Kvarta DVB Streamer User manual

www.kvarta.net
DVB Streamer Quick Start Guide
DVB Streamer
Quick Start
1. Unpacking
Check that all these accessories are present:
1 power supply
1 straight ethernet cable
1 quick start notice
2. Connecting to the embedded Web site
1. Connect the Ethernet cable between the RJ45 and the network..
2. Default IP: 192.168.2.3 (admin/admin)
NOTE: Your computer should be in the same network.
3. Open a Web browser (Internet
Explorer, Mozilla…) and enter
the device IP address. Login with
the default username and
password (admin/admin). The home page of the
embedded web site is displayed:
3. Configuring the DVB settings
On the embedded web site home page, click “DVB -> Configuration”:


www.kvarta.net
DVB Streamer Quick Start Guide
4. Look at current DVB status for RF parameters
On the embedded web site go to “DVB”> “Status”. If everything is OK the Demodulator
should be locked as in the picture below
5. Configure the IP Stream
On the embedded web site go to “DVB”> “Stream”
Select the Stream protocol
Select the Service
Select the destination address
Please check the user manual for more information on how to communicate with your
device and how to configure it.