AIDA TGEN-6P User manual

Reproduction of this manual, in whole or in part, by any means, is prohibited.
Version 1.0 / April 2020
Gen-Lock Reference
SYNC Generator
OPERATION GUIDE
TGEN-6P

2
WARNING
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
1. Be sure to use only the standard adapter that is specied in the specication sheet. Using any other adapter could cause re,
electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion,cause excessive heat or re
3. Securely plug the power cord into the power receptacle. Insecure connection may cause re.
4. Do not place conductive objects (e.g. screw drivers, coins, metal items, etc.) or containers lled with water on top of the camera.
Doing so may cause personal injury due to re, electric shock, or falling objects.
Continue on Next Page
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
This symbol indicates that dangerous
voltage consisting a risk of electric shock
is present within this unit.
PRECAUTION
This exclamation point symbol is intended to alert
the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.

3
5. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause re or electric shock
6. If any unusual smells or smoke come from the unit, stop using the product. Immediately disconnect the power source
and contact the service center. Continued use in such a condition may cause re or electric shock.
7. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way.
8. When cleaning, do not spray water directly onto parts of the product. Doing so may cause re or electric shock.
Please read this Operation Guide before installing and using the camera & retain this copy for your reference.
1. Always follow the instructions in the operation guide when applying power. Fire and equipment damage can occur if power is applied incorrectly.
For the correct power supply,refer to the specications page.
2. Do not use the device if fumes, smoke or a strange odor is emitted from the device, or if ii seems not functional correctly. Disconnect the power
source immediately and consult with your supplier.
3. Do not use the device in extreme environments where high temperatures or high humidity exists. Use the device under conditions where
temperatures are between 32° F - 104° F, and humidity is below 90%.
4. To prevent damage, do not drop the converter or subject it to strong shock or vibration.
Warning continues
PRECAUTION

4
TGEN-6P

5
• Multi format HD Tri Level Sync up to 1080p60.
• Both V Sync and H Sync generation for more accurate timing.
• Up to 6 synchronized reference output per device.
• Slave mode for cascading.
• Built in LCD screen.
• Built in setting dip-switches.
• Versatile, compact, and rugged design.
FEATURES
OPERATION
• SLAVE Mode
When switch 6 is set to SLAVE, TGEN-6P will go to SLAVE mode.
External reference input will be the main reference sync source.
TGEN-60 will distribute external reference sync signal.
• MASTER Mode
When switch 6 is set to MASTER, TGEN-6P will generate reference
signals set by the dip-switches.
TGEN-6P supports 15 different HD formats
720p: 60 / 59.94 / 50 / 30 / 29.97 / 25
1080i: 60 / 59.94 / 50
1080p: 60 / 59.94 / 50 / 30 / 29.97 / 25

6
720p SETTING
1080i SETTING

7
1080p SETTING

8
SYNCHRONIZATION
Reference Out Tri-Level HD
Format 1080p 60/59.94/50/30/29.97/25Hz
1080i 60/59.94/50Hz
720p 60/59.94/50/30/25Hz
Accuracy 2ppm
Reference In Tri-Level HD & Bi-Level SD
STANDARD
SMPTE SMPTE 274M, SMPTE 296M
PHYSICAL
Control Dip-switches & Text LCD
Operation Temp 32° F - 104° F
Dimension 129mm x 86m x 29mm / 5.07” x 3.38” x 1.10”
Weight 278g / 0.61lbs
Power 12VDC (+9 - +15VDC)
*Specication are subject to change without notice.
SPECIFICATION

9
CONNECTION

10
QUESTIONS
Visit us:
www.aidaimaging.com/support
E-mail us:
suppor[email protected]
Give us a Call:
Toll Free: 844.631.8367 |Tel: [phone]
Operating Hours: Mon-Fri | 8:00am – 5:00pm PST

11
Disposal of Old Appliances
1. When this crossed-out wheel bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately form the municipal waste stream in accordance to laws designated by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city ofce, waste disposal service or the shop where you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruc tion manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inter reference in which case the user will be required
to correc t the interference at his own expense.