Ai Hardware AI-HT-T5-2D User manual

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
AI-HT-T5-2D Hand-held Terminal
User Manual

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
Contents
Chapter 1 Brief Instruction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1 Brief Instruction..........................................................................................2
1.2 Precaution Before Using Battery................................................................3
Chapter 2 Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.1 Appearance...............................................................................................4
2.2 Buttons......................................................................................................4
2.3 Micro SD,SIM,PSAM Card Installation......................................................5
2.4 Battery Charging.......................................................................................5
2.5 Device Power on/off..................................................................................5
Chapter 3 Call Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3.1 Phone.........................................................................................................6
3.2 Contacts.....................................................................................................6
3.3 Messaging..................................................................................................7
Chapter 4 Barcode Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Chapter 5 RFID Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.1 High Frequency.........................................................................................9
5.1.1 14443A...................................................................................................9
5.1.2 14443B...................................................................................................9
5.1.3 15693....................................................................................................10
5.2 NFC..........................................................................................................11
Chapter 6 Other Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.1 PING.........................................................................................................11
6.2 Bluetooth..................................................................................................12
6.3 GPS..........................................................................................................13
6.4 Volume Settings.......................................................................................13
6.5 Sensor......................................................................................................14
6.6 Keyboard..................................................................................................14
6.7 Network....................................................................................................14
Chapter 7 Device Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . .15
1

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
Chapter 1 Brief Instruction
1.1 Brief Instruction
AutoID AI-HT-T5 is a series of Android powered smart terminals, with data capture, data
processing, wireless communication. It is with high-reliability & high-expansibility. Auto &
Accurate data collection is achieved in various business fields via a complete solution of
premium options, the flexible solution among options and operators is suited-up. You will
find out with AI-HT-T5, much easier deployment, reduced complexity, decreased
maintenance, are the benefits for enterprises.
AI-HT-T5 meets industrial level IP65 (IEC sealing), is sufficient to routine applications, eg,
railway inspection, road parking toll, vehicle inspection, logistics express, power inspection,
warehousing management, chain retail, etc. Whether the mobile operators are working
indoor or outdoor, with AutoID AI-HT-T5, your business is always &highly efficient on-line.
Meeting industrial standards, designed to support various of mobile solutions. With the
build-in high performance Cortex-A7 1GHZ quad core processor technology, the operators
need only one device to enjoy a convenient and easy job, AI-HT-T5 will be the ideal choice
for key-fact business in mobile solutions, for simplified task flow, enhanced work efficiency,
for shortened time to customer response, more satisfied customer care service.
AutoID AI-HT-T5 comes with world wide band 4G technology. Multi channels data and
voice communication guarantees the real-time communication and data efficiency, AI-HT-T5
brings you the best ROI.
2

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
1.2 Precaution Before Using Battery
- Do not leave batteries unused for extended periods of time, either in the product or in
storage. When the battery has been unused for 6 months, check the charge status and
charge or dispose of the battery as appropriate.
- The typical estimated life of a Lithium- Ion battery is about two to three years or 300 to
500 charge cycles, whichever occurs first. One charge cycle is a period of use from fully
charged, to fully discharged, and fully recharged again. Use a two to three year life
expectancy for batteries that do not run through complete charge cycles.
- Rechargeable Lithium- Ion batteries have a limited life and will gradually lose their capacity
to hold a charge. This loss of capacity (aging) is irreversible. As the battery loses capacity,
the length of time it will power the product (run time) decreases.
- Lithium- Ion batteries continue to slowly discharge (self- discharge) when not in use or while
in storage. Routinely check the battery’s charge status. The user manual typically includes
information on how to check battery status, as well as battery charging instructions.
- Observe and note the run time that a new fully- charged battery provides for powering your
product. Use the new battery run time as a basis to compare run times for older batteries.
The run time of your battery will vary depending on the product’s configuration and the
applications that you run.
- Routinely check the battery’s charge status.
- Carefully monitor batteries that are approaching the end of their estimated life.
- Consider replacing the battery with a new one if you note either of the following conditions:
- The battery run time drops below about 80% of the original run time.
- The battery charge time increases significantly.
- If a battery is stored or otherwise unused for an extended period, be sure to follow the
storage instructions in this document. If you do not follow the instructions, and the battery
has no charge remaining when you check it, consider it to be damaged. Do not attempt to
recharge it or to use it. Replace it with a new battery.
- Always follow the charging instructions provided with your product. Refer to your product's
user manual and/or online help for detailed information about charging its battery.
- Charge or discharge the battery to approximately 50% of capacity before storage.
- Charge the battery to approximately 50% of capacity at least once every six months.
- Remove the battery and store it separately from the product.
- Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
3

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
Chapter 2 Installation Guide
2.1 Appearance
The AI-HT-T5 device has black and white appearance optional.
2.2 Buttons
Button Function
Power Button
Custom Function Button
SCAN
X
Num
Fn
Setting Button
Enter
Press and hold to turn the device on or off.
Customize function by software
Scan Button
Cancel Button
Switch white keyboard function
Switch orange keyboard function
Right of the Fn Button
Enter Button
4

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
2.3 Micro SD,SIM,PSAM Card Installation
Detailed installation of Micro SD,SIM,PSAM Card steps are as follows:
2.4 Battery Charging
Use the adapter to charge the battery via the USB connector of the snap-on.
Don't use other brands of charger for device.
2.5 Device Power on/off
Press the ‘Power’ button on the top about 3s due to power on/off. And press it
shortly to wake up.
5

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
Chapter 3 Call Function
3.1 Phone
Click this icon .
Click the number button to input the numbers.
Click the button to confirm and dial.
Click the to end the calling.
3.2 Contacts
Click 'Contacts' to open the contacts list.
Click to add the new contact.
Click to import/export or delete the contact list.
6

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
3.3 Messaging
Click to open the message list.
Click to input the content.
Click to send the message.
Click to add photos, videos.
7

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
Chapter 4 Barcode Reader
Open the Barcode Demo in APP Center and then press the 'Scan' button to
start scanning.
Note: Please scan the barcode correctly, otherwise the scanning might be failed.
8

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
Chapter 5 RFID Reader
5.1 High Frequency
5.1.1 14443A
Open the 14443A demo within Appcenter, and press the 'Scan' button to start
reading. Mifare and Ultralight reading/writing are also supported.
5.1.2 14443B
Open the 14443B demo within Appcenter, and gain UID of the card.
9

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
5.1.3 15693
Open the '15693' demo within Appcenter, and then reading and writing
information of the tag.
10

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
5.2 NFC
Open the 'NFC' demo within Appcenter, and then reading and writing information
of the tag.
Chapter 6 Other Functions
6.1 PING
1. Open the Ping in Appcenter.
2. Set the Ping parameters and select the internal/external addresses.
11

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
6.2 Bluetooth
1. Open the Bluetooth demo in Appcenter and turn on the Bluetooth.
2. Input the content or select the file, then scan the nearby Bluetooth printer and
pair them.
3. Select the printer and click ‘Print’ to print the content.
12

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
6.3 GPS
1. Open the GPS demo in Appcenter and turn on GPS module.
2. Set the GPS parameters and get the GPS data information.
6.4 Volume Settings
1. Open the Volume Setting demo in Appcenter.
2. Set the volumes based on the requirements.
13

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
6.5 Sensor
1. Open the Sensor demo in Appcenter.
2. Test the sensor based on the requirements.
6.6 Keyboard
1. Open the Keyboard demo in Handset Appcenter.
2. Set and test the key values of the device.
6.7 Network
1. Open the Network demo in Appcenter.
2. Test the WIFI/Mobile signal based on the requirements.
14

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
Chapter 7 Device Specifications
Dimensions
Weight
Screen
Keyboard
Battery
Expansion Slot
SIM Slot
Audio
157.6mm*73.7mm*29mm
292g (includes main battery)
4in.WVGA (480*800) TFT-LCD, capacitive dual touch
numeric keypad, 3 side buttons
Main bat. (rechargeable li-ion polymer, 3.7V, 4000 mAh)
MicroSD/TF, maximum capacity of 32G
1 PSAM, 1 SIM, 1 MicroSD
0.5W wat
15
Physical Parameters

Chinese Iput
Hand Writing Input / Full Keyboard Keypad
Keypad
© A.I. HARDWARE. All Right Reserved.
CPU
OS
Memory
Interface
Storage Card Type
Maximum Expansion Storage
Cortex A-53 1.3 GHz quad core
Android 6.0
1GB / 2GB RAM, 8GB / 16 GB ROM
USB Micro-B, OTG
TF card
128 GB
Performance Parameters
Operating Temperature
Storage Temperature
Humidity
Dropping Survive
Sealing
-10°C to 50°C
-40°C to 70°C
5%RH-95%RH (non-condensing)
1.5m/3.9ft. drop, 6 sides, concrete floor under operating temp.
IP65, IEC compliance
Environmental Parameters
WWAN
WLAN
WPAN
W ireless Communication
EU: 2G: 850/900/1800/1900MHz
3G: 850/900/1900/2100MHz
4G: B1, B3, B5, B7, B8, B20, B40
US: 2G: 850/900/1800/1900MHz
3G: 850/900/1700/1900MHz
4G: B2, B4, B7, B12, B17
CN: 2G: 900/1800MHz
3G: 900/1900/2000/2100MHz
4G: B1, B3, B38, B39, B40, B41
IEEE802.11 a/b/g/n, internal antenna
Bluetooth v4.0
16

© A.I. HARDWARE. All Right Reserved.
Chinese Iput Chinese Iput
1D Barcode Scan Engine
RFID
Data Collection
HF 13.56MHz, ISO14443A/ISO15693 (optional).
1D barcode (Symbol SE955, laser, hardware decoding):
UPC/EAN, Code128, Code39, Code93, Code11,
Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5,
Codabar, MSI, RSS, etc.
2D barcode (Symbol SE4500,COMS, software decoding):
Data Matrix, QR Code, Aztec Code, PDF417, US Planet,
UK Postal, etc.
2D Barcode Scan Engine
2D CMOS laser scanner: Symbol SE4500
Sensor resolution: 750 (horizontal) * 480 (perpendicular)
pixel (gray level)
Roll tolerance: 360o
Pitch tolerance: ±60o
Skew tolerance: ±60o
Ambient light: 9000ft.candles/96900 lux (lightless)
Aiming LED (VLD): 655nm ± 10nm
Illumination element: 650nm ± 5nm
Field of view: 40° horizontal , 25° perpendicular
Barcode type: PDF417, MicroPDF417, Composite, RSS,
TLC-39, Datamatrix, QR code, Micro QR code, Aztec,
MaxiCode; Postal Codes: US PostNet, US Planet,
UK Postal, Australian Postal,
Japan Postal Dutch Postal (KIX),etc.
Decode ranges:
SR Focus Near Far
5 mil Code 39: 2.1 in./53 mm. 7.5 in./191 mm.
100% UPC/ENA: 1.6 in./41 mm. 15.5 in./394 mm.
6.7 mil PDF417: 3.4 in./86 mm. 7.1 in./180 mm.
SDK
Programming Language
Developing Tool
SDK
Java
Eclipse/Android Studio
Environmental Parameters
17