Airlink101 Golden N AWLL6075 User manual

Quick Installation Guide
Golden N Wireless Mini USB Adapter
Model # AWLL6075
Install the Wireless USB Adapter
This Quick Installation Guide only provides the basic installation
instructions. For detailed installation instructions on advanced features,
please refer to the User’s Manual on the provided CD.
For Macintosh users, you can find the software and installation instructions
for MAC under the MAC folder on the provided CD.
Step 1.1 Insert the USB adapter into an available USB port of your
computer.
Step 1.2 Click Cancel when you see the Found New Hardware Wizard.
Insert the Installation CD in the CD drive. Continue to Step 1.3.
Section 1
Package Contents:
•Golden N Wireless Mini
USB Adapter
•Driver & Utility CD
•Quick Installation Guide
Ver. 1.2 Windows Vista/7 Users:
Windows XP/2000 Users:

Step 1.3 The Autorun screen will pop up. Select Install Utility and Driver
from the menu.
Windows Vista/7 Users:When you get warning message(s), make sure
that you give permission to continue with the installation of the driver
software.
Step 1.4 Click Next and follow the instructions on the window to finish
installation.
Step 1.5 Give Permission to Window to install the driver software.
Windows Vista/7 Users: Click the Install this driver software anyway.
Windows XP/2000 Users: Click Continue Anyway at the Windows Logo
Screen.

You will see the following message when it is installing the driver for
Airlink101 Wireless Adapter and the Airlink101 Wireless Monitor.
Step 1.6 Select Yes, I will restart my computer now. Click Finish to
complete the installation.

Connect to the Wireless Network
For Windows 7 Users:
You will need to use the utility built in Windows 7 to manage this wireless
USB adapter. Currently, Airlink101 Wireless Monitor does not support
Windows 7.
Step 2.1 Click on the wireless icon in the system tray at the bottom right-
hand corner of your screen. A list of available network will pop up. Select
the one you want to connect to and click Connect.
Section 2 Step 2.2 Enter the network security key if the wireless network you are
attempting to connect to has wireless encryption enabled. Click OK. The
connection should be now established.
For Windows Vista/XP/2000 Users:
Open the Airlink101 Wireless Monitor utility by double clicking on the
Airlink101 Wireless Monitor Utility icon in the system tray at the bottom right-
hand corner of your screen.

Step 2.1
The Easy Setup Button (WPS) is a new and easy way to configure the
encryption for your wireless network clients. In order to use it, you need to
have a router that supports this feature.
If your router doesn’t support this feature, continue to Step 2.2.
1. Push the Easy Setup Button (WPS Button) on the Adapter and hold it
until the following window pops up.
2. Push the Easy Setup Button (WPS Button) on the Router. The picture
shows Airlink101 AR675W Wireless N Green Router.

3. The router will now start the handshake with the wireless Adapter. The
connection will be established within 2 minutes. Continue to Step 2.4.
If the connection is not able to establish, continue to Step 2.2.
Step 2.2 Click the Available Network tab of the Wireless Monitor, select
the SSID (Network Name) of the wireless network that you wish to connect
to, and click Add to Profile.
Step 2.3 Enter the wireless security key into the Network Key box if the
network you are attempting to connect has wireless security enabled. Click
OK.

Step 2.4 The connection should be now established. Verify that IP
Address,Subnet Mask and Gateway have valid numbers assigned to
them (instead of all 0’s). The Status should be Associated, and there will be
green bars next to Signal Strength and Link Quality. If you are experiencing problems with the connection (unable to connect,
low signal strength, slow connection speed, not working, unstable wireless
connection) you may want to tune your router’s signal by changing the
channels on the router and/or by adjusting the direction of the antenna(s).
You do not need to change the channel on the Adapter; it will automatically
pick up the new channel after you reboot the router.
Your router has 11 different channels to choose from. Start from channel 1
and work your way up. Each time you change the channel on the router,
make sure that you restart the computer that is connected to the router
before trying to connect again. Keep going through the channels until you
find one that gives you a stable connection.
For instructions on changing channels, refer to the documentation that
comes with the router.
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
Website: www.airlink101.com
Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual
data throughput will vary. Network conditions and environmental factors, including volume of network
traffic, building materials and construction, mix of wireless products used, radio frequency
interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual
data throughput rate. Compatibility with 802.11n devices from other manufactures is not guaranteed.
Specifications are subject to change without notice. Photo of product may not reflect actual content.
All products and trademarks are the property of their respective owners. Copyright ©2010 Airlink101®
Section 3
Troubleshooting