AIROCIDE APS-200 User manual

Important Safety InformatIon
READ AND SAVE THESE INSTRUCTIONS
The Airocide® unit should be used only as recommended in this manual.
Failure to follow recommendations can result in serious injury.
• Keep children away from the unit and supervise them when they are near it.
• Do not drop or insert objects into any openings in the unit.
• Do not disassemble the unit, except for removal of the fascia to replace the Reaction Chambers.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
The Airocide® unit, like all electrical appliances, presents the risk of fire,
electric shock, and the potential for serious injury or death if improperly
used. Always follow these precautions:
• Plug the unit directly into a 220-240V AC electrical outlet. DO NOT use extension cords or adapter plugs.
• This unit has a grounded plug. Use only in a compatible outlet that is installed and grounded in
accordance with electrical codes and ordinances. DO NOT alter the plug or force it into any outlet.
• DO NOT use the unit if the cord or plug are damaged.
• Keep the cord out of heavy trac areas. To avoid re hazard, DO NOT put the cord under rugs,
furniture or appliances, near heat registers, radiators, stoves or heaters.
• DO NOT run the cord under carpeting. DO NOT cover the cord with throw rugs, runners, or
similar coverings. DO NOT route the cord under furniture or appliances. Arrange cord away from
trac areas where it might present a tripping hazard.
• DO NOT immerse the unit in water or other liquids or pour water or liquids on the unit.
• DO NOT use the unit with any solid-state speed control devices, such as a dimmer switch, that
controls power to the unit.
• DO NOT operate the unit where combustible gases or vapors are present.
WARNING:
WARNING:

3

Table
of Contents
Clear Air Revolution 5
How it Works 6
Frequently Asked Questions 11
NASA to Now 12
Warranty 13
Contact Us 14
Reaction Chamber Replacement 19

5
Welcome to the Clear Air Revolution
You just gave yourself and your family an invaluable gift. Clear air. When the air is clear, you are suddenly
elevated. Your home becomes a sanctuary where you have the freedom to enjoy more, do more, play
more and even be more.
We want to thank you for making the incredible decision to join the clear air revolution. More
importantly, every day when you wake up feeling better than you ever thought possible, you’ll thank
yourself for making the clear choice.
In this booklet you will nd easy-to-use operating instructions, our technology overview, frequently asked
questions and warranty information. Talk about a dierent kind of air purier! Well, it’s a dierent kind of
technology from a dierent kind of company. Welcome to a whole new you.
The Airocide®Technology
Airocide draws in harmful airborne pathogens and forces them into a densely packed matrix of highly
reactive catalysts that are activated by a high intensity 254-nanometer light. The reaction destroys these
harmful pathogens on contact. Nothing is captured so there is nothing to clean. All that exits is crisp,
clear air.

6
How it Works
Helpful Hints Before Using the Airocide® Air Purifier
1. Identify where you will place the unit. We recommend placing Airocide in your bedroom on
a sturdy object: shelf, nightstand, dresser, desk or use our wall mount or oor stand accessory.
Airocide should be placed anywhere from one to eight feet o of the oor.
2. Place Airocide so it is exposed to air circulation. This means the top, front and two of the side
panels needs to be exposed for proper airow. Do not place Airocide in an enclosed space like a
bookshelf, butted up against a bookshelf or directly next to any piece of furniture.
3. Airocide should run 24 hours a day, seven days a week for optimal benets. Turning your unit o
when you are not home will not provide the maximum results.
Simple Set Up Instructions
1. Remove your Airocide unit from the box and protective packaging from around the unit.
2. (Optional) If you have a decorative sleeve for your Airocide, simply slide it on or o gently from
the back of the unit.
3. Unwrap the grill plate from the protective sleeve and gently place it on the front of the unit. The
grill simply attaches with magnetic latches. Note: When moving your Airocide, you may notice
a rattling sound within the unit, do not worry. This is nothing to be concerned about, it is simply
the inner pieces of the unit shifting. This is normal.
4. Place the unit on your identied location within your home. The unit can be placed horizontally or
vertically depending on your location and preference.

7
5. Plug it in. Your Airocide® uses 0.3 amp at 240 volts (approximately the same as a 60 watt light bulb).
Note: For the rst few days, you may notice a slight smell from your unit. This smell will naturally
dissipate within a few days use.
6. Locate the on/o button on the backside of the unit and press it until you notice the touch controls
illuminate to indicate power to the unit. Your Airocide is up and running on the high setting.
Continue reading to learn more about settings.
On/O
Power
Cord
Grill Plate
BACK
FRONT

8
Settings
To adjust mode, simply touch the appropriate icon on your Airocide®
High - When you turn your Airocide on, it will automatically default to the high setting. This
setting allows for optimal results.
Automatic – Programs the unit to run on high at most times and then transitions to low for a
slower, quieter speed. While most people nd the fan sound helps them sleep better at night,
the Automatic setting oers the option of a quieter setting at night. A light sensor is built within
the unit, so as the room darkens the unit adjusts to low and when enough light is present in the
room it adjusts to high.
Low – The low setting turns the unit to a slow speed. While this setting is not recommended
for optimal results, you may choose to change to a low setting for sleeping if you like a quiet
sleeping environment. In which case, you might consider the automatic setting, which will do that
for you automatically.
Low High Auto
FRONT

9
Operating Modes
Normal Operating Mode
When the power switch is in the “on” position, the front grill is installed and no error condition
is detected, one of the icon lights will indicate the “active” mode (low, high or automatic icons as
referenced on page 8). The “active” mode indicator light will be bright when the “active” mode is rst
selected, then will dim after 10 seconds and remain on until another mode button is pressed again.
Grill Removed Mode
If the front grill is removed while the power switch is in the “on” position, the unit will go into
“standby” mode and the “active” mode indicator light will ash brightly.
Error Mode
If the front grill is installed with the power switch in the “on” position and one or both of the
Reaction Chambers is missing, non-functional or not seated properly, the unit will enter “standby”
mode, causing all of the indicator lights to ash brightly. This condition can be automatically cleared
by correctly installing two functional Reaction Chambers.
Change Reaction Chamber Mode
When the Reaction Chambers need to be changed (once a year), the “active “ mode indicator light
will ash dimly. Your Airocide will not be eective in terms of removing pathogens in any manner at
this point and new Reaction Chambers need to be installed. See Maintenance and Cleaning section
for details.
No Lights
Indicator lights function only when the unit is plugged in and the power button is in the “on” position.

10
Maintenance and Cleaning
1. When the indicator light starts blinking (should be in about a year), you’ll need to change the two
Reaction Chambers inside your unit. To order new Reaction Chambers, go to www.airocide.com.
Your replacement kit will contain all of the information needed to simply change out the Reaction
Chambers and we will even supply you with a pre-paid shipping label to return the used Reaction
Chambers for recycling.
2. If you happen to spill something on the outside of your Airocide®, use a damp clean cloth to wipe
down.
3. There is nothing to clean within your unit, simply dust it as you would any other item in your home.
Available Accessories
1. Decorative Sleeve
2. Floor Stand
3. Wall Mount
4. Replacement Reaction Chamber Kit
For a complete description of the accessories and pricing
[email protected]

11
Frequently Asked Questions
Q: What size space can Airocide® cover?
A: Airocide is meant for single room use. It can accommodate a room of any size - small to large.
Q: Can I have my windows open?
A: Airocide will work with windows open or closed, but is most eective with the windows closed. If you
are an allergy or asthma suerer, however, experts recommend closed windows.
Q: My Airocide feels warm to touch on one side.
A: This is normal. The unit is drawing in power from that side.
Q: Do all sides need to be in the flow of air?
A: No, to be eective the top, front and two sides of the unit need to be in the ow of air.
Q: I heard a rattling sound when I took my Airocide out of the box. Is it broken?
A: No. This is the sound of the inner pieces simply shifting. This is normal and nothing is wrong with
your product.
Q: Is there any maintenance?
A: About once a year you will need to change the Reaction Chambers. See page 9 for details.
Q: What type of allergens can your air purifier remove from the air?
A: Our patented bioconversion process grabs fungi, mold, viruses, bacteria and more and disassembles
them at their molecular level. Airocide also clears the air of virtually 100% of Volatile Organic
Compounds (VOCs) – the harmful gasses emitted by products like aerosol sprays, cleaning supplies,
disinfectants, hobby supplies, drycleaned clothing, building materials, paints and paint thinner,
strippers, pesticides and even air fresheners.

12
NASA to Now
NASA had a problem. They needed a technology to help the astronauts on the International Space
Station take the ethylene gas emitted by plants out of the air. So, they created Airocide.
Fast-forward to 1998: Food packers, orists and grocery chains began to use Airocide to extend the shelf
life of owers, fruits and vegetables. (This one-of-a-kind technology helps save a portion of the 27 billion
pounds of produce lost to spoilage each year.)
In 2003 Airocide was introduced to hospitals, clinics, emergency rooms, dental oces and daycare
centers to help stem the spread of infectious disease. Further studies consistently demonstrate dramatic
reductions in mold and bacteria counts.
Today, Airocide comes home to you with air purication technology so scientically advanced it goes
far beyond that of traditional lters or electrostatic plates. This bio-conversion technology eliminates
virtually 100% of the harmful airborne pathogens in your home that can cause illness, including asthma
and allergies. And when you’re breathing cleaner air, you sleep better, feel better and have more energy.

13
One Year Limited Warranty
Please register your product at www.airocide.com/guarantee. You will need your serial number to
register. This number can be found on the side panel of the shipping carton, the bottom of the product
carton and on the back of your unit next to the power cord.
Akida Holdings LLC (hereinafter referred to as the “Company”) is pleased to oer the rst End User
Purchaser (“Consumer”) of an Airocide® Air Purication System a 12-month Limited Warranty, starting
from the date of purchase and subject to the following Terms and Conditions.
Terms & Conditions
1. The Limited Warranty covers defects in materials or workmanship in the unit for the time period
stated above. If there is a defect, and the defect is the result of faulty materials and/or workmanship,
the Company or its authorized Franchisee, Dealer, Distributor, or designated agent (collectively
referred to as “Authorized Representative”) will, at its discretion, either repair or replace the
defective components or the unit. If a defect cannot be repaired within a reasonable number
of attempts, the Consumer may elect to either have the unit replaced or obtain a refund of the
purchase price.
2. If the unit is found not to have a defect in material or workmanship, the Consumer, if it so desires,
may make arrangements to have the unit repaired by the Company. Charges for repairs of this
nature, if carried out, shall be paid by the Consumer.
3. In order to repair the Airocide unit and restore it to a fully operational condition, the Company may
alter the unit and utilize parts of a diering, but similar, design. Any part of the unit that is replaced
may be replaced with either new or refurbished parts. Any part that is replaced will become the
property of the Company.

14
4. While the Company will make every eort to expeditiously provide warranty service, the
Company shall not be required to do so within a specic period of time.
5. The repair or replacement of the unit or parts under this Warranty shall not extend the warranty
beyond the time period stated above.
6. The Company’s employees or dealers have no authority to vary the terms of this Warranty.
7. Continued use or possession of the goods after expiration of the warranty period shall be
conclusive evidence that the warranty was fullled to the full satisfaction of the Consumer.
Contact Us
If you believe there is a defect in materials or workmanship in the product during the warranty period,
you can contact Airocide® to request warranty service.
When contacting Airocide to request warranty service, you should be ready to describe
the problem with the unit and provide some type of proof of the original date of purchase, unless you
previously registered the product. Airocide can be contacted by mail or through the internet. Please
note * all products purchased at the electronic stores are under the store warranty in which you have
purchased it.
Telephone: [phone]
email: [e-mail]
www.airocide.ae/warranty
Fakhruddin General Trading
Dubai, UAE, P.O. Box 1299

15
If the unit is sent to the Company for warranty service, the cost of the transportation of the unit to
and from the Company service center, or that of an Authorized Representative shall be borne by the
Consumer, unless Company and the Consumer agree otherwise, in writing. The Company shall not
be responsible for any units lost or misplaced in transit, so the Consumer is encouraged to purchase
insurance for the unit during shipping.
If the unit is not accepted for warranty service or if the Company determines that the issue with the
unit is not the result of a defect in materials or workmanship, the Company shall provide a description
of the cause of the issue. If the Consumer disagrees with the Company’s determination, prior to
pursuing any other remedy, the Consumer must appeal that decision to the Company’s Warranty
Administrator by sending a letter to the address listed on page 14 explaining why warranty service
should be provided. The Warranty Administrator shall have 30 days to respond, and the Consumer shall
consider that response for 30 days prior to pursing any other remedy.
Exceptions & Exclusions
The warranty does not cover damage caused by the user, alterations, abuse, misuse, neglect, improper
installation, non-observance of operating instructions, accidents, improper use, unauthorized repair,
catastrophe/natural disaster, power surges, and normal wear and tear.
The Warranty will cease to be valid if any of the original serial numbers are removed or defaced or if the
unit is removed from the country in which it was originally purchased.

16
Disclaimer of Implied Warranties and Other Liabilities:
Please read the following disclaimers and limitations carefully.
There are no warranties that extend beyond the description on the face hereof.
The seller undertakes no responsibility for the quality of the goods except as otherwise provided
herein.
The seller assumes no responsibility that the goods
will be fit for any particular purpose for which you may
be buying these goods, except as otherwise provided herein.
* * *
This limited warranty is in lieu of all other express
or implied warranties of merchantability.
* * *
To the extent that the applicable law does not permit disclaimers
of certain implied warranties, any applicable implied warranty
shall be limited to the express warranty period stated herein.
Company’s liability is limited solely to repair or replacement.
In no event, shall the Company be liable for incidental and consequential
damages.
But, if Company is liable for any reason on any claim – whether based on a statute,
contract, warranty, or tort damage to property – Company’s total liability shall be limited
to the purchase price of the product, except where prohibited by law.

17
ETL
This product has been tested and complies with UL 507, CSA C22.2 No. 113, FCC 47CFR Part 15
(Subpart B, Class B), ICES-003 and the California Air Resources Board (CARB) requirements.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Notice for Customers in Canada:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
Airocide
APS-200

18
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
CARB
This air cleaner complies with the Federal Ozone Emissions limit and is ARB Certied by the
California Environmental Protection Agency’s Air Resource Board.
This air cleaner complies
with the federal ozone
emissions limit.
ARB CERTIFIED

19
1. Remove the grill (1) by placing your thumbs in the thumb pulls (2) on each side and pulling the grill toward you.
2. Make sure the Reaction Chamber is cooled before proceeding. Once it has cooled, use your thumbs to slide
the Reaction Chamber latches (3) away from the Reaction Chamber. (Follow arrow directions on the latches for
both chambers.)
NOTE: There are two Reaction Chambers in your Airocide Unit. Each Reaction Chamber has dierent geometry and will only t
in the appropriate slot. The Reaction Chambers are labeled “A” and “B” as illustrated below. REFER TO DRAWING BELOW TO
INSURE YOU HAVE THE PROPER ORIENTATION. Use the Airocide logo (4) and the control panel (5) as a reference. Follow
these steps:
3. The Reaction Chamber (6) will eject once both latches have cleared the chamber opening. Pull Reaction
Chamber away from the unit. Repeat for the other Reaction Chamber.
4. Remove Reaction Chamber “A” from the replacement kit. On the Airocide unit, Reaction Chamber “A” is located ABOVE
the Airocide logo. Once located, insert Reaction Chamber “A” into position as indicated by pushing until you hear the latches
click. Again, make sure proper alignment is followed, as illustrated in the diagram below. Once in place, remove the sticker
from the top of the Reaction Chamber.
5. Locate Reaction Chamber “B” on the Airocide unit. It is located BELOW the Airocide logo. Insert Reaction
Chamber “B” into position as indicated by pushing until you hear the latches click. Again, make sure proper
alignment is followed, as illustrated in the diagram below. Once in place, remove the sticker from the top of the
Reaction Chamber.
6. Place grill (1) back on the unit. Once the grill is back in place (magnetic latch), plug the unit in to an outlet, turn
the power to the unit on, and the unit will begin running in high mode.
CAUTION: The Reaction Chambers will be hot. Unplug the unit
and allow it to cool down for 5 minutes before installing new
Reaction Chambers.
Tip: The Reaction Chambers can be replaced in any unit
orientation, however it is easiest if you place the unit on its
back (cord side down).
Now get back to enjoying the benets of clear air.
Read carefully before installation of Replacement Chambers. Proper Reaction Chamber orientation is critical
prior to insertion. Failure to observe these instructions may result in damage to the Airocide® Unit.

www.airocide.ae
Safe Air. Safe Life