AGPtek WBA01 User manual

HIFI Bluetooth 4.1 Receiver and Transmitter
User Manual

1、 product introduction
This product is a receive and transmit 2 in 1 Bluetooth device, send and
receive all of the audio freely and easily. Via this product, you can cast the
music in your phone to the audio equipment , more convenient is that
you can also make television, CD player, MP3 or any other audio device
sent to the speakers or headphones with Bluetooth, Since the product
use low-latency technology, it also supports online games, television,
movies, real-time voice transmission. This product built-in rechargeable
battery inside, long battery life, the perfect solution to solve the
connection problem between audio devices and mobile devices ,
expanding the function of all audio devices.
2、 Main parameter
Supported protocol : A2DP , AVRCP
Bluetooth distance : ﹥10M
Built-in battery : 600MA
Playing time : ﹥8H
Charging time : about 2H
Charging input voltage : DC 5V
Input/Output connecting mode : 3.5MM stereo audio port
Compatibility：compatible with phones and PAD of Android/IOS system,
and all Bluetooth audio devices.

3、 Accessory
Receiver and Transmitter device x1
User manual x1
USB charging cable x1
3.5MM audio connecting cable x1
One for two patch cord audio connecting cable x1
4、 Product description
Interface Schematic：
Receive Mode Audio Output Interface USB Charging Transmit Mode Audio Input Interface
Charging ,Bluetooth connection status indicator
Multi-function- -buttons
Receive status indicator
Transmit status indicator

LED lights Status：
5、 Charging Mode
This product is built-in rechargeable battery for long standby and use.
Recommended charge full power before first time use.
A, Insert the Micro USB charging cable into the product charging port,
another side into output standard USB port (such as mobile phone chargers,
PC USB interface).
A、 About 2 hours Charging time.
B、 Charging status is red light, charging is finished when red light
turns off .
C、 Play music when charging, also you can enjoy music while charging.
D、 Low battery status, the (receive / transmit) mode status indicator
flashes slowly.
6、 Function Operation.
ON: press the button 5S the blue light will blink .

OFF: press the button 5S the blue light will off .
Automatic shutdown function: the device in the absence of the
connection state, after 10 minutes, it will automatically go into power-saving
sleep mode, the light will turn off.
1） Receive Mode：
（Used for all audio interface speaker device）
Connection steps：
A、 Turn on the device, then the Bluetooth status blue
indicator lights blink rapidly.
B、 Insert the 3.5MM audio connecting cable into receive
Headphone jack(Green Headphone jack), the receive
status red indicator lights will be bright, the another cable
side insert into Home audio equipment.
C、 After connected, the Bluetooth status indicator blue light
flashes slowly.
2） Send mode
During the sending mode, with Bluetooth devices connecting
(Bluetooth headset) , you can listen to wireless music.
Connection steps：
A,,Turn on the device, then the Bluetooth status blue indicator lights

blink rapidly.
B, Insert the 3.5MM audio connecting cable into transmit
Headphone jack(Red Headphone jack), the transmit status red
indicator lights will be bright, the another cable side insert into
phone, tablet, MP3, CD player, PC, TV audio output interface (For
example ,the Headphone output interface)
A、 Short-time press the multifunction key, the blue light of the
Bluetooth connection status will fast flash then enter to search
for Bluetooth devices state. Keep this product and Bluetooth
device (such as a Bluetooth headset) placed in the 10M range.
B、 After a successful connection, Bluetooth connection status
Blue light flashing slowly. If it is not the Bluetooth device you
want, you can press the multifunction key to switch to the next
Bluetooth device (such as a Bluetooth headset).
tips：
①Different Bluetooth devices (such as Bluetooth headsets)
Because of the Programs and protocols are difference, the
search and connect time will be different.
② If the connection fails or unable to connect for a long
time, you can shut down the connection and try again.
③ This product with Bluetooth devices have switch

function, if there are many Bluetooth devices around (such as
Bluetooth headsets) , you can press the button shot time to
switch and match device.
7、 Fault diagnosis
You can try to solve problems by these ways if facing problems below.
Please connect the local distributors if you can’t solve problems these
ways, but please don’t disassemble the receiver to repair yourself , for
fear that it may cause any unnecessary problems by doing so.
Bluetooth audio adapter cannot work normally?
1. Check if the adapter is on.
2. Please insert the charger to check whether the battery has any
electricity.
3. Please turn off the adapter, and turn it on again, and then check if it
can work normally.
4. First play the music of the first bluetooth device which is paired and
connected first. Cancel the unused devices, and reset to pair other new
devices.

5, According to the indicator light to choose work mode,the default
boot mode is receive mode. if the two jack of products are inserted
headphone audio plug , the mode is also receive mode.
6、 Please check the product mode is correct, whether 3.5MM audio
cable into the headphone correct jack or not. And according to the
indicator to check the work mode.
7)If can not connected Bluetooth devices (such as Bluetooth headset),
try to closer the device, or press the switch and try again.
8) Because of Bluetooth receiver chip scheme and transport protocol
are different , there will be something wrong with connection , we will
continue optimizing the device ,thanks for supporting .