Notices
© Agilent Technologies, Inc. 2004, 2005
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consentfrom Agi-
lent Technologies, Inc. as governed by
United Statesand international copyright
laws.
Manual Part Number
34980-90001
Edition
Third edition, July 2005
Printed in Malaysia
AgilentTechnologies, Inc.
815 14th Street SW
Loveland, CO 80537 USA
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject tobeing changed, without notice,
in future editions. Further,to the max-
imum extentpermitted by applicable
law, Agilent disclaims all warranties,
either express orimplied,withregard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequentialdamagesinconnection
with the furnishing, use, or perfor-
mance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
Thehardwareand/orsoftwaredescribedin
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of
a U.S. Government prime contract or sub-
contract,Software is delivered and
licensedas “Commercial computer soft-
ware”as defined in DFAR252.227-7014
(June 1995), or as a “commercial item” as
defined in FAR 2.101(a) or as “Restricted
computer software”as defined in FAR
52.227-19 (June 1987) or any equivalent
agency regulation or contractclause. Use,
duplication ordisclosure of Software is
subject to Agilent Technologies’ standard
commercial license terms, and non-DOD
Departments and Agenciesof the U.S. Gov-
ernment will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Govern-
mentusers willreceive no greater than
Limited Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any
technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctlyperformed or
adhered to,could result in damage
to the product or loss of important
data. Do not proceedbeyond a
CAUTION noticeuntiltheindicated
conditions arefully understoodand
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adheredto, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and met.
i
