AIRINNOVATIONS AI-110 User manual

ULTRASONIC COOL MIST PORTABLE HUMIDIFIER
USER GUIDE
WARNING
CAUTION
PARTS
READ AND SAVE THESE INSTRUCTIONS:
Failure to follow all the instructions may result in electrical shock.
• Do not use this unit for any purpose other than described in this manual
or packaging.
• Do not use if there is damage to the unit or USB cord.
• Do not use on unstable surfaces.
• Do not leave plugged in when not in use.
• Do not place unit upside-down when wet.
• Do not touch plug with wet hands.
• Do not fully immerse the unit or pour water through the mist outlet.
• Do not insert any foreign objects into the mist outlet.
• Do not use anything other than room temperature tap or distilled water.
• DO NOT USE ESSENTIAL OILS.
• Keep out of reach of small children.
• Always insert plug securely into the power source.
• Change water daily.
• Unplug the unit before carrying/moving.
• Dry the unit completely before storage; store in a cool, dry place.
• Do not drop, hit or otherwise subject this product to excessive shock.
Wick
Minimum fill
point
Power
button
Wick
Minimum fill
point
Power
button
continued on reverse side
INCLUDED:
Humidier,
3 Wick Filters,
USB Cable
VOLTAGE: 5V DC

USAGE INSTRUCTIONS
CARE & WEEKLY MAINTENANCE
WARRANTY
1. LET THE WICK FILTER SOAK 5-10 MINUTES BEFORE USE.
2. Pour water into any standard cup until water reaches at least the
minimum ll point. To prevent tipping during use, use a cup with a
sturdy, stable base.
3. Place humidier in the cup.
• Avoid getting the power button or power port from getting wet.
• Do not fully immerse in water.
4. Plug into a power source using the USB cable.
5. Press the power button. Indicator light will illuminate blue and mist will
emit from the nozzle in “continuous mode”. When the button is pressed
again the light will change to red and the unit will be in “intermittent
mode”, misting on and off every 7 seconds. Pressing the power button a
third time will turn the unit off. Note: Mist may not appear immediately;
allow up to 15 minutes for unit to mist.
6. The unit is pre-programmed to shut off after 2 hours. Press the power
button again to re-start.
ALWAYS unplug from power source before cleaning. Do not immerse or
pour water onto the on/off switch.
Cleaning the Wick and Absorption Pipe
1. Twist left to unlock the Absorption Pipe
and remove Wick. (A)
2. Wash the Wick and inside the Absorption Pipe
thoroughly with water.
3. Reset the Wick into the Pipe; twist the Pipe right
to lock into the main body. (B)
NOTE: We recommend changing the wick
between 30-60 days depending on usage and
water quality (hard water will reduce the wick life).
Reduced mist is an indication that the wick needs
to be replaced.
Cleaning the Nebulizer
Clean the surface of the Nebulizer gently with a cotton swab; do not
scrape the nebulizer with a sharp object. If hard water scale is evident,
use a mixture of vinegar and water to clean the Nebulizer and
surrounding areas.
Storage
1. Remove the Wick & dry all parts before storing.
2. Store in a cool, dry place.
This product is warrantied to be free from manufacturing defects under
normal use and conditions for 1 year. This warranty requires a copy of your
dated proof of purchase. WARRANTY IS VOID IF THE DEFECT IS DUE TO:
Accidental misuse, abuse or neglect, use of essential oils, improper repair,
or failure to follow instructions provided.
Air Innovations® ©2017 Great Innovations, LLC. All Rights Reserved.
IM0058A
www.Air-Innovations.com 844-600-1370
A
B