AGPtek C101B1 User manual

AGPTEK
C101B1
Quick Start Guide
Pulse Oximeter

EN＞DE＞FR＞IT＞ES＞NL
01 - 09
10 - 19
20 - 30
31 - 40
41 - 50
51 - 60
English
Deutsch
Français
Italiano
Español
Nederland

Content
1.Introduction........................................1
2.How to Use Properly......................... 2
3.Customize Settings........................... 3
4.Important Notice...............................7
5.Safety Instructions.............................7
6.Procuct Classification........................7
7.Maintenance & Preservation.......... 7
8.Product Declaration..........................7
9.Problems & Solutions.......................7
10.Contact Us........................................ 9
NOTE: For the information of Part 5. 6.
7. 8. 9, please read detailed User
Manual

Introduction
Pulse Oximeters are considered
a suitable alternative, though by
no means equal to, blood gas
testing. It can be applied for
Fitness Monitoring and High
Altitude Sports. If you want to
use for disease surveillance such
as COPD Management, Asthma
Patient Care and Piece of Mind
for Pulmonary Patients, please
consult your doctor.
1

How to Use Properly
1. Press the bottom to open the
Power
Indication
Pulse
Rate
Value
SpO2
Value
Pulse
Bar Graph
Power
Button/
Setting
2

probe.
2. Insert the finger.
3. Press button to activate
the oximeter. You will need to
wait for 5 more seconds for the
pulse oximeter to stabilize its
readings.
Customize Settings
Non-professionals are advised
not to customize the settings
and use the default mode.
After power on, long press
button (＞2s) for entering
3

parameter setting interface.
And short press the button
(＜1s) for selecting parameter.
Then, just wait for the
parameter to stabilize and
confirm.
Long press button (＞2s).
It will enter parameter setting
interface. As the display as
Pic.1: You can select the SpO2
parameter from 85 to 99 for
warning.
Then, continue to long press
4

button (＞2s) to select
the PRbpm parameter from
100 to 140 for the highest
setting warning (Pic.2). At last,
long press button (＞2s)
again to select the PRbpm
parameter from 50 to 80 for
the lowest setting warning
(Pic.3).
Pic.3
Pic.2
Pic.1
5

Sound Setting. Continue to
long press ( ＞2s) button .
As the display as Pic.4 and
Pic.5,“OFF”and“ON”will
be selected to turn on or off
the buzzer.
Normal Range for Healthy
Individuals in a Quiet State:
SpO2% >94 60<PR<120
Pic.4
Pic.5
6

Display Direction Change.
When the panel shows the
readings, short press button
twice to change the
display direction. Short press
button once again to
return to the original display
direction.
Important Notice
To get the best reading possible,
7