Connect external antenna to Receiver and power supply,
plug it into TV or other HDMI input device; connect the
transmitter to a wall charger.
Note: During pairing mode, the TX does not need to be
plugged into the device, it only needs to be powered on.
To enter pairing mode, press and hold the function
button on the receiver for 3 seconds. Release the button
when the prompt appears on the screen to pair with
RX-AIMIBO.
Note: If you press and hold the function key for more
than 10 seconds, the receiver will automatically initialize
the program and return to the language selection interface.
2
Press and hold the function button on the transmitter for
3 seconds. Release the button when the indicator light
turns off, and the transmitter will restart. Wait for the
indicator light to start flashing quickly and then stop on a
steady light. On the TV screen, you will see "Pairing-OK"
3
1
TX
Release the button to
pair with RX-AIMIBO
