Agility Technologies ReadyTechGo User manual

ReadyTechGo
The only integrated business continuity solution in the market that helps you Plan, Train, Test, Alert, and Recover—all in one.
Copyright 2021 - Agility Recovery, All Rights Reserved.
1
ReadyTechGo User Guide
QUICK START
•Plug charger into the port next to the blue “QC PASSED” sticker.
•Wait 3 minutes for the unit to boot.
•Connect to Wi-Fi with the following credentials:
POWER
•Press and hold the power button located in the viewing window for one second to turn the unit on or off.
•The display will light up with the current charge to indicate that the unit is on.
•If the display is not displaying a number from 1-99, the unit is off.
CHARGE THE UNIT
•Locate the charting port on the side of the unit, second from the bottom.
•Pull back the dust cover and plug the included charger into the port.
•The unit automatically powers on when the charger is connected.
•The display will blink to indicate that the unit is currently charging.
•The display is the remaining battery life on a scale of 1-99.
•The unit takes approximately 5 hours to reach a full charge.
•No harm will be done to the unit by leaving the charger connected once fully charged. The display will read “FF”
when full.
CONNECT TO WI-FI
•Allow approximately 3 minutes for the unit to boot up once powered on before connecting.
•In the wireless network settings of your preferred device such as computer, smartphone, or tablet locate the
wireless network named “Agility” followed by the last 4 digits of the unit’s serial number. Ex: Agility 1234
•Type in the password located on the quickstart guide that accompanied the unit in the shipping box.
•Store the password somewhere that it will not get lost.
CHARGE YOUR DEVICES
•Pull back the dust cover from the bottom port on the side of the unit to access the 3-prong power outlet.
•This outlet can be used to power devices just like a standard home outlet.
•The outlet should only be used for devices such as laptops, smartphones, or tablets. Powering items such as
appliances or power tools could result in damage to the unit.
ReadyTechGo Support Hotline: [phone]
WI-FI CREDENTIALS
SSID: Agilityxxxx
Password: Recovery 1234*!

ReadyTechGo
The only integrated business continuity solution in the market that
helps you plan, train, test, alert, and recover — all in one.
866-364-9696
[e-mail]
www.agilityrecovery.com
Copyright 2021 - Agility Recovery
All Rights Reserved
ReadyTechGo Support Hotline: [phone]
CONNECT TO NETWORK PRINTER
•Unscrew the dust cover located second from the top and connect an
ethernet cable from your printer to the unit.
•The unit will assign an IP address to the printer.
•Follow the directions provided with the printer.
USER TIPS
•Do no lose the Wi-Fi password.
•The unit will display the remaining battery life when the unit is powered on.
•Allow at least 3 minutes for the unit to boot up. In some cases, it may take
slightly longer before the internet can be accessed.
•For faster internet speeds, try placing the unit near a window or exterior
room.
•The more devices being powered by the unit, the faster the battery will be
drained. For optimal runtime, limit use to essential devices only.
•Do not attempt to open the case. The contents are arranged to optimize
performance and can be easily damaged when outside the protection of the
case.
FREQUENTLY ASKED QUESTIONS
What is the average run time and charge time?
Charge time: 5 hours
Runtime:
- Wi-Fi + LTE: 40+ hours
- Wi-Fi + LTE + Cell Phone Charger: 35+ hours
- Wi-Fi + LTE + Laptop Charger: 16+ hours
What is the Data usage allowance for each case?
Each case receives 1GB/month with the option to add more.
Can I travel with the ReadyTechGo pack?
By road or train, yes, but due to the lithium-ion battery, ReadyTechGo is not
permitted on airplanes (checked or carry-on).
Do I get access to both network providers (AT&T and Verizon 4G)?
No, you will get access to one network provider.