AIRINNOVATIONS PERSONAL HUMIDIFIER User manual

PERSONAL HUMIDIFIER
ULTRASONIC COOL MIST & LED MOOD LIGHT
USER GUIDE
WARNING
CAUTION
PARTS
READ AND SAVE THESE INSTRUCTIONS: Failure to follow all the instructions may result in electrical shock.
• Do not use this unit for any purpose other than described in this manual or packaging.
• Do not use if there is damage to the unit or USB cord.
• Do not use on unstable surfaces.
• Do not leave plugged in when not in use.
• Do not touch plug with wet hands.
• Do not fully immerse the unit or pour water through the mist outlet.
• Do not insert any foreign objects into the mist outlet.
• Do not use anything other than room temperature tap or distilled water.
• DO NOT USE ESSENTIAL OILS.
• Keep out of reach of small children.
• Always insert plug securely into the power source.
• Change water daily.
• Unplug the unit before carrying/moving.
• Dry the unit completely before storage; store in a cool, dry place.
• Do not drop, hit or otherwise subject this product to excessive shock.
INCLUDED:
Humidier,
3 Wick Filters,
USB Cable
VOLTAGE: 5V DC
1. Mist Outlet
2. Lid
3. Power Button
4. Light Button
5. Base
6. Water Reservoir
7. Wick Absorption Pipe
8. Mood Light
9. Wick Filter
10. USB Cable
11. DC Socket
2
1
5
3
4
6
7
8
9
10
11
continued on reverse side
5.5” w x 7” h

USAGE INSTRUCTIONS
CARE & WEEKLY MAINTENANCE
CARE & WEEKLY MAINTENANCE
1. Fill the Water Reservoir with cool, clean water.
2. Secure the Lid by aligning the arrow on the Lid to the arrow marked “Lock” on the Base.
3. LET THE WICK FILTER SOAK 5-10 MINUTES BEFORE USE.
4. Place the Humidier on level surface.
5. Plug into a power source using the USB cable.
6. Press the Power Button to start the mist. Note: Mist may not appear immediately; allow up to 15
minutes for unit to mist. Press the Power Button again to turn off the mist.
7. Press the Light Button to turn on the color changing Mood Light. Press the button again to turn
the light off.
Note: As a safety feature, the humidier will automatically shut off when water is low or empty.
Cleaning the Wick Filter and Wick Absorption Pipe
1. Twist right to unlock the Absorption Pipe and remove Wick Filter. (A)
2. Wash the Wick Filter and inside the Wick Absorption Pipe thoroughly with water.
3. Reset the Wick Filter into the Pipe; twist the Pipe left to lock into the lid. (B)
NOTE: We recommend changing the wick between 30-60 days depending on usage and
water quality (hard water will reduce the wick life). Reduced mist is an indication that the Wick
Filter needs to be replaced.
Cleaning the Nebulizer
Clean the surface of the nebulizer (mist outlet) gently with a cotton swab; do not scrape the
nebulizer with a sharp object. If hard water scale is evident, use a mixture of vinegar and water to
clean the nebulizer and surrounding areas.
Storage
1. Remove the Wick Filter & dry all parts before storing.
2. Store in a cool, dry place.
This product is warrantied to be free from manufacturing defects under normal use and conditions
for 1 year. This warranty requires a copy of your dated proof of purchase. WARRANTY IS VOID IF
THE DEFECT IS DUE TO: Accidental misuse, abuse or neglect, use of essential oils, improper repair,
or failure to follow instructions provided.
Air Innovations® ©2017 Great Innovations, LLC. All Rights Reserved.
www.Air-Innovations.com 844-600-1370
AB
ALWAYS unplug from power source before cleaning. .