Airlink101 AGIGACB User manual

Ver. 1A
PackageContent:
• Gigabit CardbusAdapter
• DriverCD
• QuickInstallation Guide
1
Model#AGIGACB
Section 1
Installing Hardware
Gigabit Cardbus Adapter
Quick Installation Guide
Step 1 Turn on the computer and wait for Windows to boot up.
Step 2 Insert the Cardbus firmly into the Cardbus slot with the LED indicators
facingup.
Step 3 Connectoneendofthe Ethernet cable into an available switch/router port
and connect the other end of the cable into the RJ-45 port of the Cardbus.
Step 4 Follow the instructions in the next section to install the drivers.
Section 2
Installing Driver
Step 1 At the Found New Hardware Wizard, select Install from a list or
specific location (Advanced) and click Next.
Note: The following stepsand screen shotsare for Windows XP.Stepsfor other
Windows operating systems are included in the User’s Manual on the Driver CD.

Step 2 InserttheprovidedDriver CD intotheCD-ROM drive.
Step 3 Verify Search for the best driver in these locations is selected, and
select the Include this location in the search check box and click Browse.
Browse to the CD-ROM drive and select the WinXP folder. Click Next to continue.
Step 4 Click Continue Anyway at the Windows Logo Testing prompt.
Step 5 Click Finish to complete the driver installation.
Section 3
Technical Support
E-mail:[email protected]
TollFree: 1-888-746-3238
WebSite:www.airlink101.com
Copyright©2004AirLink101.Allrightsreserved.AirLink101,thestylizedAirLink101logo,specificproductdesignations,andallotherwords
andlogosthatareidentifiedastrademarksand/orservicemarksare, unless noted otherwise, thetrademarksandservicemarksof AirLink101.
Allother product or service names are the property of theirrespectiveholders.AirLink101productsareprotectedunder numerous U.S. and
foreignpatents and pending applications, mask work rights, and copyrights.