Airmax 652699 User manual

OWNER’S MANUAL
airmaxeco.com | 866-424-7629 | P.O.Box 38 | Romeo, MI 48065
RGBW LED
Light Remote
Important Information ......................2
Technical Specs .............................2
Pairing & Using Your Remote .................3
Maintenance ...............................4
Warranty Information .......................4
Table of Contents:
• RGBW LED Light Remote
(Item #652699)

IMPORTANT INFORMATION
Please read these instructions thoroughly before use. Failure to follow instructions
may result in equipment damage or failure, losses, injury or death.
CAUTION
To reduce the risk of equipment damage or failure:
• During freezing temperatures, remove and store inside..
TECHNICAL SPECS
The Airmax®Color-Changing RGBW LED Light Set is run by a wireless remote with
a range of up to 200ft. The wireless remote allows you to change the color, dim/
brighten the lights, control flash speed and run up to 9 preset programs.
Requires: 2 AAA Batteries (Included).
2
IMPORTANT: Airmax®, Inc. is not responsible for equipment damage or failure,
losses, injury or death resulting from failure to follow safety precautions, misuse
or abuse of equipment.
Color Ring
Brightness
Indicator
Master On
Speed -
Zone On
Zone Off
Zones
Master Off
Speed +
Modes
(Programs)
Indicator
airmaxeco.com | 866-424-7629
2

PAIRING YOUR REMOTE & FOUNTAIN
Step 1 Choose which zone you want to assign the lights (1 to 4).
Step 2 Switch o the main power supply of the lights in the selected zone
with the main switch or pull the plug from the socket.
Step 3 Switch the lights on again and within 3 seconds shortly press one of
the “Zone On” buttons, one time, on the remote control.
Step 4 When the link operation is successful, the lights will slowly blink on
and o 3 times.
BASIC CONTROL FUNCTIONS
• Press and Hold Master ON or ZONE ON for several seconds to turn all
lights to white mode.
• Touch the color ring to adjust lights to any color.
• Change the brightness by using the brightness slide ring.
• Adjust flash speed for any preset program using the speed buttons.
Preset Programs/Modes
Press the “M” Mode button to scroll through the pre-programmed light settings.
Program 1 - RGBW Fade In/Fade Out Fades in and fades out the color red, green,
blue and white one after another.
Program 2 - Color Flash Red, green, blue, white, yellow and purple flashes.
Program 3 - Disco Multiple colors strobe and flash.
Program 4 - Red Color Ramp Up and Flash Red color brightens from 0%‐100%
and shuts down, then flashes three times.
Program 5 - Green Color Ramp Up and Flash Green color brightens from
0%‐100% and shuts down, then flashes three times.
Program 6 - Blue Color Ramp Up and Flash Blue color brightens from 0%‐100%
and shuts down, then flashes three times.
Program 7 - Color Change and Flash Several colors fade into each other and then
flash randomly.
Program 8 - Fade In/Fade Out Several colors fade into each other.
Program 9 - Strobe White White color flashes.
3
P.O.Box 38 | Romeo, MI 48065 3

MAINTENANCE
• Replace batteries as needed.
• Store indoors during freezing temperatures
WARRANTY
Airmax® RGBW LED Light Remotes carry a 1-year warranty. Airmax® will repair or replace
any remote found to be defective. This limited warranty is extended exclusively to the
original purchaser and begins from the date of original shipment. Abuse, misuse or
alterations of this product void all warranty. Please contact your local dealer to obtain a
Return Merchandise Authorization (RMA) Number prior to returning any product. Failure to
request an RMA number may result in delay or dismissal of your warranty claim.
airmaxeco.com | 866-424-7629 | P.O.Box 38 | Romeo, MI 48065
4