................................................................................1-12
1.6.6 Warnings and Information Labels on the Machine ...................................................................1-13
1.7 Transport, Installation, First Operation ..............................................................................................................1-22
1.8 Storage...........................................................................................................................................................................1-22
1.8.1 Chemicals..................................................................................................................................................1-22
1.8.2 Photographic Paper ...............................................................................................................................1-22
2General Description, Work Routines and Operation ..............................................................2-i
2.1 General Description......................................................................................................................................................2-1
2.2 Product Description......................................................................................................................................................2-7
2.2.1 Corresponding Film Types and Images .............................................................................................2-7
2.2.2 Image Editing..............................................................................................................................................2-7
2.3 Operation Routines.......................................................................................................................................................2-8
2.3.1 Drive Bay
Applies only to d-lab.2plus, netlab.2plus................................................................................................2-8
2.3.2 Scanner
Applies only to d-lab.2/2plus ....................................................................................................................2-9
2.3.3 Main computer ........................................................................................................................................2-10
2.3.4 Printer .........................................................................................................................................................2-11
2.3.5 Paper Processor.......................................................................................................................................2-12
2.3.6 Sorter...........................................................................................................................................................2-13
2.3.7 Densitometer ...........................................................................................................................................2-14
2.4 Controls on the Minilab...........................................................................................................................................2-15
2.4.1 Keys and Pilot Lamps............................................................................................................................2-15
2.4.2 Touchscreen Monitor ............................................................................................................................2-16

Contents d-lab.2, d-lab.2plus, netlab.2plus: Operation
0-ii 2005-05-01 / PN 04092_01 AgfaPhoto
2.4.3 Main Breaker and Ground Fault Interrupter................................................................................. 2-17
2.5 Switching the Machine On and Off..................................................................................................................... 2-18
2.5.1 Preparations Prior to Switch-on........................................................................................................ 2-18
2.5.2 Automatic Switch-On (Timer) ............................................................................................................ 2-18
2.5.3 Switching On with the ON Key ......................................................................................................... 2-19
2.5.4 Switching the Machine On and Off with the Main Breaker................................................... 2-20
2.5.5 System Start............................................................................................................................................. 2-22
2.5.6 User Login ................................................................................................................................................. 2-22
2.5.7 The Start Screen...................................................................................................................................... 2-23
2.5.8 Log-in of Another User ......................................................................................................................... 2-24
2.5.9 End of Work and Shutdown................................................................................................................ 2-24
2.5.9.1 Sleep Mode...................................................................................................................................2-25
2.5.9.2 Switching the Machine Off .....................................................................................................2-25
2.6 Screen Layout and Controls on the Screen...................................................................................................... 2-27
2.6.1 Information Area..................................................................................................................................... 2-28
2.6.2 Buttons....................................................................................................................................................... 2-30
2.6.3 Pulldown Menus..................................................................................................................................... 2-31
2.6.4 Popup Windows ...................................................................................................................................... 2-32
2.6.5 Input Screens........................................................................................................................................... 2-34
2.6.5.1 Entering Text ................................................................................................................................2-34
2.6.5.2 Entering Numbers.......................................................................................................................2-35
2.6.6 Reorder Keyboard
Applies only to d-lab.2/2plus................................................................................................................. 2-36
2.7 Main Menus ................................................................................................................................................................. 2-38
2.8 Calling Up Info............................................................................................................................................................ 2-43
2.8.1 Film Drive Info
Applies only to d-lab.2/2plus................................................................................................................. 2-45
2.8.2 Printer Info................................................................................................................................................ 2-46
2.8.3 Paper Processor Info ............................................................................................................................. 2-47
2.8.4 Order Info .................................................................................................................................................. 2-48
2.8.5 Version Info .............................................................................................................................................. 2-49
2.8.6 Displaying the Error List....................................................................................................................... 2-50
2.9 Activating Help ........................................................................................................................................................... 2-51
2.10 Ejecting the ZIP .......................................................................................................................................................... 2-53
3Changing Chemicals............................................................................................................ 3-i
3.1 Safety Information........................................................................................................................................................3-1
3.2 Chemical Sets ................................................................................................................................................................3-3
3.3 Changing Chemical Solutions (MSC/d-lab Chemicals) .................................................................................3-4
3.4 Mixing Replenisher Chemicals (d-lab.2 Easy Paper Box)............................................................................ 3-10
3.5 Settings and Tests for the Chemicals................................................................................................................. 3-11
4Settings and Configurations ................................................................................................ 4-i
4.1 Overview...........................................................................................................................................................................4-1
4.2 Defining the User Interface, Defining Users, Assigning Rights...................................................................4-5
4.2.1 Defining the User Interface ...................................................................................................................4-5
4.2.2 Defining Users and User Rights ...........................................................................................................4-6
4.2.2.1 Defining a New User ................................................................................................................... 4-7
4.2.2.2 Changing the Settings for an Existing User........................................................................ 4-9
4.2.2.3 Overview: Rights, which can be Assigned to a User......................................................4-10
4.2.2.4 Defining a User as Standard User.........................................................................................4-11
4.2.2.5 Changing the User .....................................................................................................................4-11
4.2.3 Deleting a User ....................................................................................................................................... 4-11
4.3 Defining Paper Width, Surfaces and Cut Lengths ......................................................................................... 4-12
4.3.1 Defining Paper Widths ......................................................................................................................... 4-12

d-lab.2, d-lab.2plus, netlab.2plus: Operation Contents
AgfaPhoto 2005-05-01 / PN 04092_01 0-iii
4.3.2 Deleting Paper Widths .........................................................................................................................4-14
4.3.3 Defining Paper Surfaces.......................................................................................................................4-14
4.3.4 Renaming Surfaces ................................................................................................................................4-16
4.3.5 Deleting Surfaces ...................................................................................................................................4-16
4.3.6 Paper Codes according to AgfaPhoto Standard ..........................................................................4-17
4.3.7 Defining Cut Lengths ............................................................................................................................4-18
4.3.8 Overview: Print Sizes ............................................................................................................................4-19
4.3.9 Deleting Cut Lengths............................................................................................................................4-20
4.4 Entering Machine Settings .....................................................................................................................................4-21
4.4.1 Setting Date and Time..........................................................................................................................4-22
4.4.2 Setting the Timer: Start and Shutdown..........................................................................................4-23
4.4.3 Defining the Standard User ................................................................................................................4-26
4.4.4 Installing / Activating Software .......................................................................................................4-27
4.4.4.1 Activating Software ...................................................................................................................4-27
4.4.4.2 Installing Software from CD...................................................................................................4-29
4.4.5 Printer Settings .......................................................................................................................................4-30
4.4.6 Scanner Settings (Scratch Correction, Scanning Crop)
Applies only to d-lab.2/2plus .................................................................................................................4-32
4.4.7 Paper Processor Settings.....................................................................................................................4-34
4.4.7.1 Setting the Replenishment Rates........................................................................................4-34
4.4.7.2 Setting the Temperatures and Calibrating the Sensors ...............................................4-36
4.4.7.3 Calibrating the Water Pumps ................................................................................................4-38
4.4.8 Other Settings..........................................................................................................................................4-43
4.4.8.1 General settings..........................................................................................................................4-44
4.4.8.2 Settings for negative printing
(only for d-lab.2/2plus)............................................................................................................4-45
4.4.8.3 Settings for digital orders........................................................................................................4-46
4.4.8.4 The dTFS function (digital Total Film Scanning: Image enhancement
in digital print files)...................................................................................................................4-47
4.4.8.5 Autosave settings.......................................................................................................................4-49
4.5 Adjusting the Production Balance.......................................................................................................................4-50
4.5.1 General Information Regarding the Production Balance........................................................4-53
4.5.2 Setting the Correction Impact (for Color Negatives and Digital).........................................4-54
4.5.3 Setting Sharpness - Edges (for Color Negatives and Digital) ................................................4-55
4.5.4 Setting the Saturation (for Color Negatives and Digital) ........................................................4-56
4.5.5 Setting Sharpness - Grain (for Color Negatives and Digital)..................................................4-57
4.5.6 Area Contrast (for Color Negatives and Digital)..........................................................................4-58
4.5.7 Setting Detail Contrast (for Color Negatives and Digital).......................................................4-59
4.5.8 Brightness correction (for color negatives and digital)............................................................4-60
4.5.9 Setting Color and Density Corrections (Digital) .........................................................................4-61
4.5.10 Activating / Deactivating the Contrast Management (only for Color Negative)
Applies only to d-lab.2/2plus .................................................................................................................4-61
4.5.11 Red-eye correction (for color negatives and digital).................................................................4-61
4.5.12 Using TFS (only for Color Negatives)
Applies only to d-lab.2/2plus .................................................................................................................4-63
4.5.13 Panorama Identification (only for Color Negatives)
Applies only to d-lab.2/2plus .................................................................................................................4-65
4.5.14 Color / Density Logic (TFS; only for Color Negative)
Applies only to d-lab.2/2plus .................................................................................................................4-65
4.5.15 Setting TFS Color (only for Color Negatives)
Applies only to d-lab.2/2plus .................................................................................................................4-66
4.5.15.1 Dominant Parameters...............................................................................................................4-66
4.5.15.2 Parameters for Artificial Light Detection...........................................................................4-68
4.5.15.3 Parameter for Shift Correction...............................................................................................4-70

Contents d-lab.2, d-lab.2plus, netlab.2plus: Operation
0-iv 2005-05-01 / PN 04092_01 AgfaPhoto
4.5.16 Setting TFS Density (only for Color Negatives)
Applies only to d-lab.2/2plus................................................................................................................. 4-71
4.5.17 Setting the Selector Logic (only for Color Negatives)
Applies only to d-lab.2/2plus................................................................................................................. 4-73
4.5.18 Setting Color and DX Corrections (for Color Negatives)
Applies only to d-lab.2/2plus................................................................................................................. 4-75
4.5.18.1 Color Corrections........................................................................................................................4-75
4.5.18.2 DX Corrections ............................................................................................................................4-76
4.6 Settings for Network Orders .................................................................................................................................. 4-78
4.6.1 Settings for Remote Orders: File Print ........................................................................................... 4-79
4.6.2 Settings for Remote Orders: Autosave ........................................................................................... 4-80
4.6.3 Settings for Network Orders............................................................................................................... 4-81
4.6.4 Settings for d-workflow........................................................................................................................ 4-82
4.7 Defining and Editing Print Configurations ....................................................................................................... 4-84
4.7.1 Defining and Editing Paper Configurations.................................................................................. 4-85
4.7.2 Defining and Editing the Backprint Configurations .................................................................. 4-87
4.7.3 Indexprint Configurations.................................................................................................................... 4-93
4.7.3.1 Importing Indexprint Layouts.................................................................................................4-93
4.7.3.2 Defining and Editing a Indexprint Configuration:...........................................................4-94
4.7.4 Defining and Editing Correction Configurations ........................................................................ 4-97
4.7.5 Defining and Editing Autosave Configurations.........................................................................4-100
4.7.6 Defining and Editing a Front Print Configuration ....................................................................4-104
4.7.7 Combiprint Configurations ...............................................................................................................4-106
4.7.7.1 Importing Combiprint Layouts............................................................................................ 4-106
4.7.7.2 Defining and Editing a Combiprint Configurations:.................................................... 4-107
4.8 Defining and Editing Order Configurations....................................................................................................4-109
4.8.1 Defining and Editing Order Configurations of the Single Type...........................................4-112
4.8.1.1 Film Mask: 135, 120, 110
Applies only to d-lab.2/2plus ............................................................................................. 4-112
4.8.1.2 Film Mask: File Print............................................................................................................... 4-113
4.8.1.3 Film Mask: IX240
Applies only to d-lab.2/2plus ............................................................................................. 4-115
4.8.1.4 Film Mask: Slide
Applies only to d-lab.2/2plus ............................................................................................. 4-117
4.8.2 Defining and Editing Order Configurations of the Package Type ......................................4-118
4.8.3 Defining and Editing Order Configurations of the Combiprint Type.................................4-120
4.8.3.1 Film Mask: 135, 120, 110
Applies only to d-lab.2/2plus ............................................................................................. 4-120
4.8.3.2 Film Mask: IX240, Slide
Applies only to d-lab.2/2plus ............................................................................................. 4-121
4.8.3.3 Film Mask: File Print............................................................................................................... 4-122
4.8.4 Defining and Editing Order Configurations of the Reproduction Type ............................4-123
4.8.5 Defining a Configuration as Standard Configuration..............................................................4-125
4.9 Deleting a Print or Order Configuration..........................................................................................................4-127
4.10 Pricing Configurations............................................................................................................................................4-128
4.11 Save and Load Settings and Configurations..................................................................................................4-129
5Tests .................................................................................................................................. 5-i
5.1 Overview...........................................................................................................................................................................5-1
5.2 Printer Tests:Paper Balance Test (PBL) and Master Balance Test (MBL)..................................................5-2
5.2.1 Conditions for Printing an MBL and PBL..........................................................................................5-3
5.2.2 Initial PBL and MBL after the Machine Installation.....................................................................5-4
5.2.3 Daily Calibration with the MBL............................................................................................................5-5
5.2.4 Daily Calibration without MBL (Exception) .....................................................................................5-6

d-lab.2, d-lab.2plus, netlab.2plus: Operation Contents
AgfaPhoto 2005-05-01 / PN 04092_01 0-v
5.2.5 Calibration of a New Paper Configuration in Case of Emulsion Changes
or Changes in a Paper Configuration (not Master Paper)...........................................................5-6
5.2.6 Calibrating a New Paper Configuration or Changing the Emulsion
(Master Paper).............................................................................................................................................5-7
5.2.7 Complete New Calibration.....................................................................................................................5-8
5.3 Printing a PBL Test .......................................................................................................................................................5-9
5.3.1 General Procedure.....................................................................................................................................5-9
5.3.2 PBL Test with Laser Point....................................................................................................................5-11
5.3.3 Copying Laser Points during Calibration of a Paper Configuration.....................................5-12
5.3.4 Default Setting of Maximum Densities and Calibration Factors..........................................5-14
5.3.5 When Should Maximum Densities Be Changed? .......................................................................5-15
5.3.6 Changing the Maximum Densities of a Paper.............................................................................5-16
5.3.7 Changing the Gray Balance of the Internal Densitometer.....................................................5-19
5.4 Printing an MBL Test.................................................................................................................................................5-20
5.5 Calibrating the Scanner (Pixel Correction, PIKO)
Applies only to d-lab.2/2plus.....................................................................................................................................5-21
5.6 Checking the Process (Chemical control strip test)......................................................................................5-23
6Production..........................................................................................................................6-i
6.1 Order Handling – Overview.......................................................................................................................................6-1
6.1.1 Preparations Before Production Start ................................................................................................6-1
6.1.2 Print Modes..................................................................................................................................................6-2
6.1.2.1 Print modes and Possible Film and File Formats ..............................................................6-2
6.1.2.2 Printing without or with Preview.............................................................................................6-4
6.1.2.3 Order Configurations....................................................................................................................6-5
6.1.2.4 Changing to another print mode.............................................................................................6-5
6.1.3 Order Handling ...........................................................................................................................................6-6
6.1.4 Order Tracing............................................................................................................................................6-10
6.1.5 Changing the Order Number..............................................................................................................6-10
6.1.6 Select or Change Configuration........................................................................................................6-11
6.1.6.1 Configuration Types for Print Orders...................................................................................6-11
6.1.6.2 Display of the Current Configuration..................................................................................6-12
6.1.6.3 Changing the Configuration for the Complete Order....................................................6-16
6.1.6.4 Changing the Configuration for Individual Images of an Order
Applies only to d-lab.2/2plus................................................................................................6-17
6.1.6.5 Selecting Another Configuration for the Complete Order...........................................6-18
6.1.6.6 Selecting Another Configuration for Individual Images of an Order
Applies only to d-lab.2/2plus................................................................................................6-18
6.1.7 Inserting Films and Slides
Applies only to d-lab.2/2plus .................................................................................................................6-19
6.1.8 End of Order (Automatic / Manual).................................................................................................6-20
6.1.9 Special Print Products and Motif Groups ......................................................................................6-21
6.1.9.1 Black and White Prints.............................................................................................................6-21
6.1.9.2 Sepia Prints and Prints with Color Cast.............................................................................6-23
6.1.9.3 Reorder
Applies only to d-lab.2/2plus of Black/White Films / Films Without
Extended DX Code.....................................................................................................................6-23
6.1.9.4 Portraits..........................................................................................................................................6-24
6.1.9.5 Border Prints ................................................................................................................................6-24
6.2 Preparing the Machine for Different Orders.....................................................................................................6-26
6.2.1 Changing the Paper Magazine and Loading Paper ...................................................................6-26
6.2.1.1 Removing the Paper Magazine.............................................................................................6-27
6.2.1.2 Removing the Paper..................................................................................................................6-27
6.2.1.3 Adjusting the Paper Widths....................................................................................................6-28
6.2.1.4 Loading Paper into the Magazine........................................................................................6-29

Contents d-lab.2, d-lab.2plus, netlab.2plus: Operation
0-vi 2005-05-01 / PN 04092_01 AgfaPhoto
6.2.1.5 Coding the Paper Magazine ...................................................................................................6-30
6.2.1.6 Inserting a Paper Magazine....................................................................................................6-30
6.2.2 Changing the Mirror Box
Applies only to d-lab.2/2plus................................................................................................................. 6-31
6.2.3 Changing the Film Carrier
Applies only to d-lab.2/2plus................................................................................................................. 6-32
6.3 Printing .......................................................................................................................................................................... 6-33
6.3.1 Working with the Autoprint Mode
Applies only to d-lab.2/2plus................................................................................................................. 6-33
6.3.1.1 Activating the Print Mode and Selecting a Configuration ..........................................6-33
6.3.1.2 Autoprint without Preview ......................................................................................................6-34
6.3.1.3 Autoprint with Preview.............................................................................................................6-35
6.3.2 Working with Reorder Mode
Applies only to d-lab.2/2plus................................................................................................................. 6-40
6.3.2.1 Activating the Print Mode and Editing a Reorder List ..................................................6-40
6.3.2.2 Reorder without Preview .........................................................................................................6-44
6.3.2.3 Reorder with Preview................................................................................................................6-46
6.3.3 Working with Manual Positioning Mode
Applies only to d-lab.2/2plus................................................................................................................. 6-50
6.3.3.1 Activating the Print Mode.......................................................................................................6-51
6.3.3.2 Image Editing and Printing.....................................................................................................6-52
6.3.4 Working with File Print Mode ........................................................................................................... 6-55
6.3.4.1 General Information ..................................................................................................................6-55
6.3.4.2 Using dTFS: Automatic Color and Density Corrections.................................................6-57
6.3.4.3 Load Image Files from Storage Media................................................................................6-58
6.3.4.4 Saving Digital Orders ................................................................................................................6-61
6.3.4.5 Loading a Saved Digital Order...............................................................................................6-62
6.3.4.6 Delete the Saved Digital Order .............................................................................................6-64
6.3.4.7 Printing File Prints without Preview....................................................................................6-65
6.3.4.8 Printing File Prints with Preview ..........................................................................................6-67
6.3.5 Working with Slide Print Mode
Applies only to d-lab.2/2plus................................................................................................................. 6-72
6.3.5.1 Activating the Print Mode.......................................................................................................6-72
6.3.5.2 Image Editing and Printing.....................................................................................................6-74
6.3.6 Working with the Slide Film Print Mode
Applies only to d-lab.2/2plus................................................................................................................. 6-76
6.3.6.1 Activating the Print Mode.......................................................................................................6-76
6.3.6.2 Image Editing and Printing.....................................................................................................6-77
6.4 The Functions Image Editing and Special ........................................................................................................ 6-80
6.4.1 Image Editing........................................................................................................................................... 6-81
6.4.1.1 Activation ......................................................................................................................................6-81
6.4.1.2 Making Color and Density Corrections...............................................................................6-82
6.4.1.3 Cropping ........................................................................................................................................6-83
6.4.1.4 Image Improvement..................................................................................................................6-84
6.4.2 Special........................................................................................................................................................ 6-85
6.4.2.1 Enter and Format Text for the Exposure .............................................................................6-86
6.4.2.2 Setting a Border..........................................................................................................................6-88
6.4.3 Saving an Image as File....................................................................................................................... 6-89
6.5 Manual red eyes correction ................................................................................................................................... 6-91
6.6 Index prints................................................................................................................................................................... 6-95
6.6.1 Index Prints in the Different Print Modes..................................................................................... 6-96
6.6.2 Sequence and Designations of the Thumbnails......................................................................... 6-97
6.6.3 Quantity, Size, and Aspect Ratio of the Thumbnails ................................................................ 6-97
6.6.4 Print Index Print Only ........................................................................................................................... 6-98

d-lab.2, d-lab.2plus, netlab.2plus: Operation Contents
AgfaPhoto 2005-05-01 / PN 04092_01 0-vii
6.7 Saving Images with Autosave ...............................................................................................................................6-99
6.7.1 Printing and Saving Images ............................................................................................................ 6-100
6.7.2 Save Images Only, Without Printing............................................................................................ 6-101
6.8 Network Orders ........................................................................................................................................................ 6-102
6.8.1 The Minilab in a Network................................................................................................................. 6-102
6.8.2 Manual Start of Network Orders.................................................................................................... 6-104
6.8.3 Automatic Start of Network Orders .............................................................................................. 6-105
6.8.4 Deleting Network Orders.................................................................................................................. 6-106
6.9 Printing Price Labels (Option) ........................................................................................................................... 6-107
6.10 Saving and Displaying Statistics....................................................................................................................... 6-108
6.10.1 Displaying Statistics........................................................................................................................... 6-108
6.10.2 Saving Statistics................................................................................................................................... 6-109
6.11 Clickrate (Option) .................................................................................................................................................... 6-110
7Troubleshooting..................................................................................................................7-i
7.1 Avoiding Problems........................................................................................................................................................7-1
7.2 Display of Error Messages..........................................................................................................................................7-2
7.3 Activating Help for Error Messages ........................................................................................................................7-3
7.4 Problems During Scanning
Applies only to d-lab.2/2plus........................................................................................................................................7-3
7.5 The Machine Fails to React to Operator Inputs.................................................................................................7-4
7.5.1 Resetting the Machine with the Stop Button................................................................................7-5
7.5.2 Resetting the Machine with the ON key..........................................................................................7-6
7.6 Procedure if an Error Occurs .....................................................................................................................................7-8
7.6.1 General Procedure.....................................................................................................................................7-8
7.6.2 Procedure for Unsolved Errors ..............................................................................................................7-8
7.6.3 Screen Remains Gray for More Than 3 Minutes after Reset.....................................................7-9
7.6.4 Image Processing Errors.......................................................................................................................7-10
7.6.5 Paper Processor and Printer Errors...................................................................................................7-11
7.6.6 Printer Errors.............................................................................................................................................7-12
7.6.7 Other Errors...............................................................................................................................................7-12
7.7 Removing a Paper Jam
Applies to d-lab.2 ..........................................................................................................................................................7-13
7.7.1 General procedure..................................................................................................................................7-13
7.7.2 Paper Jam in the Printer ......................................................................................................................7-15
7.7.3 Paper Jam in the Transport Unit (TU) ..............................................................................................7-16
7.7.4 Paper Jam in the Transfer Positions Transport Unit (TU) and Print Engine (PE)..............7-20
7.7.5 Paper Jam in the Print Engine (PE) ..................................................................................................7-21
7.7.6 Paper Jam between Transport Unit (TU) and
Lane Distributor (LD)..............................................................................................................................7-23
7.7.7 Paper Jam in the Lane Distributor (LD) ..........................................................................................7-24
7.7.8 Paper Jam between Lane Distributor (LD) and
Sheet Transfer (ST)..................................................................................................................................7-25
7.7.9 Paper Jam in the Paper Processor....................................................................................................7-26
7.7.10 Paper jam between dryer and paper outlet..................................................................................7-27
7.8 Removing a Paper Jam
Applies to d-lab.2plus/netlab.2plus..........................................................................................................................7-28
7.8.1 General procedure..................................................................................................................................7-28
7.8.2 Paper Jam in the Printer ......................................................................................................................7-30
7.8.3 Paper Jam in the Feeder Unit FU......................................................................................................7-31
7.8.4 Paper Jam in the Transfer Positions between Feeder Unit FU and Print
Machine PM..............................................................................................................................................7-35
7.8.5 Paper Jam in the Print Machine PM ...............................................................................................7-36

Contents d-lab.2, d-lab.2plus, netlab.2plus: Operation
0-viii 2005-05-01 / PN 04092_01 AgfaPhoto
7.8.6 Paper Jam between the Feeder Unit FU and Sheet Distributor SD..................................... 7-38
7.8.7 Paper Jam in the Sheet Distributor SD ..........................................................................................7-39
7.8.8 Paper Jam between Sheet Distributor SD and Sheet Transfer ST........................................ 7-40
7.8.9 Paper Jam in the Paper Processor ................................................................................................... 7-41
7.8.10 Paper Jam between dryer and outlet unit .................................................................................... 7-42
8Maintenance ...................................................................................................................... 8-i
8.1 Safety Instructions........................................................................................................................................................8-1
8.2 Maintenance Routines – Schedule and Overview...........................................................................................8-2
8.3 Daily Maintenance .......................................................................................................................................................8-8
8.3.1 Cleaning the APS Film Carrier
Applies only to d-lab.2/2plus....................................................................................................................8-8
8.3.2 Cleaning the Drive Rollers in the Film Carrier
Applies only to d-lab.2/2plus................................................................................................................. 8-10
8.3.2.1 In the Running Machine..........................................................................................................8-10
8.3.2.2 When the Machine is Off.........................................................................................................8-10
8.3.3 Cleaning the Film Brushes
Applies only to d-lab.2/2plus................................................................................................................. 8-11
8.3.4 Running a Process Check in the Paper Processor ..................................................................... 8-11
8.4 Weekly Maintenance Routines............................................................................................................................. 8-12
8.4.1 Cleaning the Film Carrier
Applies only to d-lab.2/2plus................................................................................................................. 8-12
8.4.2 Cleaning the Film Takeup
Applies only to d-lab.2/2plus................................................................................................................. 8-12
8.4.3 Cleaning the Film Chute
Applies only to d-lab.2/2plus................................................................................................................. 8-13
8.4.4 Remove Paper Dust
Applies to d-lab.2 ...................................................................................................................................... 8-14
8.4.4.1 Transport Unit (TU) .....................................................................................................................8-14
8.4.4.2 Single sheet buffer (SR) and sheet bridge (SB)................................................................8-15
8.4.4.3 Print engine (PE): Remove Paper Dust ...............................................................................8-16
8.4.4.4 Lane distributor (LD): Remove Paper Dust and Deposits.............................................8-19
8.4.4.5 Sheet Transfer (ST)......................................................................................................................8-20
8.4.5 Remove Paper Dust
Applies to d-lab.2plus and netlab.2plus............................................................................................... 8-21
8.4.5.1 Feeder Unit (FU) ..........................................................................................................................8-21
8.4.5.2 Sheet Stocker (SR) and Sheet Bridge (SB).........................................................................8-23
8.4.5.3 Print Machine (PM)....................................................................................................................8-24
8.4.5.4 Sheet Distributor (SD): Remove Paper Dust and Deposits..........................................8-27
8.4.5.5 Sheet Transfer (ST)......................................................................................................................8-28
8.4.6 Paper Processor: Cleaning the CD Feed Unit, Tank Crossovers, and the
Squeegee Unit......................................................................................................................................... 8-29
8.4.7 Checking the Solution Levels............................................................................................................ 8-33
8.4.8 Cleaning the Chemical Filters........................................................................................................... 8-34
8.4.9 Cleaning the Filters in the ASTOR and Water Inlets................................................................. 8-35
8.4.10 Cleaning the Densitometer Calibration Plate............................................................................. 8-36
8.4.11 Lane shifter (LS): Cleaning the transport belt.............................................................................. 8-38
8.5 Monthly Maintenance Routines........................................................................................................................... 8-39
8.5.1 Cleaning the Exposure Filters
Applies only to d-lab.2/2plus................................................................................................................. 8-39
8.5.2 Checking and Calibrating the Solution Temperatures............................................................. 8-41
8.5.3 Cleaning or Replacing the Air Filters.............................................................................................. 8-41
8.5.4 Replacing the Scanner Lamp and Resetting the Operation Counter
Applies only to d-lab.2/2plus................................................................................................................. 8-45
8.5.5 Replacing the Chemical Filters......................................................................................................... 8-47