airquee Kick 'N' Stick Operating instructions

Page 1of 3
Kick ‘N’ Stick
IMPORTANT
AS OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY OUT
YOUR OWN RISK ASSESSMENT BEFORE ATTEMPTING TO USE THIS PRODUCT.
Site Survey:
1. Carry out a survey of the area where the ‘Kick ‘N’ Stick Dual Upright’will be located, and
check for any overhead/underground cables. It’s important that this is carried out to avoid
ground anchors penetrating underground services, and the ‘Kick ‘N’ Stick Dual Upright’
coming into contact with overhead cables when inflated.
2. You should provide an adequate power supply to the fan, this should adhere to your local
power regulations.
3. Check wind speed: It is not allowed to use an inflatable outdoors in a wind higher than
force 5 on the Beaufort scale of 28 - 38 kmph (19-24 mph). Force 5 is a fresh breeze
when small trees in leaf begin to sway.

Page 2of 3
2x
Included with your Kick ‘N’ Stick Dual Upright:
*the inclusions may differ depending on your model
You will need a suitable 230v/13Amp Power Supply to operate the fan.
CAUTION! Precautions should be taken during handling and use of
the product to prevent electric shock. The blower requires a Ground
Fault Protected Circuit (GFCI). Please read the manufacturer’s
Instruction Manual before using the blower(s).
Extra equipment you could consider for your new inflatable:
•Ground sheet to protect the underside of your inflatable
•Sandbag covers to anchor your inflatable indoors
•Sack truck to move your inflatable safely
•RCD to attach to your extension lead
•Crash Mats
This inflatable can be set up and packed away by 2 persons who have
had proper manual handling training and use the correct equipment to
move the inflatable.
Set Up:
-Unfold and flatten the inflatable.
- Install the desired target sheet on the uninflated game. The Target Sheet is attached
to the inflated structure with Velcro.
Some of models come with a black sheet. This is for the back of the unit (if only one side is
used). Normally it should be already installed on the unit.
If you wish to use the Penalty Shoot Out Target Sheet you may notice that both sides of the
unit have a missing Velcro part on the bottom, where the ball can fall out.
The inflatable
in its bag
Anchor Pegs
Operation
Manual
Repair Kit
Velcro
Footballs
Collecting
Stick
Handpump
Ropes
3x
Blank Sheet

Page 3of 3
IMPORTANT: PLEASE DO NOT OVER INFLATE THE
BALLS TO AVOID DAMAGE ON THE VELCRO COVER!
The collecting stick is made of 3, easily detachable parts:
1. Attach the Head to the Middle by pressing down the
two metal buttons.
2. Connect the Middle part with the End part by
twisting the black handle.
ENJOY AND HAVE FUN!
Legal Disclaimer:
The Airquee Operation Manual (the "Manual") is proprietary to Airquee Ltd and no ownership rights are hereby
transferred. No part of the Manual shall be used, reproduced, translated, converted, adapted, stored in a retrieval
system, communicated or transmitted by any means, for any commercial purpose, including without limitation, sale,
resale, licence, rental or lease, without the prior express written consent of Airquee Ltd.
Airquee Ltd does not make any representations, warranties or guarantees, express or implied, as to the accuracy
or completeness of the Manual. Users must be aware that updates and amendments will be made from time to time to
the Manual. It is the user's responsibility to determine whether there have been any such updates or amendments.
Neither Airquee Ltd nor any of its directors, officers, employees or agents shall be liable in contract, tort or in any other
manner whatsoever to any person for any loss, damage, injury, liability, cost or expense of any nature, including without
limitation incidental, special, direct or consequential damages arising out of or in connection with the use of the Manual.
All logos, images and content not owned by Airquee Ltd are copyright to their respective owners and have been
reproduced by permission.
Your product model, and its inclusions (number and type) may differ from the one presented in this manual. All the
pictures and drawings contained in this manual are for illustration purposes only. Any misuse or failure to adhere to the
instructions and recommendations contained in this manual will render void the warranty.
Version 1.2 09/08/2018
Head
Middle
Bottom