AirLive MU-7000AV User manual

MU-7000AV
3.5" Network Multimedia Player
User’sManual

Clause Description
■ EN 55022:1998/A1 Limits and methods of measurement of radio disturbance
:2000/A2:2003 characteristics of information technology equipment
■ EN 61000-3-2:2000/ Disturbances in supply systems caused by household appliances
A1:2001/A2:2005 and similar electrical equipment "Harmonics"
■ EN 61000-3-3:1995/ Disturbances in supply systems caused by household appliances
A1:2001/A2:2005 and similar electrical equipment "Voltage fluctuations"
■ EN 55024:1998/A1 Information Technology equipment-Immunity characteristics-Limits
:2001/A2:2003 And methods of measurement
■ CE marking
Signature：
Name ：Albert Yeh
Position/ Title : Vice President Date： 2007/4/30
(Stamp)
MU-7000AV
is in conformity with
In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive
Manufacturer/Importer
Hsin-Tien City, Taipei County, Taiwan
Declare that the product
3.5" Network Multimedia Player
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd.,

MU-7000AV CE Declaration Statement
Country Declaration Country Declaration
cs
Česky [Czech]
OvisLink Corp. tímto prohlašuje, že tento U-
7000AV je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice
1999/5/ES.
lt
Lietuvių
[Lithuanian]
Šiuo OvisLink Corp. deklaruoja, kad šis U-7000AV
atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
da
Dansk [Danish]
Undertegnede OvisLink Corp. erklærer herved,
at følgende udstyr U-7000AVoverholder de
væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
nl
Nederlands [Dutch
Hierbij verklaart OvisLink Corp. dat het toestel U-
7000AV in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn
1999/5/EG.
de
Deutsch
[German]
Hiermit erklärt OvisLink Corp., dass sich das
Gerät U-7000AVin Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie
1999/5/EG befindet.
mt
alti [ altese]
Hawnhekk, OvisLink Corp, jiddikjara li dan U-
7000AV jikkonforma mal-ħtiġijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
et
Eesti [Estonian]
Käesolevaga kinnitab OvisLink Corp. seadme
U-7000AV vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
hu
agyar
[Hungarian]
Alulírott, OvisLink Corp nyilatkozom, hogy a U-
7000AV megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
en
English
Hereby, OvisLink Corp., declares that this U-
7000AV is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
pl
Polski [Polish]
Niniejszym OvisLink Corp oświadcza, że U-7000AV
jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy
1999/5/EC.
es
Español
[Spanish]
Por medio de la presente OvisLink Corp. declara
que el U-7000AVcumple con los requisitos
esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
pt
Português
[Portuguese]
OvisLink Corp declara que este U-7000AVestá
conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
el
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ
ΟΤΙ U-7000AV ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1999/5/ΕΚ.
sl
Slovensko
[Slovenian]
OvisLink Corp izjavlja, da je ta U-7000AV v skladu
z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
fr
Français [French]
Par la présente OvisLink Corp. déclare que
l'appareil U-7000AV est conforme aux
exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE
sk
Slovensky [Slovak]
OvisLink Corp týmto vyhlasuje, že U-7000AV spĺňa
základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
it
Italiano [Italian]
Con la presente OvisLink Corp. dichiara che
questo U-7000AV è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
fi
Suomi [Finnish]
OvisLink Corp vakuuttaa täten että U-7000AV
tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen
lv
Latviski [Latvian]
Ar šo OvisLink Corp. deklarē, ka U-7000AV
atbilst Direktīvas 1999/5/EK būtiskajām prasībām
un citiem ar to saistītajiem noteikumiem.
Íslenska [Icelandic]
Hér með lýsir OvisLink Corp yfir því að U-7000AV
er í samræmi við grunnkröfur og aðrar kröfur, sem
gerðar eru í tilskipun 1999/5/EC.
sv
Svenska
[Swedish]
Härmed intygar OvisLink Corp. att denna U-
7000AV står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv
1999/5/EG.
no
Norsk [Norwegian]
OvisLink Corp erklærer herved at utstyret U-
7000AV er i samsvar med de grunnleggende krav og
øvrige relevante krav i direktiv 1999/5/EF.
A copy of the full CE report can be obtained from the following address:
OvisLink Corp.
5F, No.6 Lane 1 0,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan, R.O.C.
This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, T, NL, PL, PT, SK,
SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR

MU-7000AV
User’s Manual
FCC COMPLIANCE STATEMENTS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the Distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
TRADEMARKS
MS-DOS, Windows, Windows 95/98/NT/2000/me/XP are trademarks of Microsoft Corporation.
Macintosh and Mac are trademarks of Apple Computer
*All of the third-party brands and names are the property of their respective owners.
AirLive Mu-7000AV User’s Manual

Table of Contents
Table of Contents
1. Before You Get Started .......................................................................................................... 1
1.1 Safety Instructions........................................................................................................ 1
1.2 Preliminary Tools.......................................................................................................... 1
1.3 Take a look to the MU-7000AV..................................................................................... 1
2. Easy Installation Guide .......................................................................................................... 2
2.1 Package Contents......................................................................................................... 2
2.2 Specifications................................................................................................................ 2
2.3 Supported Hard Disk Formats ..................................................................................... 2
2.4 Minimum System Requirements.................................................................................. 2
2.5 Supported Media Playback Formats........................................................................... 2
2.6 Hardware Installation.................................................................................................... 3
3. Using MU-7000AV ................................................................................................................... 3
3.1 USB Enclosure.............................................................................................................. 3
3.1.1 USB OTB (One Touch Backup).........................................................................3
3.2 Media File Playback Mode............................................................................................ 4
3.2.1 MU-7000AV Firmware Upgrade.........................................................................4
3.2.2 TV Lock Function...............................................................................................4
3.3 LAN Share Device Setup Overview ( NDAS Mode ) ................................................... 5
3.4 Switching between Media File Playback Mode and NDAS mode ............................. 5
4. Remote Control Features....................................................................................................... 6
5. Starting Quick Media Play...................................................................................................... 8
5.1 PHOTO PLAY MODE ..................................................................................................... 8
5.2 MUSIC PLAY MODE..................................................................................................... 10
5.3 VIDEO PLAY MODE..................................................................................................... 11
5.4 FILE LIBRARY.............................................................................................................. 12
5.5 OTHER SETUP............................................................................................................. 12
6. Network Hard Disk ( NDAS Mode )...................................................................................... 13
6.1 Use With NETDISK Mode in Windows System......................................................... 13
6.1.1 Install LAN Share Device Management in Windows XP、Windows 2000
and Server 2003.........................................................................................................13
6.1.2 Install NDAS Device Management in Windows ME and Windows 98SE.....13
6.1.3 NDAS Administrator.........................................................................................14
6.1.4 Add / Register a New NDAS Device using the Registration Wizard............14
6.1.5 Add / Register a New NDAS Device without using the Registration
Wizard.........................................................................................................................15
6.1.6 Found New Hardware Wizard..........................................................................15
6.1.7 Sharing NDAS Device......................................................................................16
6.2 Introduction to NDAS Device Management.............................................................. 17
6.2.1 NDAS Device Status Modes............................................................................17
i AirLive MU-7000AV User’s Manual

Table of Contents
6.2.2 NDAS Device Management..............................................................................17
6.3 NDAS Device Functions............................................................................................. 18
6.3.1 NDAS Device Management..............................................................................18
6.3.2 Changing from Read/Write Mode to Read-Only Mode..................................19
6.3.3 Changing from Read Mode to Read/Write Mode...........................................19
6.4 Use With LAN Share Mode in Mac OS X ................................................................... 20
6.4.1 Install NDAS Device Management.............................................................20
6.4.2 Add / Register NDAS Device......................................................................20
6.4.3 Using NDAS Device Admin .............................................................................20
6.4.4 Using NDAS Device..........................................................................................21
6.4.5 Uninstall NDAS............................................................................................21
6.5 NDAS Bind Management............................................................................................ 22
6.5.1 Bind ...................................................................................................................22
6.5.2 Unbind...............................................................................................................23
6.6 Other NDAS Bind Management Functions ............................................................... 25
6.6.1 Add Mirror.........................................................................................................25
6.6.2 Migrate...............................................................................................................25
6.6.3 Replace Device.................................................................................................25
6.6.4 Replace HDD.....................................................................................................25
6.6.5 Add Spare Disk.................................................................................................25
6.6.6 Remove Spare Disk..........................................................................................26
6.6.7 Using Mirrored NDAS Devices........................................................................26
6.7 Formatting NDAS Device............................................................................................ 27
6.7.1 Initialize NDAS Device .....................................................................................27
6.7.2 Partition NDAS Device.....................................................................................27
6.7.3 Format NDAS Device Through My Computer................................................27
6.8 Uninstall....................................................................................................................... 28
6.9 Use NDAS Device in Linux......................................................................................... 28
7. FAQ......................................................................................................................................... 29
ii
AirLive Mu-7000AV User’s Manual

1. Before You Get Started
1. Before You Get Started
1.1 Safety Instructions
1. Always unplug the power cord before inserting Hard Drive.
2. Using a power supply with a different voltage rating will damage the product and void its warranty.
3. Keep this equipment away from humidity or any type of moisture.
4. Do not drop or shack the device.
5. Do not press or put any weight on the device.
6. Do not clean the device with alcohol, thinner or benzene.
1.2 Preliminary Tools
To install Hard Drive into your MU-7000AV, you need a cross screwdriver for following procedures.
1.3 Take a look at the MU-7000AV:
1 AirLive Mu-7000AV User’s Manual

2. Easy Installation Guide
2. Easy Installation Guide
2.1 Package Contents
MU-7000AV x 1
Power Adapter x 1、Power Adapter Cable x 1
Audio cable x 1、Video cable x 1
USB cable x 1、Ethernet Cable x 1
Remote control
User Manual x 1、Software Installation CD x 1
2.2 Specifications
Application：Any 3.5 inch hard disk (IDE interface)
OutputPort：Composite video（NTSC/PAL）、S-video（NTSC/PAL）、Stereo Audio jack
2.3 Supported Hard Disk Formats
USB Enclosure：FAT32、NTFS
Media File Playback Mode：FAT32 only
NDAS Mode：FAT32、NTFS
2.4 Minimum System Requirements
Windows® 98SE / ME / 2000 / XP / Server 2003（32bit）
233 MHz Pentium® II or higher
128 MB RAM (256 MB recommended)
USB 1.1 Port (USB 2.0 recommended)
CD-ROM drive for installation
100Base-T full duplex switch for NDAS mode
Mac® OS
Mac OS X 10.3 or greater
128 MB RAM (256 MB recommended)
USB 1.1 Port (USB 2.0 recommended)
CD-ROM drive for installation
100Base-T full duplex switch for NDAS mode (for Lan Share Only)
2.5 Supported Media Playback Formats
Video：MPEG1（VCD、SVCD、DAT）、MPEG2（AVI、VOB）、MPEG4（AVI、DivX、XviD）
Subtitle：ass、psb、smi、ssa、srt、sub-txt
Music：MP3
Photo：JPEG
2
AirLive Mu-7000AV User’s Manual

2. Easy Installation Guide // 3. Using MU-7000AV
2.6 Hardware Installation
Step1 Step2
Step3 Step4
3. Using MU-7000AV
3.1 USB Enclosure
1. Connect the power cable then power on it (push the power button for 2~4 seconds).
2. Connect the USB cable to your computer.
3. When your hard disk is detected by your computer, LED1 is on.
3.1.1 USB OTB (One Touch Backup)
1. Install the Setup_v1.5.exe from OTB in the Software Install CD.
2. Setup the folder or partition you want to copy, and push the button. The OTB function will start
automatically.
Note
：If you plug the MU-7000AV into computer with USB, media file playback and NDAS
will not work.
3AirLive MU-7000AV User’s Manual

3. Using MU-7000AV
3.2 Media File Playback Mode
1. Please connect the Audio and Video cables between MU-7000AV and TV as shown in the figure
below.
2. Please plug in the power adaptor and power on your TV.
3. Please change your TV mode to AV mode.
4. Push the POWER button for 2~4 seconds.
5. Now, you can enjoy it.
※ Note：If your image and subtitle are separated, please put them in the same folder and then
copy to your MU-7000AV. Remember that the image and the subtitle must have the
same filename.
3.2.1 MU-7000AV Firmware Upgrade
1. Please copy the new firmware file that you want to update from CD to your first partition of the hard
disk. (Please confirm that the first partition is FAT32.)
2. Please connect the Video and power cable, and power on the MU-7000AV.
3. Enter the TV mode, and move your cursor on the new firmware “Mu7000.rom”.
4. Push the “OK” key to enable the upgrade procedure.
※Attention：Do not turn off the power when firmware upgrade procedures are under processing.
It will fail upgrade procedures and damage the MU-7000AV.
5. When the upgrade screen is gone, it means firmware upgrade has already finished.
3.2.2 TV Lock Function
1. This function will only lock the second partition if there are several partitions in your hard disk. You
cannot enter the partition unless input correct password.
2. The screen will display a keyboard when you want to enter locked partition, Please input the default
password (the default password is 0000）when you use this function for the first time.
3. Please use the up、down、left、right and play key on the remote control to move or execute input
function.
4. If you want to change the password, please choose the change key in the keyboard. Input the old
password and then input the new password, then press OK. Now the new password is that you want
4
AirLive Mu-7000AV User’s Manual

3. Using MU-7000AV
3.3 LAN Share Device Setup Overview ( NDAS Mode )
1. Connect the included Ethernet cable from the Ethernet port on LAN Share to a switch (100 Base-T).
2. Wireless users: Connect LAN Share to your wireless router or access point with included Ethernet cable.
3. Make sure the power connector is firmly attached to the LAN Share and connect the power adapter to
a power source.
3.4 Switching between TV Mode and NDAS mode
Push the “Power” button on the MU-7000AV or the remote control, then the LED will light up between “MP4”
and “NET HDD“. When the “MP4” LED is on, Media File Playback mode is active. When the
“NET HDD” LED is on, NDAS mode is active.
5AirLive MU-7000AV User’s Manual

4. Remote Control Features
4. Remote Control Features
Key pad Function Description
OK Plays or executes the current selection.
UP Moves the cursor up on the screen.
DOWN Moves the cursor down on the screen.
LEFT Moves the cursor left on the screen.
RIGHT Moves the cursor right on the screen.
PHOTO PHOTO Mode.
MUSIC MUSIC Mode.
VIDEO VIDEO Mode.
FILE FILE Mode.
MAIN
MENU Go to the main menu.
SETUP Setup and customize the settings of MU-7000AV.
INFO See the information of the file.
REV Fast reverse in Music or Video.
PAUSE Interrupts file playback.
FWD Fast forward in Music or Video.
LASTPAGE Jump to last page.
PLAY Continue play back.
NEXTPAGE Jump to next page.
PREVIEW Previous file.
STOP Terminate the selected mode.
NEXT Next file.
VOL+ Increase the volume.
VOL - Decrease the volume.
MUTE Turn off the sound.
AUDIO Choose the sound channel.
REPEAT Repeat setup when photo、music
and video are playing.
SLIDESHOW Music playback under slideshow
with photo.
ROTATE Rotate the photo.
ZOOM Zoom-in control (1x, 3x, off)
TRANSITION Allows you to choose the sound
mode.
TV/VGA Change display between VGA
and TV
6
AirLive Mu-7000AV User’s Manual

4. Remote Control Features
PLAY/OK Takes you to play or execute the current selection.
UP Direction button to move cursor on the screen.
DOWN Direction button to move cursor on the screen.
LEFT Direction button to move cursor on the screen.
RIGHT Direction button to move cursor on the screen.
MAIN
MENU Takes you to the main menu.
POWER Power switch
7AirLive MU-7000AV User’s Manual

5. Starting Quick Media Play
5. Starting Quick Media Play
To start Quick Media Play, do the followings：
1. Press ’Setup’ button to enter the SETUP MENU-MAIN PAGE.
2. Choose ’Preferences’ and check ’TV TYPE’ is ’MULTI SYSTEM’ or not
3. After setup, choose ’Exit Setup’ return to main menu.
Notes：
1. Default setup of TV type is MULTI SYSTEM.
2. MULTI SYSTEM includes NTSC type and PAL type.
3.NTSC（Taiwan, US, Japan…etc）
4.PAL（Mainland China / European countries）
5.1 PHOTO PLAY MODE
You can press arrow key to select ’PHOTO’ mode in MAIN MENU or press ’PHOTO’ on the remote control,
or you can press ’FILE’ to enter ’ File Library’ to search the file you want to play.
FULL SIZE DISPLAY
You can press ’ OK’ button on the remote control to
show the Full-size picture. The screen will be shown as right.
ZOOM IN DISPLAY
You can press ’Zoom’ button on the remote control to zoom in the picture and press ’Zoom’ button again to
disable. You can press arrow keys to move picture. The screen will be shown as below.
Zoom Off Zoom In × 1 Zoom In × 3
ROTATE SIDPLAY
You can press ’ROTATE’ button on the remote control to rotate the picture in clockwise direction.
8
AirLive Mu-7000AV User’s Manual

5. Starting Quick Media Play
SLIDE SHOW SETUP
Press ’Setup’ button to enter the SETUP MENU-MAIN PAGE and select SLIDESHOW SETUP for
play-mode selection.
MANUAL：You must press ’▲’ or ’▼’button to change your picture.
AUTO：Pictures will change automatically.
FOLDER REPEAT
This item can setup folder repeat in slideshow.
Press ’▲’ or ’▼’button on the remote control to
select your play mode.
ON：All photo files display automatically.
OFF：Single photo file display automatically.
INTERVAL TIME
This item can setup interval time between every picture
Press ’▲’ or ’▼’ button on the remote control to select
slideshow interval time
TRANSITION
This item can setup transition between every picture, there are fourteen items let you to choose.
9AirLive MU-7000AV User’s Manual

5. Starting Quick Media Play
FULL SCREEN：Change picture with full screen.
TOP->BOTTOM：Change picture from top to bottom.
BOTTOM->TOP：Change picture from bottom to top.
T/B->CENTER：Change picture from top and bottom to center.
CENTER->T/B：Change picture from center to top and bottom.
BLIND:T->B：Change picture from top to bottom like blind.
LEFT->RIGHT：Change picture from left to right.
RIGHT->LEFT：Change picture from right to left.
L/R->CENTER：Change picture from left and right to center.
CENTER->L/R：Change picture from center to left and right.
IMPLODE：Change picture from around to center.
BLIND:L->R：Change picture from left to right like blind.
CROSS FADE：Change picture cross fade.
RANDOM：Change picture in random mode.
AUTO START
This item allows you to play your video files without going to MAIN MENU
Press ’▲’ or ’▼’ button on the remote control to select your play mode.
ON：Video file will play automatically when you power on MU-7000AV.
OFF：You must play video file manually.
5.2 MUSIC PLAY MODE
MUSIC mode allows you to view your MP3 files.
You can press arrow key to select ’MUSIC’ mode in MAIN MENU or press ’MUSIC’ on the remote control, or
you can press ’FILE’ to enter ’ File Library’ to search the file you want to play.
PLAYBACK
Press ’▲’ or ’▼’button on the remote control to select the file you want to play.
You can press ’EQ’ button on the remote control to change the EQ mode.（Classic、Jazz、Rock、PoP、
Ballad、Dance）
10
AirLive Mu-7000AV User’s Manual

5. Starting Quick Media Play
REPEAT PLAY
Press ’Setup’ button to enter the SETUP MENU-MAIN PAGE and select MUSIC SETUP to select your play
mode.
You can press ’▲’ or ’▼’button on the remote control to select your play mode
ONE：The same song will play repeatedly.
OFF：Music will stop to play when songs played once
from first to last.
ALL：All songs will repeatedly play continued.
5.3 VIDEO PLAY MODE
VIDEO mode allows you to view your video files.
You can press arrow key to select ’VIDEO’ mode in MAIN MENU or press ’VIDEO’ on the remote control, or
you can press ’FILE’ into’ File Library’ to search the file you want to play.
●Pause or start/resume playback, press the button ’PAUSE’ on your remote control.
●Stop playback, press the button ’STOP’ on your remote control.
●To move to previous video file, press the button ’PREVIOUS’ or ’REV’ on your remote control.
●To move to next video file, press the button ’NEXT’ or ’FWD’ on your remote control.
11 AirLive MU-7000AV User’s Manual

5. Starting Quick Media Play
5.4 FILE LIBRARY
File library allows you to view all your media files and browse your play list.
●Use the arrow keys on your remote control to quick search the file you want to play.
●Press ’OK’ button on your remote control to play the file
DELETE、RENAME、NEW FOLDER、CANCEL
Press ’ INFO’ button on the remote control in the file library, you
can delete、rename the file and folder, you also
can create a new folder.
DELETE：Delete file.
RENAME：Create new file name of file.
NEWFOLDER：Create a new folder.
CANCEL：Cancel the function that you want to do
5.5 OTHER SETUP
You can execute the setup of OSD LANG、OSD MESSAGE and SETUP VALUES in PREFERENCES
PAGE.
OSDLANG：Choose the language that you want to use.
PREVIEW：Preview window on/off.
OSD MESSAGE：Turn on or turn off OSD MESSAGE.
Notes：If you turn on this item, you can see the icon at your TV upper left corner when you execute REV
or FWD function.
SETUP VALUES：Setup VALUES in default mode.
Notes：If you execute this item, all setup values will return to default values.
12
AirLive Mu-7000AV User’s Manual

6. Network Hard Disk (AirLive NDAS Mode)
6. Network Hard Disk (AirLive NDAS Mode)
6.1 Use With NETDISK Mode in Windows System
6.1.1 Install LAN Share Device Management in Windows XP、Windows 2000 and Server 2003
1. Find NDAS control AP in the driver CD, double click setup.exe, than choose the language what
you need
2. Install Shield Wizard will appear. Click the Next button to continue to next step.
3. Accept License Agreement and the click Next to continue installation.
4. Click the Install button to install drivers.
5. Click Continue Anyway to continue installation.
6. Click the Finish button to complete.
7. Click on the Yes button to restart your computer now, or No to restart later.（Propose reboot）
6.1.2 Install NDAS Device Management in Windows ME and Windows 98SE
1. Find the LAN Share control AP from the driver CD, double click it and start to install.
2.Install Shield Wizard will appear，click Next.
3.SelectI accept the terms in the license agreement, then click Next.
4.ClickInstall.
5. Put in the Windows 98SE CD, click OK.
6.SelectYes, I want to restart my computer now then click Finish restart the computer.
13 AirLive MU-7000AV User’s Manual

6. Network Hard Disk (AirLive NDAS Mode)
7. If this is your first time installing LAN Share, Add New Hardware Wizard will appear. Click Next
and follow further instructions. Otherwise, MU-7000AV will be listed as a local drive on My Computer.
Driver letter and name may vary between Personal Computers.
8.SelectSearch for the best driver for your device. Click Next.
9.SelectSpecify a location and click Browse button. From the Browse for Folder window, search for
NDASUSB folder and click OK. Once the location is set, click Next from the Add New Hardware
Wizard window.
10. Click Next.
11.Driver has been successfully installed, click Finished.
6.1.3 NDAS Administrator
When software installation is completed, you will find a NDAS Launcher Icon on your desktop screen and
a NDAS Administrator Tool icon on the system tray.
1. NDAS Launcher (desktop icon) activates and loads the NDAS Administrator Tool onto the system tray.
2. NDAS Administrator Tool (system tray icon) performs the following functions：
- Refresh NDAS Status - Enable Read Only Access
-AddaNDAS -DisableaNDAS
-DisplaySoftwareVersion -EditNDASName
- Enable Read / Write Access - Display NDAS Properties
6.1.4 Add / Register a New NDAS Device using the Registration Wizard
1. Click on the NDAS Device Management Icon located on the system tray.
2.SelectRegister A New Device.
3.NDAS Device Registration Wizard will appear. Click Next to continue.
4. Enter a name for the NDAS Device and click Next.
5. Add your NDAS Device ID and Write Key. Write Key is needed to write to NDAS Device. Click
Next to continue.
- If the Write Key was entered in the previous step, the NDAS is registered as Read / Write Mode.
- If the Write Key was not entered in the previous step, the NDAS is registered as Read Only Mode.
Note: NDAS Device ID and Write Key do not contain the letter O. Please use the number 0 for all
letter0’s.
14
AirLive Mu-7000AV User’s Manual