Airopie DC50 User manual

Document Camera
DC50
User Manual

NOTICES:PLEASE READ CAREFULLY BEFORE USE
● Use the document camera under the rated electric conditions.
● Do not place the document camera on any unstable surface.
It may fall and causeinjuries or damages.
● Do not place this device under direct sunlight or near heaters.
● Do not place this device near water.
● Keep the camera away from acid or alkali gas.
● Do not place this document camera in humid, dusty, windy or vibrant locations.
● The recommended operating environment is:
Temperature: 0°C--45°C(32F-113F)
Humidity:less than 75%
● Always unplug BEFORE cleaning the device. Use a damp soft-cloth for cleaning.
Donot use volatile solvent.
● When this equipment functions abnormally, such as smoke, smell, noise,
immediately unplug and call for professional assistance.
● Unplug the document camera when not in use.

1. Part Name And Functions
● Appearance
● Side Panel
● Control Panel
2. Remote Control
3. Pc Free Annotation And Control
● Annotation Functions
4. Specifications

Part Name And Functions:
Appearance:
Rear Panel:
①DC5V: power input
②VGA IN: VGA input
③Audio IN: audio input for VGA input
④VGA OUT: VGA output
⑤Audio OUT: audio output for VGA output
⑥HDMI IN: HDMI input
⑦HDMI OUT:HDMI output
⑧PC: USB connector,
used to connect with PC
⑨USB: N/A

ZOOM KNOB KENSINTON
USB
SD-CARD
● USB: USB connector, used to connect USB mouse.
● SD-CARD:SD card connector
● ZOOM KNOB: Zoom in/zoom out knob
● KENSINTON: Kensington lock
Side Panel
Control Panel

1. CAMERA: To switch back to camera image
2. HDMI IN: To switch to HDMI input
3. READ SD CARD：Long press to read SD card memory
4. SAVE: Capture and save the image to Memory stick, SD card, or built-in memory
5. RECORD: To start/stop recording a video
6. RECALL: Image recall mode enabled, display the saved images and video clips
7. POWER: Power on/off
8. LIGHT：Fill light on/off
9. DELETE: Delete the selected images or video clips
10. SPLIT: To get image split
11. FREEZE:To feeze the current on-screen image
12. ROTATE: To rotate the image with 90°180and 270
13. FOCUS-: Focus in
14. FOCUS+: Focus out
15. MENU: Set language/resolution/USB mode/image settings/format
16. BACK: Back to previous
17. OK: To confirm the selection
18. DIRECTION: up/ down/ left/ right
19. BRIGHTNESS+/-: To adjust the brightness of displaying image
20. AUTO:Adjust white balance and focus automatically
21. ZOOM+/-: Image zoom in and zoom out

Remote Control

1. POWER: Power on/off (Long press to turn off the power)
2. HOME: To switch back to camera image
3. USB: Switch to computer connection
4. DIRECTION: up/ down/ left/ right
5. BACK: Back to previous
6. AUTO:Adjust white balance and focus automatically
7. LIGHT：Fill light on/off
8. PC: HDMI IN: To switch to HDMI input
9. OK: To confirm the selection
10. MENU: Set language/resolution/USB mode/image settings/format
11. DELETE: Delete the selected images or video clips
12. ZOOM OUT
13. ZOOM IN
14. SAVE: Capture and save the image to Memory stick, SD card, or built-in memory
15. FREEZE: To freeze the current on-screen image
16. B/W: MONO/COLOR Mode
17. BRIGHTNESS+
18. BRIGHTNESS-
19. RECALL: Image recall mode enabled, display the saved images and video clips
20. RECORD: To start/stop recording a video
21. ROTATE: To rotate the image with 90°180and 270
22. SPLIT: To get image split
23. MIRROR: To toggle horizontal mirror , vertical mirror and horizontal+vertical mirror
24. TITLE: To freeze the title area
25. NEGA: NEGATIVE/POSITIVE Mode
26. FOCUS+
27. N/A
28. FOCUS-

PC Free Annotation And Control
After clicking the device button or the button "MENU" on the remote control,
the settings interface will appear on the screen, where you can set Language,
Resolution, USB Mode, Image Setting, Format, Default Setting, and About.
The USB mode defaults to camera, the annotation function needs to
select "Annotate", and the mouse is connected to the USB interface
on the side of the device.

Introduction To Annotation Interface Functions
Pen, select the pen to annotate
Rectangle, draw rectangles of different sizes
Red, color selection for annotations
Blue, color choice for annotations
Thin lines, use thin lines for pens and rectangles
Thick lines, use thick lines for pens and rectangles
Eraser, frame erase
Eraser, erase all
ZOOM OUT
ZOOM IN
AUTO FOCUS
FREEZE
SAVE
BRIGHTNESS+
BRIGHTNESS-

Specifications
Total pixel
Zoom
Image Sensor
Lens
Frame rate
Shooting area
Focus
Output signal
Resolution (Horizontal)
White balance
Color adjustment
Image capture
Video recording
Image effect
Anotation
OSD
Inputs
Outputs
USB2.0
Internal memory
External memory
USB driver and software
LED Lighting
Power
Weight
5.0 MP
12X optical, 20X digital
1/3" CMOS
ff=5.1~51mm FF=1.6~1.8
60fps(max)
A3
Auto/manual
XGA, SXGA，720P, 1080P
≥ 900 TV lines
Auto/manual
Red+/-, Blue+/-
Yes（to SD card)
One touch recording(to SD card)
Mirror, Rotation, Split, Freeze, Black and White
On board anotation
Yes
VGAx1, HDMIx1, Audiox1, Built-in Microphone
VGAx1, HDMIx1, Audiox1
Slave×2
No
SDHC card( up to 32G)
Windows XP/7/8/10, Mac OS, Chrome OS
Arm light×1
5V 2A
1.8kg