AIRINNOVATIONS MH-602 User manual

READ AND SAVE THESE INSTRUCTIONS
OWNER‟S MANUAL OF HUMIDIFIER MH-602
Instruction
Technical Data
Working Principle
Features
Correct Humidity Level
Function of MH-602
Security Guide
Explored Drawing
Operation Instruction
Trouble Shooting Guide
Maintenance
*Technical data
Model No: MH-602
Standard Output: 300ml/H
Water Tank Volume: 5.8 Liter
Noise Level: ＜35 dB (A)
Rated voltage: 220-240V
Frequency: 50Hz
Rated Power input: 30W
N.W/G.W: 1.6kg/1.9kg
*Working Principle: Ultrasonic Humidifier use the ultrasonic high-frequency oscillator to break up
water into tiny water particles with the diameter of about 1-5um.The ventilation system blows out this
water into the dry air where they evaporate to give the required humidity. The clearly visible smooth
and even fog can be seen out of the unit.
*Features:
High efficient in humidification with large output.
Low energy consumption, save 85-90 percent of electricity of normal stream humidifier.
Long lifetime
Automatic control to humidity level, lack-water security protection.
*Correct Humidity Level:
What exactly is relative humidity: Relative humidity is the percentage of the actual water
vapor contains to the saturated water vapor contains under the same definite temperature and space.
We normally mark it with ％RH, like 45％RH. Atomosphereic air always contains water vapor, the
percentage of which depends the meterological conditions. The higher the temperature is the more the
air keeps water vapor. Therefore, we use the concept of „relative humidity”. When the cold air ins
heated up to the comfort temperature in winter, the relative percentage of the water vapor falls which
means the relative humidity drops. In order to keep a comfortable and health environment at home, we
need some artificial addition of water or water vapor to room air- that‟s air humidification.

Ideal relative humidity levels under different situations.
The most comfort RH for human being 45-65％RH
Ideal RH for prophylactic and curative purpose: 40-55％RH
Computer and telecom apparatuses: 45-60％RH
Furniture and musical instrument: 40-60％RH
Library art gallery and museums: 40-60％RH
*Function of MH-505Ultrasonic Humidifier:
To increase and to regulate relative humidity of the room air;
To eliminate electrostatic charges;
To prevent different diseases:
To keep your appearance fit and protect your skin:
To adjust room temperature
*Security Guide:
Warning: Please be aware of the following points otherwise you might in danger if high
voltage charges or but your body.
1) Never disassembly the base unit without consult qualified personnel.
2) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
3) Do not change attachment without definite permit from our company otherwise you might
catch hazard.
4) Any abnormal smell during normal operation, please switch off and disconnect power
supply and want qualified personnel amend.
5) Unplug appliance during filling, cleaning and maintenance.
6) Do not add detergents, chemical solutions which are not made by our company into the
unit.
7) Keep detergents, chemical solutions away children.
8) Cleaning with clear water when detergents & chemical solutions splash into mouth & eyes,
consulting doctors against serious hazard.
9) Never touch water in the Water Basin & components in the water when the unit is in
working.
10) Never switch on when there is no water in the water basin.
11) Never scrape Ultrasonic Atomizing Transducer at will.
12) Never clean Ultrasonic Atomizing Transducer with detergents, chemical solutions that not
made by our company.
13) Never let water splash into inner Base Unit when cleaning for avoiding components
damage.
14) Never move the machine with the full water tank.
15) Posit the unit on the even surface and keep the machine at lease 2 meters far away from the
furniture and the other electrical appliances.
16) Care should be taken due to emission of hot vapor.
17) This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
18) Children should be supervised to ensure that they do not play with the appliance.

*Operation Instruction
First Operation, put unit under the room temperature for half of an hour before running
(Especially when the outdoor temperature is lower than 5℃).
It is recommended to use the unit under temperature of 5-40℃, relative humidity less than 80％
RH.
Use clear water not over 40℃.
Check the water basin, make sure it is clear.
Operation steps:
1. Take the water tank (3) out of the base (7), revolve the tank-cap by the directions of
LOOSEN and FASTEN (5), and fill the water tank (3) with clear water. Close the tank-cap
(5), and put the water tank (3) onto the base (7) carefully.
2. Put the Nozzle (1) into the socket on top of the water tank (3).
3. Connect the power cord (9), switch on the unit (8) (NEVER RUN THE UNIT WHEN
THERE IS NO WATER IN WATER BASIN), the LED display will on for 2 seconds then be
off. The unit stands by.
4. ON/OFF: It takes charge the electric supply of the whole unit. When press ON, the display is
on, the machine operates with the lowest mist output, at the same time the fan motor works.
When it is OFF, all the functions are invalid, and the display is off.
5. DELAY START: When the unit stands by, press this button. The preset time can be chosen
from 1 hour to 24 hours. The preset time will be counted down to work with the highest mist
output.At the same time, Ionizer works, the humidity level is 99RH%.
6. MIST: 4 levels from Low, Middle, Senior to High for different mist output. And the

corresponding power is from 17-19W (L), 19-23W (M), 23-27W (S) to 27-30W (H).
7. AUTO OFF: Settings from 1- 24 hours. 0 means cancelling the settings. 3 seconds after your
settings, the timer function will be counted down to work by minutes and will display with
current humidity by turns for 5 seconds if having set the humidity level.
8. HUMIDISTAT: Settings from 40 -95RH% by 5RH%. 0 means cancelling the settings. 3
seconds after your settings, the humidistat works. It stops when the current humidity is more
than the setting level, but the fan motor will keep working for 5 minutes. And will operate
when the current humidity is 2RH% less than the setting level.
9. ANION: When the machine stands by, press the ANION button, it works whatever it is
humidifying. The fan motor works at the same time. If it is not humidifying, when the
ANION is off, the fan motor stops. But if it is humidifying, when the ANION is off, the fan
motor still works.
10. Protection when waterless: When the tank is out of water, the Waterless lamp is on. And the
machine stops. Then the settings of TIMER and HUMIDISTAT will be cancelled. When
filling the water, it should be reset for the functions.
*Trouble Shooting Guide
Any trouble found in normal operation, please kindly refer to the following points:
Trouble
Possible reasons
Shooting Way
LED display is off
No power supply
Connect power supply
Not press ON
Switch on
LED display is on, no mist no
wind
No water in water tank
Fill water into water tank
Too much water in the water
basin
Pull out some water from the
water basin, closed the cover of
water tank tightly.
LED display is on, no mist but
with wind
Mist output is set on the lowest
level
Adjust the mist output
LED display is on, with water
but shows waterless
Floater is interrupted
Waver the floater, keep it free
Abnormal smell mist
New unit
Take out water tank, open cover,
let it stays 12 hours in cool
position
Dirty water or long time staying
water
Cleaning water tank, fill in clear
water
Mist fog is too small
Too much scale in the water
basin
Clean transducer
Water is too dirty or water kept
too long time in the tank
Clean water tank, change to
fresh clear water
Water is too cold
Add some warm water inside
Abnormal noise
Resonant in water tank when
water is too lower
Fill water tank with water

Unit is on a unstable surface
Move the unit to a stable flat
surface
Mist coming out around the
nozzle
There are apertures between the
nozzle and water tank
Dip the nozzle in water for a
while and then fix it to the socket
on water tank
Water doesn‟t come down to
basin
Backup by filter
Rinse the filter by tap water
Display shows blinking digital
30%RH
Current humidity level is lower
than 30%
Just keep it working
Display shows Sd (Sensor
defect)
Poor contact for humidity
sensing element
Reinstall it
Open or Short for Temperature
Resistance
Replace it
*Maintenance:
In case when the water is hard which means water contains too much calcium and magnesium,
they can cause “white powder” problem and give heavy scales on the surface of water basin,
transducer and inner surface of the water tank. Scales on the surface of transducer will unable the unit
work properly.
We recommend:
1) Use cold boiled water or distilled water.
2) Clean the transducer, water tank and basin unit every week.
3) Change the water in water tank more often to keep it fresh.
4) Make sure to pull out the water from the water tank and dry the water basin before you store the
unit unused for a long period of time.
5) Clean the whole unit, and make sure that all parts of the unit are dried completely before unused
for longer period of time.
6) Do not use the chemical for cleaning.
How to clean the transducer:
1) Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5 minutes;
2) Brush out the scale on the surface.
3) Rinse the transducer with clean water.
How to clean the basin unit:
1) Cleaning the water basin with soft cloth and the cleaning abluent if there is scale in it.
2) If the scale is covered on the security switch, drop the cleaning abluent on the scale and clean it
out with the brush.
3) Rinsing the water basin with clean water.
DISPOSAL: Do not dispose this product as unsorted municipal waste, collection of such
waste separately for special treatment is necessary.