Aiphone GT-1C7W User manual

GT-1C7W/GT-1C7W-L
OPERATION MANUAL
Be sure to read this document (Operation Manual) in advance to use the productin the proper manner. Keep this in a safe
place for future reference.
The illustrations and images used in this manual may differ from the actual items.
Residential/Tenant Station

- 2 -
PRECAUTIONS
Prohibited Do not dismantle unit Keep unit away from water Be sure to follow the instruction
WARNING
(Negligence could result in death or serious injury.)
1. Do not disassemble or modify the station. This may result in fire or
electrical shock.
2. Keep the station away from flammable materials. This may result in
fire or electrical shock.
3. Keep the station away from liquid. This may result in fire or electrical
shock.
4. If there is smoke, abnormal odor, abnormal sound, or if the station is
damaged, immediately disconnect the AC plug or turn off the system
power breaker. This may result in fire or electrical shock.
5. Use the Aiphone power supply specific for use with the system.
This may result in finer or malfunction.
6. The AC outlet must be near the equipment and easily accessible.
7. Do not use the station in the following locations or under the following
conditions. Ignoring these may result in malfunction.
• This product is not intended for commercial applications, such as
hospitals.
• Near an electric medical equipment and locations such as Operating
Rooms, ICU, or CCU
• Near automatic control equipment such as auto doors or fire alarm
panels
• In an area within 15cm of a cardiac pacemaker
CAUTION
(Negligence could result in injury to people or damage to
property.)
1. Do not attempt to cover, insulate, or coat the station in any way. This
may result in fire or malfunction.
2. Do not apply excess pressure to the LCD screen. If the screen is
punctured it may result in injury.
3. If the LCD is punctured, do not touch the liquid crystal inside.
Inflammation could result.
* If liquid crystal is ingested, immediately gargle with water and
consult your doctor.
* If contact should occur, flush or rinse area with water thoroughly and
consult your doctor.
4. Do not puncture the LCD screen with a sharp object. If the screen is
punctured, it may result in injury.
5. Do not put your ear close to the speaker when using the station. May
cause harm to the ear if a sudden loud noise is emitted.
General Precautions
1. Read this manual prior to usage to ensure safe and correct operation.
Keep this in a safe place for future reference.
2. Keep the station at least 20 cm (7-7/8") away from wireless devices such
as wireless routers, or cordless telephones. These devices may cause the
image or sound distortion.
3. Keep the station more than 1m (3.3') away from radio or TV set. It may
cause interference and unwanted noise.
4. When making hands-free calls, talk within 30 cm (12") or less from the
station. If you stand too far away, it may be difficult for the other person
to hear the communication.
5. When installing or using the station, give consideration to the privacy
rights of subjects, as it is the responsibility of the system owner to post
signs or warnings in accordance with local ordinances.
6. In order to prevent sensitive information stored in the station from being
lost or stolen, it is the customer's responsibility to delete settings, recorded
video, and other information stored in the station, when discarding,
transferring, or returning the station. Refer to the relevant page of this
document (Page 31 and 41) for information on how to clear information.
7. As to other 3rd party devices (such as sensor, detectors, door releases)
used with this system, comply with the Specifications and Warranty
conditions that the manufacturers or venders present.
8. Do not install the station under direct sunlight. If it is necessary, shield the
station from sunlight or the screen may be difficult to view.
Notice
• The illustrations used in this manual may differ from the actual product.
• Aiphone is not to be held responsible for any and all damages resulting
from content or specifications of this product.
• Aiphone is not to be held responsible for any and all damages resulting
from malfunctions, defects, or misuse of this product.
• This product cannot be used during power outages.
• If the station is used in areas where there are business-use wireless devices
such as a transceiver or mobile phones, it may cause malfunction.
• It must be noted in advance that the LCD panel inevitably will have a very
small portion of its picture elements always lit or not lit it at all. This is not
considered a station malfunction.
• Hands-free calls are a method of automatically switching between the
transmitter and receiver so that the louder of the two is prioritized, making
it audible by the quieter of the two. If the surrounding area is loud, the call
may be interrupted, making it difficult to respond.
• During communication, the voice may not come through clearly when
speaking before the other party has finished talking. Communication will
proceed smoothly when waiting until the other party has finished before
speaking.
• When putting a hearing aid into T-mode and approaching the unit, the
intercom system may be affected by radio frequency interference etc.,
depending on the installation environment.
• When wall-mounted, the top of the station may darken. This does not
indicate a malfunction.
• Warm-color lighting shining on the door station may change the tint of the
image on the screen.
• If glare from an LED light or fluorescent light, etc. enters the camera, black
stripes may appear on the liquid crystal display of the master station, the
screen may flicker, and colors may differ. This is not a malfunction.
• When outside temperature lowers sharply after rainfall, etc., the inside of
the camera may fog up slightly, causing a blurry images, but this is not a
malfunction. Normal operation will be restored when moisture evaporates.

- 3 -
• Aiphone assumes no responsibility for corruption of saved information
(such as changes to or deletion of saved information). Be aware of this in
advance.
• If there is no power for 15 minutes or more, the date and time return to
default.
• This station is not meant to protect lives or property. Aiphone is not to be
held responsible for any and all resulting serious accidents, disaster
accidents, or physical damage.
• The noise reduction function may determine that certain tones are noise
and cut transmission of those tones. This is not a malfunction.
• If light enters the camera, the brightness of the LCD could flicker, while the
subject of the camera could become darker due to the backlight. This is not
a malfunction.
• The background or colors could differ from the actual image if a striped
pattern or other fine pattern is displayed. This is not a malfunction.
• Using a fluorescent light could periodically alter the color of the screen
(color rolling). This is not a malfunction.
• If communication becomes congested or calls are made from multiple
Video Stations in the system, the audio could drop, become delayed, or
otherwise not operate normally.
• Aiphone assume no responsibility for damages as a result of delayed or
unusable services, which were due to failures in network equipment,
communication services by Internet and cellular phone companies, line
interruptions, communication failures, or inaccuracies or omissions in
transmission unit.
• Aiphone is not to be held responsible for any damages resulting from
customer PINs or other transmitted information being leaked due to
interception, unauthorized access, or other reasons along the
communication path through the Internet.
• Due to the features and services provided by this station and the AIPHONE
Type GT app, future required changes to device functionality, network
communication, security, etc. may require firmware updates unavailable to
this station.
In this situation, this station would need to be replaced at the cost of the
responsible party.
• In the station and this manual, wireless LAN is referred to as "Wi-Fi"
regardless of whether or not the station has obtained Wi-Fi certification.
• Wi-Fi, Wi-Fi Protected Setup, WPA and WPA2 are trademarks or registered
trademarks of Wi-Fi Alliance.

- 4 -
PRECAUTIONS .......................................................... 2
PREPARATION
Part names and functions................................................ 5
Operation panel............................................................... 5
How to read screen .......................................................... 6
Initial set-up......................................................................... 7
Setting the current date and time .................................. 7
Changing the display language ...................................... 7
Preparing a microSDHC card.......................................... 8
About microSDHC card ................................................. 8
Inserting/removing a microSDHC card ........................ 8
Formatting a microSDHC card...................................... 9
Connecting with a mobile device................................. 10
Flow of the settings........................................................ 10
Connecting the station with Wi-Fi ............................... 11
Connecting using "Auto Connect (WPS)" .......................... 11
Connecting using "Manual Setup" ...................................... 11
Connection check ................................................................ 14
Confirming the current network settings............................. 14
Enabling or disabling the network connection.................... 15
Selecting the antenna........................................................... 15
Connecting a mobile device with a Wi-Fi router........ 17
Registering a mobile device to the station................... 17
Downloading the App to the mobile device ........................ 17
Registering a mobile device to the station........................... 17
Deleting the mobile device from the station ....................... 20
USING THE STATION
Receiving a call................................................................. 21
Answering a call ............................................................ 21
Operation during receiving a call or communication ... 22
Releasing the door............................................................... 22
Activating an external unit such as lightning equipment .... 22
Activating doctor call .......................................................... 22
Changing the display to the full-screen mode..................... 23
Zoom In/Zoom Out ............................................................. 23
Pan/tilt operation ................................................................. 23
Recording ............................................................................ 24
Communication using touch-to-talk.................................... 25
Adjusting the screen brightness........................................... 25
Adjusting the receiving volume........................................... 25
Turning on/off visibility enhancement ................................ 26
Turning on/off the light control ........................................... 26
Switching to surveillance camera video image ................... 27
Monitoring the entrance station................................... 28
Calling the guard station................................................ 28
Playing recordings........................................................... 29
Screens and icons........................................................... 29
Playing recordings......................................................... 30
Protecting recordings .................................................... 30
To protect a recording on the recording list......................... 30
To protect the currently-selected recording
while in standby................................................................... 30
Deleting a recording...................................................... 31
To delete a recording ........................................................... 31
To delete all recordings ....................................................... 32
Copying recordings from the built-in memory
onto a microSDHC card................................................ 32
Emergency alarm............................................................. 33
When receiving a call from the guard station............. 33
Noti¿cation......................................................................... 34
SETTINGS
Settings list........................................................................ 35
Adjusting screen brightness......................................... 36
Changing the sound settings ....................................... 37
Adjusting receiving volume .......................................... 37
Adjusting ringtone volume ........................................... 37
Enabling/Disabling the touch sound............................ 37
Changing the time settings........................................... 38
Setting the current date and time ................................ 38
Selecting the display format of the date and time ...... 38
Setting the time zone ..................................................... 38
Setting daylight saving time.......................................... 39
Changing the display language ................................... 39
Cleaning mode.................................................................. 39
Setting of noti¿cation LED............................................ 39
Other settings ................................................................... 40
Registering/Deleting a mobile device........................... 40
Setting a microSDHC card........................................... 40
Adjusting video quality................................................. 40
Viewing station information ......................................... 41
Viewing a notification for updating the station ................... 41
Configuring the settings for automatically
updating the station ............................................................. 41
Configuring network settings ....................................... 42
Initializing user settings................................................ 42
Confirming the related regulations.............................. 42
Confirming information about Protection
of Personal Information................................................ 42
FOR PROPER USE OF THE STATION
Updating a ¿rmware of the station.............................. 43
Automatic update through the network ...................... 43
Receiving a notification for available updates
through the network...................................................... 43
Updating the station by using a microSDHC card on
which the newest version of the firmware is stored.... 44
Cleaning.............................................................................. 44
Cleaning the exterior surfaces...................................... 44
Cleaning the screen ....................................................... 44
Troubleshooting............................................................... 45
Technical precautions..................................................... 45
Speci¿cations ................................................................... 46
Regulations........................................................................ 46
Warranty ............................................................................. 48
Table of Contents

- 5 -
PREPARATION
Part names and functions
Operation panel
Microphone
Noti¿cation LED (Orange)
Indicates the current status of the station by lighting up or Àashing.
Station status Indication pattern
Rebooting. (0.75 sec.)Lit (0.75 sec.)
Updating the ¿rmware. Oႇ
Some recordings have not been viewed. (1.0 sec.) (1.0 sec.)
Some noti¿cations have not been viewed. (1.0 sec.) (1.0 sec.)
In standby mode Off
In standby mode
(Ringtone volume: Off) (0.5 sec.) (5.5 sec.)
In standby mode
(Doctor Call: On) (0.5 sec.) (2.5 sec.)
The system is in use by another station.
(This station is inoperable.) Off
Receiving a call from an entrance station (0.5 sec.) (0.5 sec.)
Communicating with an entrance station Lit
Monitoring an entrance station Lit
Calling a guard station (0.5 sec.) (0.5 sec.)
Receiving a call from a guard station
Communicating with a guard station Lit
Receiving a call from a door bell (0.5 sec.) (1.0 sec.)
Emergency alarm (0.5 sec.) (0.5 sec.)
RESET button
Press this button to reboot
the station when it is not
responding. microSDHC card slot (ĺP. 8)
Speaker
M
Color LCD touchscreen
See the next page for details.
Remove protective film before
use.
Wireless LAN antenna A Wireless LAN antenna B

- 6 -
PREPARATION
How to read screen
The screen of the station is a touchscreen. Simply tap the icons or buttons displayed on the screen.
The following are examples of typical screens and icons.
* The displayed screens and icons may differ depending on the devices connected to this system.
■MENU screen
This screen appears when the monitor is turned on.
Tap to record the currently displayed
video.
* will be lit in red while recording.
Monitor (ĺP. 28)
Tap to monitor the entrance station.
Recording List (ĺP. 29)
Tap to play recordings.
* This icon blinks when there is a recording that has not been played yet.
Noti¿cation (ĺP. 34)
Tap to display the noti¿cation list.
* This icon blinks when a new
noti¿cation has arrived.
Settings (ĺP. 35)
Tap to con¿gure the settings.
Tap to con¿gure the screen brightness,
receiving volume, etc. (ĺP. 25)
Doctor call (ĺP. 22)
Tap to activate or disactivate the doctor call.
* Depending on settings, this icon may not be shown.
Oႇ
Tap to turn the monitor oႇ.
Tap to return to previous screen or
undo the last action.
Tap to apply or con¿rm.
* (deleting all recordings) will
be shown when the recording list
is displayed.
Tap to return to the previous page. Tap to move to the next page.
Tap to move to the MENU screen.
Set whether or not to enable mobile
device to receive calls from the
entrance station and guard station.
Option (ĺP. 22)
Tap to activate the connected
external device.
* Depending on settings, this
icon may not be shown.
Displayed when a microSDHC card is installed and available.
*
will be shown while a read or write operation is performed on
a microSDHC card. Do not remove the microSDHC card while
this icon is displayed. Otherwise, the data may be damaged.
* will be shown when a non-conforming microSDHC card
is installed. (ĺP. 8)
Hearing aid icon (*1)
(GT-1C7W-L only)
Displayed when the ringtone is set to mute.
Indicates the Wi-Fi signal strength when the
station is connected to the network. (ĺP. 10)
Indicates the number of the mobile device
registered to the station.
Current date and time
By tapping this, you can set the
current date and time. (ĺP. 38)
■While communicating with the entrance station
■Navigation buttons
*
t
here is a record
ing
.
that has not been
pl
aye
d y
et.
o
ti
¿
c
e
n
a
ved
c
ation list.
a
n
e
w
Door release (ĺP. 22)
Tap to unlock the door at the entrance station.
Tap to answer a call.
Tap to call the guard station.
* Depending on settings, this icon
may not be shown.
Option (ĺP. 22)
Tap to activate a connected external
device.
Tap to switch the display mode
between zoom and wide. (ĺP. 23)
NOTE:
Do not puncture the LCD screen with a sharp object. If the screen is punctured, it may result in injury.
(*1): This station emits an electromagnetic field for hearing aids equipped with T-mode to produce clear audio.
s,

- 7 -
PREPARATION
Initial set-up
Setting the current date and time
When the station is powered up for the ¿rst time, set the
current date and time.
1 If the monitor is oႇ, tap the screen to turn on the
LANGUAGE 1/2 screen.
2 Tap desired display language, then tap 9.
3 Tap 9to set the date and time.
4 Tap the proper time zone from the list of time
zones.
* Tap > or < to change the pages of the list.
5 Tap 9to apply changes.
The CURRENT TIME screen is shown.
6 Set the day, month, year, hour, and minute
individually by taping or .
7 When the setting has ¿nished, tap 9.
■To correct date and time
Correct the current date and time any time by following the
procedure below.
1 From the MENU screen, tap ĺDate/Time
ĺCurrent Time .
2 Set the day, month, year, hour, and minute
individually by tapping or .
3 When the setting has ¿nished, tap 9.
NOTE:
• A maximum of 60 seconds time gain/loss can occur in the
displayed time over a month. It is recommended to correct the
time periodically.
• When the station is connected to the internet, the date and time
are automatically corrected.
• If there is no power supply for 15 minutes or more, the date and
time return to default.
Changing the display language
The display language for the screen is set to English by
default. First, select a language as follows.
1 From the MENU screen, tap ĺLanguage .
The LANGUAGE screen is shown.
2 Tap desired language, then tap 9.
* Tap > or < to change the pages of the list.
Day Month Year Hour Minute

- 8 -
PREPARATION
Preparing a microSDHC card
About microSDHC card
A microSDHC card is not included with the station.
Choose a microSDHC card using the recommended
speci¿cations below.
Speci¿cations
Standard microSDHC
Storage Capacity 4 to 32 GB
Format FAT32
Speed Class 10
The recordings are stored in a microSDHC card.
If a microSDHC card is not installed, recordings are saved in
the built-in memory. Up to 10 recordings can be saved in the
built-in memory.
* The maximum number of recordings that can be saved in
the microSDHC card depends on its storage capacity.
* Up to 1,000 recordings can be saved.
NOTE:
• Use a card complying with the SD standard.
Some cards may not perform correctly.
• If a microSDXC card is inserted in the station and formatted with
the station, it will not be identified as a microSDXC card.
• Be sure to format a microSDHC card when using it in the station
for the first time. If there remain some data other than recordings
in the card, a recording may fail because of a shortage of memory.
• Do not remove a microSDHC card or reboot the station while
recording, formatting a card or copying recordings onto a card,
otherwise the card may fail to perform properly when recording or
playing videos. Should this occur, reformat the card.
• Aiphone is not responsible for the performance of a microSDHC
card.
Inserting/removing a microSDHC card
NOTE:
Be sure to insert or remove a microSDHC card when the station is in
standby mode, and not communicating with entrance station or guard
station.
■Inserting a microSDHC card
In standby mode, insert a microSDHC card into the
card slot.
Insert the card in the way shown below.
• If compatible, a message will appear saying the card has
been recognized.
• If a message appears to format the card, tap 9and
format the card. (ĺP. 9)
■Removing a microSDHC card
Lightly push on the card to pop out.

- 9 -
PREPARATION
Formatting a microSDHC card
MicroSDHC card may require to be formatted when used with
the station for the ¿rst time.
* Previously formatted microSDHC card may not work with the
station. Be sure to format a microSDHC card using the
station.
* Note that formatting a microSDHC card deletes all existing
data.
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation message will be shown.
2 To continue con¿guring the settings, tap 9.
3 Tap microSDHC Card ĺ
Format microSDHC card .
A message will appear asking whether to continue
formatting a microSDHC card or not.
4 Tap 9.
When completed, "The microSDHC Card has been
formatted." will be shown.
* This process may take an extended amount of time.
* Tap to cancel formatting.
12
12
3

- 10 -
PREPARATION
Connecting with a mobile device
Flow of the settings
The following settings are needed to establish a connection link with a mobile device.
Connect the station with Wi-Fi. (ĺP. 11)
Register a mobile device to the station. (ĺP. 17)
Connect a mobile device with the Wi-Fi.
(See the instruction manual of each mobile device.)
NOTE:
• Prepare a commercially available Wi-Fi router for connecting the system to the internet. A Wi-Fi router is not included with this product.
• The residential/tenant station uses radio waves in the 2.4 GHz band.
• Using a microwave oven may affect Wi-Fi communication in 2.4 GHz band.
• The channel 1 to 11 can be used.
• The bandwidth required for connecting to Internet is as follows (when only the station is connected to Wi-Fi):
Minimum Internet connection bandwidth
Video quality In upload (Mbps) In download (Mbps)
Minimum 0.3 0.2
Medium Low 0.5 0.2
Medium High 0.8 0.2
Maximum 1.3 0.2
• Be sure to set the current date and time on the station in advance. If the set time differs from the current time for more than 1 month, the
Aiphone app may not work correctly.
• Up to 8 mobile devices can be registered to the station.
• Register a wireless LAN router to only one GT-1C7W(-L) in the same residence/tenant.
Features:
• A call and video from the entrance station or guard station can be received with a mobile device.
Communication between the entrance station or guard station and a mobile device is also possible.
• Emergency alarm can be received with a mobile device.
• Recordings on the station can be played and viewed with a mobile device.
Checking the signal strength:
The connection status between the station and the network can be checked on the MENU screen.
When the connection settings have been completed, confirm whether the connection is successful.
Weak
Out of range
Not connected to
the server The Wi-Fi function is disabled.
Strong

- 11 -
PREPARATION
Connecting the station with Wi-Fi
There are two connecting methods available.
• Auto Connect (WPS)
• Manual Setup
• Wi-Fi (Search SSID)
• Wi-Fi (Manual Setup)
• IPAddress
Connecting using "Auto Connect (WPS)"
This method connects to a Wi-Fi network using the "Wi-Fi
Protected SetupTM" function of a router/STB. Select this
method when it is not required detailed settings.
1 From the MENU screen, tap ĺ>
ĺOther Settings.
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Network ĺ9ĺAuto Connect (WPS) .
4 Press the WPS button on the Wi-Fi router, and
then
tap
9.
Connection between the residential/tenant station and
Wi-Fi router is established automatically. (In some cases, it
may be necessary to tap 9before pressing the WPS
button on the wireless router.)
When "The Wi-Fi router has been connected." is shown,
the connection is successful.
If the connection is failed
"Connection failed" will be shown.
Con¿rm the current network settings and change the settings
properly. (ĺP. 14)
If the connection cannot be established properly, use the
"Manual Setup" method.
* If you connect the station to the Wi-Fi router by using the
"Auto Connect (WPS)" method after the IP address was set
by using "Manual Setup" method, initialization of the user
setting is necessary. (ĺP. 42)
Connecting using "Manual Setup"
Select this method to con¿gure the detailed settings.
1Con¿guring wireless LAN
Con¿gure the settings for the following items manually.
Item Description
SSID Tapping the entry field displays the keyboard.
(ĺP. 16)
Use the keyboard to enter the SSID of the wireless
LAN router.
Encryption Tapping the entry field displays the choices. Select
the appropriate encryption method, and tap 9.
Settings: None / WEP / WPA-PSK(TKIP/AES) /
WPA2-PSK(AES)
Default: WPA2-PSK(AES)
Password Tapping the entry field displays the keyboard.
(ĺP. 16)
Use the keyboard to enter the password.
* Hexadecimal key format is not supported.
* When using the keyboard, be sure to tap 9after ¿lling
out the entry ¿eld to determine the contents.
* Do not use the character "and \for setting the SSID.
1
2
3
12
3

- 12 -
PREPARATION
zSearching SSID
* The SSID of a router with the SSID stealth mode will not
be displayed.
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Network ĺ9ĺManual Setup .
4 Tap Wi-Fi (Search SSID) .
The SSID search result will be displayed.
5 Select the SSID.
* If SSIDs are not displayed, tap to update.
6 Select the encryption method, enter the
password, and then tap
9.
Tap to return to the MANUAL SETUP screen.
zWhen inputting SSID manually
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation mesage will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Network ĺ9ĺManual Setup .
4 Tap Wi-Fi (Manual Setup) .
5 Con¿gure the settings for each item,
and then tap
9.
Tap to return to the MANUAL SETUP screen.
1
1
3
3
2
2
1
2
3
1
2

- 13 -
PREPARATION
2Setting IP address
1 From the MANUAL SETUP screen,
tap IP Address .
The setting items will be shown.
2 Con¿gure the settings for each item .
* Tap > or < to change the page of the item list.
Item Description
IP Select the IP version (v4 or v6) and
the setting method (Auto or
Manual).
IP Address/
Subnet Mask (v4 only)/
Prefix (v6 only)/
Default Gateway/
DNS Server
It can be configured only when IP is
set to "Manual".
* When "Auto" is selected, the
settings are automatically
con¿gured and grayed out.
Tapping the entry field displays the
keyboard. (ĺP. 16)
Tap 9after ¿lling out the entry
¿eld to determine the values.
3 When the IP settings have been completed,
tap
9.
Tap to return to the MANUAL SETUP screen.
NOTE:
• The station will restart when changing IP version (IPv4/IPv6) or
configuring IPv6.
• If you connect the station to the Wi-Fi router by using the "Auto
Connect (WPS)" method after the IP address was set by using
"Manual Setup" method, initialization of the user setting is
necessary. (ĺP. 42)
Number of registerd Apps con¿rmation
message
When connecting to the network for the ¿rst time, delete
registered apps (ĺP. 20) before making setting changes.

- 14 -
PREPARATION
Connection check
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Network ĺ9ĺManual Setup .
4 Tap Connection Check .
5 T ap
9.
The residential/tenant station will check the wireless
network connection.
When "The Wi-Fi router has been connected." is shown,
the connection is successful.
If the connection is failed
Con¿rm the current network settings and adjust if needed.
(ĺP. 14)
Con¿rming the current network settings
Con¿rm the current network settings when the network
connection is unstable.
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Network ĺ9ĺStatus .
The current settings will be shown.
* If required, change the settings (ĺP. 11).
1
2
3
1
2
3

- 15 -
PREPARATION
Enabling or disabling the network
connection
If necessary, disable or enable the network connection.
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Network ĺ9
ĺNetwork Advanced Settings ĺWi-Fi .
4 Tap either
Enable or Disable
, and tap
9.
Selecting the antenna
Antenna of the station can be selected according to the
reception status or the location of the station or Wi-Fi router.
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Network ĺ9
ĺNetwork Advanced Settings
ĺAntenna Selection .
4 Tap either
Antenna A or Antenna B
, and tap
9.
* The Wi-Fi signal strength of the selected antenna will be
shown.
1
1
2
2
3
4
4
3

- 16 -
PREPARATION
Full keyboard
For number input For hexadecimal number input
Alphanumeric input mode (lower case)
Alphanumeric input mode (upper case)Symbol input mode
Switches to the alphanumeric
input mode (upper case). Moves the cursor
Cursor
(yellow highlight) Backspace key
Applies the inputted value and
closes the keyboard
Switches to the symbol input mode.Switches to the alphanumeric input mode
(lower case).
* The use of each key is the same with the full keyboard.
Cancel and return to
the previous screen.
Using the keyboard
Moves the cursor Moves the cursor

- 17 -
PREPARATION
Connecting a mobile device with a
Wi-Fi router
Registering a mobile device to the station, the mobile device
must be connected to the same Wi-Fi router as the one
connected to the station. Refer to the instruction manual of the
mobile device for how to connect the mobile device to a Wi-Fi
router.
Registering a mobile device to the
station
NOTE:
• Ensure the mobile device is connected to the Wi-Fi network.
• The screen images in this manual may differ from the actual
product.
• A confirmation screen may be shown during registering or after
registration. Read the contents carefully and tap "Agree". Cannot
receive notices for the intercom app without confirmation.
• When registering the first mobile device, the location setting is
required.
• When registering the first mobile device, check the number of
registered mobile devices and delete all of them beforehand.
(ĺP. 20)
Downloading the App to the mobile
device
Operation with the station
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Register / Delete Apps ĺApp QR Code.
AIPHONE Type GT app information is shown on the
screen.
Operation with a mobile device
4 Search "AIPHONE Type GT" and download the
AIPHONE Type GT.
Download from the following:
• iOS device: App Store
• Android device: Google Play
* App Store is trademark of Apple Inc. in the United States and/
or other countries.
* Google Play is trademark of Google Inc. in the United States
and/or other countries.
Registering a mobile device to the station
Operation with a mobile device
1 Run the AIPHONE Type GT from the icon on the
Home screen
.
2 Allow this app to send noti¿cations.
3 Set the display language.
Select the language by tapping the screen.
4 Read the license agreement carefully and tap
Agree .
* Cannot use the intercom app without agreement.

- 18 -
PREPARATION
5 Read the screen for the End User Licence
Agreement carefully and tap
Next.
Operation with the station
6 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
7 To continue con¿guring the settings, tap
9.
8 Tap Register / Delete Apps ĺRegister Apps .
9 Tap your area, and tap
9.
* Another area will be shown on the next page. tap >
or < to change the page.
* When registering the second and subsequent mobile
devices, the location setting is unnecessary.
10 Select
Agree
or
Disagree
and tap
9.
* AIPHONE Type GT cannot be used without the End
User License Agreements.
The following message will be shown.
Read the message, and proceed to the mobile device
operation.
* If returns to the Register/Delete Apps screen, tap .
Operation with a mobile device
11 Tap
Start.
One-time password will be shown on the residential/tenant
station.

- 19 -
PREPARATION
If the following error message appears
You need to register the mobile device to the residential/
tenant station manually as follows.
1Tap OK to close the error message.
2Uncheck the check box, and tap
Start.
3Enter the IP address displayed on the residential/
tenant station screen in step 10, and tap Next .
Con¿rmation with the station
12 One-time password will be shown.
One-time password Expiration time
Operation with a mobile device
13 Enter the one-time password displayed on the
screen of the station within the expiration time,
and tap Next .
14 Enter the user name of the mobile device and
tap Register .
Name is limited to 12 characters.
15 Follow the on-screen instructions.
"Initial Settings has been set." is shown with registration is
successful.
16 Try to receive a call from the entrance station.
• If you will perform an operation con¿rmation after the
registration has been completed, ¿rst return to the
MENU screen.
• For more information on using the app and detailed
settings, refer to the instructions provided with the app.
• To register another mobile device, repeat the process
starting at step 1.
Enter user name
Enter one-time password.
1
2

- 20 -
PREPARATION
Deleting the mobile device from the
station.
1 From the MENU screen, tap ĺ>
ĺOther Settings .
A con¿rmation screen will be shown.
2 To continue con¿guring the settings, tap
9.
3 Tap Register / Delete Apps ĺDelete Apps .
4 Tap the mobile device to delete.
* The 7th and 8th mobile devices will be shown on the
next page. Tap > to change the page.
The con¿rmation message will be shown.
5 To delete App, tap
9.
When "App has been deleted." is shown, the deletion has
succeeded.