Agilight LB-FRN-RGBW65-2-A User manual

Page 1AgiLight is a quality division of GENLED Brands™ | www.AgiLight.com |AgiLight | Innovative Signage Lighting
Input Voltage 24 V DC
Power Consumption 5.5 W/ft (18.04 W/m)
Color RGB+6500K (special orders for
RGB+5000K and RGB+4000K)
Cuttable Length 3.28 in. (83.3 mm)
Max. Length 16.4 ft (5 m)
Available Lengths
2 ft (0.61 m)
8 ft (2.44 m)
16.4 ft (5 m)
Min. Bending Diameter 2 in. (50 mm)
Ingress Protection IP67
Impact Protection Rating IK08
L70 Lifetime @ 60° C 50,000 Hours
Warranty 5 Year Limited Warranty
SPECIFICATIONS LUMINOUS INTENSITY DISTRIBUTION
Applications:
• Borders and edges in signs and facades
• Neon replacements
• Cove and Accent lighting
Features:
• Available in pre-assembled 2 ft (0.61 m) or 8 ft (2.44 m) lengths or
sold in full reels of 16.4 ft (5 m)
• Full reels can be cut and nished with an end cap; new power
feeds cannot be introduced in the eld
• 5.5 W/ft (18.04 W/m), 24 V DC
• RGB+6500K (4000K, 5000K upon request)
• 3.28 in. (83.3 mm) cut lengths
REV.21DEC2022
RGBW FLEXRAYZ NEON
FlexRayz Neon from AgiLight offers a versatile approach to border
tube that eliminates light gaps. A side-bending LED neon that
provides an excellent solution for linear façade lighting in curved or
straight runs, RGBW FlexRayz lets you tune your light to any of 16
million custom colors. Rated IP67 for use in damp and wet locations.
FlexRayz products are designed to bend; use Aluminum Mounting
Channel for straight run applications.
RoHS LM-80 IP67
Average Beam Angle (50%): 182.2°
Unit: cd
C0/180, 247.8°
C90/270, 116.5°
• 110x250° beam angle
• Use Aluminum Mounting Channel for straight runs
• Use S-type Track or Aluminum Mounting Clips for curves
Saltwater, solvent, and ame resistant
• IP67 ; IK08 impact protection
• Consistent brightness with constant current design
• Minimum bend diameter of 2 in. (50 mm)
RGBW
Color Changing
ORDERING GUIDE
Part Number Length Color
Lumens
All LEDs On Red Green Blue White
LB-FRN-RGBW65-2-A 2 ft / 0.61 m
RGB+6500K 55 lm/ft
(180.4 lm/m)
7 lm/ft
(23 lm/m)
19 lm/ft
(62.3 lm/m)
3 lm/ft
(9.8 lm/m)
25 lm/ft
(82 lm/m)
LB-FRN-RGBW65-8-A 8 ft / 2.44 m
LB-FRN-RGBW65-16-A 16 ft 4 in. / 5 m
LB-FRN-RGBW50-2-A*2 ft / 0.61 m
RGB+5000K 55 lm/ft
(180.4 lm/m)
7 lm/ft
(23 lm/m)
19 lm/ft
(62.3 lm/m)
3 lm/ft
(9.8 lm/m)
25 lm/ft
(82 lm/m)
LB-FRN-RGBW50-8-A*8 ft / 2.44 m
LB-FRN-RGBW50-16-A*16 ft 4 in. / 5 m
LB-FRN-RGBW40-2-A*2 ft / 0.61 m
RGB+4000K 55 lm/ft
(180.4 lm/m)
7 lm/ft
(23 lm/m)
19 lm/ft
(62.3 lm/m)
3 lm/ft
(9.8 lm/m)
25 lm/ft
(82 lm/m)
LB-FRN-RGBW40-8-A*8 ft / 2.44 m
LB-FRN-RGBW40-16-A*16 ft 4 in. / 5 m
*Special order only
RGBW FLEXRAYZ NEON
LB-FRN-RGBW65-A

Page 2AgiLight is a quality division of GENLED Brands™ | www.AgiLight.com |AgiLight | Innovative Signage Lighting
RGBW FLEXRAYZ NEON
LB-FRN-RGBW65-A
Minimum Bending Diameter Bending Direction
2 in. (50 mm)
ACCESSORIES
DIMENSIONS
FlexRayz Neon Front Bottom Feed End Cap Closing End Cap (part #: LB-FRN-CAP)
0.39 in.
10 mm
0.98 in.
25 mm
1.52 in.
38.5 mm
1.1 in.
28 mm 1.32 in.
33.6 mm 0.67 in.
17 mm
1.24 in.
31.5 mm
Length 2 ft (0.61 m), 8 ft (2.44 m), and 16.4 ft (5 m) 1.52 in. (38.5 mm) 0.63 in. (16 mm)
Width 0.39 in. (10 mm) 0.52 in. (13.2 mm) 0.67 in. (17 mm)
Height 0.98 in. (25 mm) 1.32 in. (33.6 mm) 1.24 in. (31.5 mm)
Available Lengths: 2 ft (0.61 m), 8 ft (2.44 m) and 16.4 ft (5 m)
Closing End Cap
Aluminum Mounting Clip
for mounting
in curved sections only
S-type Track
for mounting
in curved sections
Aluminum Channel
for mounting
in straight sections
0.5 in. Standoff
for mounting
above facade surface
Silicone Glue
300g/pc
Part No. LB-FRN-CAP LB-FRN-CLIPMNT LB-FRN-CRVMNT LB-FRN-CHMNT LB-FRN-STDOFF LB-FRN-SILGLUE
Length 0.63 in. (16 mm) 0.98 in. (25 mm) 19.7 in. (500 mm) 39.4 in. (1000 mm) 0.38 in. (9.5 mm) --
Width 0.67 in. (17 mm) 0.48 in. (12.3 mm) 0.43 in. (11 mm) 0.48 in. (12.3 mm) 0.38 in. (9.5 mm) --
Height 1.24 in. (31.5 mm) 0.67 in. (17 mm) 0.67 in. (17 mm) 0.67 in. (17 mm) 0.5 in. (12.7 mm) --
RGBW FlexRayz Neon if cut
Standard Length
(ft)
Actual Light Length Actual Length with End Caps Channel Cut Length
(ft) (m) (ft) (m)
(ft) (m)
Single End Feed
2 1.91 0.58 1.99 0.61 1.76 0.54
8 7.93 2.42 8 2.44 7.77 2.37
16 15.85 4.83 15.93 4.85 15.7 4.79
Double End Feed
2 1.91 0.58 2.07 0.63 1.76 0.54
8 7.93 2.42 8.08 2.46 7.77 2.37
16 15.85 4.83 16 4.88 15.7 4.79

Page 3AgiLight is a quality division of GENLED Brands™ | www.AgiLight.com |AgiLight | Innovative Signage Lighting
Pairing with RF Remote
• Complete wiring according to wiring diagrams above.
• Pair RF Interface with RF Remote: Please refer to the instructions for the RF Remote you would like to pair with.
• Reset Pairing:
1. Connect the RF Interface with power source (see wiring diagrams above).
2. Press and hold down the “Learning Key” button on the RF Interface for over 3 seconds until the connected light ashes.
Primary and replica setting
1. The RF Interface has both primary and replica functions which can be set with a jumper. Covering both pins will set the RF Interface as the primary and covering one pin will set
the RF Interface as the replica, or secondary function. Once you have set the jumper, please power off and power on the RF Interface to enable primary functions. Primary and
replica settings enable perfect synchronization of color changing effects.
2. Set one RF Interface as the primary and pair it to any zone of a remote, and this zone will only have one RF Interface which works as the primary. Set all other RF Interfaces as
replicas and pair them to other zones of the remote (multiple RF Interfaces can be paired to each zone). Then choose all zones on the remote and play the color changing effects.
The primary will send a sync signal to the replicas to achieve perfect synchronization. The maximum sync distance between the primary and any replica is within 100 feet (30 meters).
(Use of the terms primary and replica settings refer to the traditional ‘master/slave’ architecture used in the electronics industry.)
RGBW FLEXRAYZ NEON
LB-FRN-RGBW65-A
CONTROL OPTIONS
WIRELESS RF
DMX
WARNING
• DO NOT Install with power applied to device
• DO NOT expose the device to moisture
RGBW RF Remote
Part #: RFREMOTERGBW4Z
RF to WiFi Converter
(WiFi Control)
Part #: RFWIFICONVERT
whit e
1234
wwcwwwcw
V+ V-
V+
V-
OUTPU T
V+ V+
R- R-
G- G-
B- B-
W- W-
Learning Key
24V
CV PSU
RF Interface
Part #: RFINTERFACE4CH
RGBW FlexRayz Neon
FLEXRAYZ NEON WIRE COLORS
Black (+) Positive
Red Wire (-) goes to Red Channel
Green Wire (-) goes to Green Channel
Blue Wire (-) goes to Blue Channel
White Wire (-) goes to White Channel
RGBW FlexRayz Neon
AC
DMX
in
N
L
G
Red +
Black -
Pin1 :Data+
Pin2:Data-
Pin7:G ND
Pin8:GND
12345678
DMX OUTPUT
Female
DMX OUPUT
Male
DMX OUTPUT
RJ45
3
5
4
V+
V+
1/R-
2/G-
3/B-
4/W1-
5/W2-
+
D+
D-
D+
D-
GND
1
2
3
5
4
1
2
12345678
Pin1 :G ND
Pin2:D-
Pin3:D+
Pin1 :G ND
Pin2:D-
Pin3:D+
DownUpEnterBack
DMX Interface/Decoder 24V Driver