Airlink101 AWLC3026T User manual

Ver. 1A
Package Content:
•Cardbus Adapter
•Driver&UtilityCD
•Quick Installation Guide
Model#AWLC3026T
Section 1
Install Utility and Driver
Quick Installation Guide
802.11g CardBus Adapter
This Quick Installation Guide only provides the basic instructions. For more
advancedfeatures, pleaserefer tothe User’sManual inthe providedCD.
Note: DonotinserttheCardbus Adapteruntil youhave reachedthe appointed
step.
For Windows 98SE and ME users, you may be prompted to insert the Windows
98SE or ME CD during the driver installation. Be sure to have your Windows 98SE
or ME CD ready.
Note: IftheAutorun screendoesn’t appearautomatically go toStart, Run,and
type D:\autorun.exe (whereD isthe letterofyour CDdrive) and clickOK.
Step 1 Insert the Driver & Utility CD into your CD drive and select Install Utility
and Driver from the menu.
Step 2 Click Next at the welcome screen.
Step 3 Click Next to accept the default destination folder.

Continue on back...
ContinueonBack
Step 5 Verify Yes, I want to restart my computer now is selected and click
Finish to restart your computer.
Step 4 Click Continue Anyway at the Windows Logo Screen.
(For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 7 Select Install the software automatically and click Next.
Step 8 Click Continue Anyway at the Windows Logo Screen.
(For Windows 2000, click Yes at the Digital Signature Not Found prompt).
For Windows 98SE and ME, select Search for the best driver for your device
and click Next. Verify all the check boxes are checked and click Next.
Step 9 Click Finish. (Restart the computer for Windows 98SE and ME).
Step 6After your computer is restarted, insert the CardbusAdapter.

Section 3
Section 2
Configure the Cardbus Adapter
To open the CardbusAdapter’s utility go to Start > (All) Programs > Airlink101
802.11g CardBus Utility > Airlink101 802.11g CardBus Utility.
Step 1 Go to the AP List tab, select the SSID (Network Name) of the wireless
network you wish to connect to, and click Connect.
Step 2 If encryption is not enabled for the selected access point / router, skip to
step 6. Otherwise, enter a Profile Name for your wireless setting and click Next.
Step 3 Verify that the Network Name matches the SSID of your wireless network
and click Next.

E-mail:[email protected]
TollFree:1-888-746-3238
WebSite: www.airlink101.com
Section 3
Technical Support
Section 4
Step 4 Select the proper encryption setting for your wireless router or access
point from the drop-down menu and click Next.
Step 8 Verify thatyou are receivingadequate SignalStrengthand Link Qualityand
that you have been assigned a valid IP address (instead of all 0’s). If all 0’s, please
repeat step 1 - 5.
Step 5 Follow the on-screen instructions to complete the encryption settings.
Click Complete when finished.
Copyright©2005AirLink101.Allrightsreserved.AirLink101,thestylizedAirLink101logo,specificproductdesignations,andallotherwords
andlogosthatareidentifiedastrademarksand/orservicemarksare, unless noted otherwise, thetrademarksandservicemarksof AirLink101.
Allother product or service names are the property of theirrespectiveholders.AirLink101productsareprotectedunder numerousU.S. and
foreignpatents and pending applications, mask work rights, and copyrights.
*Theoreticalmaximum wireless signal rate based on IEEE standard802.11gspecifications.Actual datathroughputwillvary.Network conditions
andenvironmental factors, including volume of network traffic, building materials and construction,mixofwirelessproductsused,radio
frequencyinterference (e.g., cordless telephones and microwaves)aswellasnetwork overhead lower actual data throughputrate.
Step 6 You should see a blue circle around the antenna icon indicating a valid
connection.
Step 7 Go to the Link Information tab and click on the More button.