Aiphone GT-1M3 User manual

QR Code
Place
Holder
This operation guide describes the basic
functions of your GT Series Tenant Station
12 / 2016
Use the
dial to
adjust the
LCD screen
brightness
levels (0~10).
LCD Screen
Brightness
Control
Use the dial
to adjust the
communication
volume (0~10).
Volume
Control
Use the dial to
adjust the chime
volume (0~10). The
status indicator light
blinks slowly when
the chime is muted.
Chime Volume
Control
GT-1M3 Tenant Station
GT-1M3 Operation Guide |1 of 1
For a complete operation manual (3.71 MB), scan QR code or use link to download
it from the manufacturer’s website: www.aiphone.com/gt-1m3_op-man
Push the door release
button to unlock the
entrance during a call.
Door Release Button
Push the option
button to activate
an external device
(if included).
Option Button
Push the guard button to
call all guard and concierge
stations connected to the
system (if included). To view
a visitor on a CCTV camera
(if enabled), push the guard
button while in communication
with the entrance station.
Guard Button
Push the adjust button to compensate
for low or bright backlight conditions
when viewing video from a door station.
Adjust Button
Push the talk/ off button
to answer an incoming
call. Once answered,
conversation becomes
hands-free. Push the talk/ off button
again to end a call (this does not
turn off the station). For push-to-talk
(PTT) mode, push the TALK
button until a beep is heard. The
conversation then requires the TALK
button to be pushed and held while
talking and released while listening.
To end the PTT conversation, push
the TALK button one time without
holding (this does not turn off the
station). Whether the conversation is
hands-free or PTT, the talk indicator
light turns on while you speak and
will turn off while your visitor speaks.
Talk / Off Button
Status Indicator LightMicrophone
Speaker
LCD Screen
Push the zoom/ wide button
to change the screen view.
Zoom/Wide Button
This tenant station is
powered by the system
and will always remain on,
even when the screen is
off. Contact the building
manager if the tenant
station in this residence
is not working.
Power Source