Airthings Wave Mini User manual

Airthings Wave Mini
Indoor air quality monitor
User Manual
Version 1
29 August 2020
Congratulations on taking this important step toward living a healthier life.
By keeping track of your indoor air quality levels, you can make healthier decisions in the
spaces where you spend most of your time.
The Airthings Wave Mini provides you with detailed information about airborne chemicals,
humidity, temperature, as well as mold risk indication. Wave Mini is a great way start
monitoring the quality of your air, for a healthier home. Get started by connecting to the
Airthings Wave App.
Breathe better, live better,
The Airthings Team
Get in touch
For technical support or if you have any questions or comments
that we did not answer here, you can reach us the following ways:
• The Support menu in the Airthings Wave mobile app
• Chat bubble on the airthings.com website
• Send an email to [email protected]

What’s in the box
Wave Mini, stand

Device Specifications
Wave Mini Specifications
1. Glow signal
2. Wave sensor
3. Battery compartments (3 AA batteries inserted)
4. Individual serial number
5. Device stand
Communication
Dimensions & Weight
Bluetooth low energy
80 x 80 x 26 mm
(3.1 x 3.1 x 1”)
Airthings Smartlink
868 / 915 Mhz
135g (4.8oz)

Wave Mini Setup
STEP 1 Airthings Wave App
Download or update the Airthings Wave App from the Apple App Store or Google Play Store
and create an account.
STEP 2Setup
Pull the battery tab on the device and follow the in-app instructions to connect the device to
your smartphone. There may be a firmware update when you start the device.
STEP 3Placement
Use the handy stand, or attach it to the wall using the mounting plate and a screw. The
placement of the Wave Mini depends on how you would like to use it. If you are using it as a
mold risk indicator, the Mini should be placed where mold is most likely to grow. (Go to
airthings.com/mold-risk-indicator for more info.) If you are using the device for overall air
quality, you should place the device near where you spend your time. Next to your bed, in
the kitchen, in a living room or gaming room are good options. Make sure it’s not too close to
any windows or ventilation.
STEP 4Calibration
Allow the sensors to calibrate for 7 days.

Daily Use
Wave function
Wave in front of your device for a quick visual indication of your radon or indoor air quality
levels. Green means good, yellow means fair, and red means poor.
Airthings Wave App
Your app will update automatically when your smartphone is in range of your Wave Mini. Or
you can manually update when you open the app and are in Bluetooth range. The Airthings
Wave App includes sensor values, historical graphs, and long and short term averages.
Integrations
Wave Mini integrates with IFTTT and Google Assistant so you can receive air quality
measurements, give voice commands and set alerts. However, with the addition of the
Airthings Hub you can connect to a smart plug or smart product to control your thermostat,
air purifier, or humidifier. The Hub brings your Airthings products online, wirelessly.
How to use your Wave Mini as a mold risk indicator
For the most accurate readings, the device should be placed where mold is most likely to
grow. The most vulnerable areas are often the coldest spot of the wall. Here are some
suggestions:
ènext to a wall or on a windowsill
èunderneath or behind furniture
ètowards the floor on external walls
ènext to underground external walls
èbehind an access door (such as inspection hatch under a bathtub etc.)
Go to airthings.com/mold-risk-indicator for more information.

Troubleshooting
Problem
Resolution
Something seems off
Always make sure that you have updated to
the latest device software. In the device
menu, click update device.
Not able to connect to my device
Make sure you have the detector within the
range of 2-5 meters or 5-15 feet.
Make sure Bluetooth is enabled on your
smartphone.
My app is not updated when running in
background mode
Open your phone settings and verify that
the Airthings Wave App is running in the
background. You can usually find this in the
app manager section of your phone
settings.
Make sure you are in Bluetooth range
periodically.
No response from glow signal
First sync your data and then replace the
batteries. We recommend AA alkaline (LR6).

Common Questions
How does the Mold Risk indicator work?
The mold risk sensor uses an algorithm based on the temperature and humidity sensors to
measure how fast mold can grow under the current conditions. We have used the criteria for
moisture control in buildings based on ASHRAE standards (a global society advancing
human well-being through sustainable technology for all buildings).
What is the 7-day calibration period?
When first pairing your Wave Mini you will see an alert showing the sensors are calibrating.
While the temp and humidity sensors work within minutes, the VOC sensor will calibrate itself
over these days to adjust to new environment.

Regulatory Information
Regulatory information Canada
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not
cause interference; and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
RF exposure safety
This product is a radio transmitter and receiver. It is designed not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the ISED. The antenna must be
installed and operated with a minimum distance of 20 cm between the radiator and your
body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
CAN ICES-3 (B)/NMB-3(B)
This Class B digital apparatus complies with Canadian ICES-003
Regulatory information USA
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Class B device notice
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF exposure safety
This product is a radio transmitter and receiver. It is designed not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission. The antenna must be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Safety and maintenance
This product is intended for indoor use only. Avoid direct exposure to sunlight for long
periods. Avoid exposure to direct heat sources. For correct usage, make sure the detector is
operating in the specified temperature range (see technical specifications for individual
products). Exposure to high humidity might permanently alter the detector sensitivity or
damage it. Do not disassemble. If the detector does not work as specified or you are in
doubt, contact your local dealer or visit us at Airthings.com. Use a dry cloth to clean the
detector. When replacing the batteries, pay attention to the polarity marks. Always snap the
mounting bracket to the detector’s rear side to protect the batteries, even when the detector
is not permanently mounted. Disposal: electronic equipment.
Frequency Bands
Frequency bands and the maximum radio-frequency power transmitted in the frequency
bands in which the Airthings instruments operate:

The Hub (Model 2810) and Hub Cellular (Model 2820) contain a power supply tested
according to the following standards: UL60950, EN60950, BS60950, AS/NZS60950 and
tested to comply with FCC standards for home or office use CAN ICES-3 (B)/NMB-3(B). The
power supply is certified by TUVRheinland US (TUV020687EA)
EU declaration of conformity
Hereby, Airthings AS, Wergelandsveien 7, 0167 Oslo, declares that this product is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: airthings.com/regulatory-information.
Limited liability
The instruments are tested and quality-assured by production. They meet the accuracy values
set out in the specifications. It is recommended to keep the instruments constantly activated
and the batteries in place until drained.
Airthings AS shall not be liable for damages related to failure or loss of data arising from
incorrect operations and handling of the instruments.
Terms & conditions can be found on airthings.com/terms-use-privacy/
For additional questions go to support.airthings.com
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG,
Inc. and any use of such marks by Airthings is under license.
Copyright Airthings AS, 2020
Hub (Model:2810) / Hub Cellular
(Model: 2820)
FCC ID: 2APPT-2820
IC: 23900-2820
Wave 2 (Model: 2950) / Wave Plus
(Model: 2930)
FCC ID: 2APPT-2930
IC: 23900-2930
Wave Mini (Model: 2920)
FCC ID: 2APPT-2920
IC: 23900-2920
Frequency Range (MHz):2402.0 - 2480.0 (Bluetooth)
Output power: <5 mW
Frequency Range (MHz) in Europe: 868 - 870 MHz (SmartLink)
Output power: <25 mW
Frequency Range (MHz) in North America: 902 - 928 MHz (SmartLink)
Output power: <25 mW
Hub 2820 GSM Frequency Range: GSM 900 MHz, GSM 1800 MHz, GSM 850 MHz, GSM 1900 MHz
LTE Cat M1 Frequency Range: LTE B1 2100 MHz, LTE B2 1900 MHz, LTE B3 1800 MHz, LTE B4 1700
MHz, LTE B5 850 MHz, LTE B8 900 MHz, LTE B12 700 MHz, LTE B13 700 MHz, LTE B18 850 MHz, LTE
B19 850 MHz, LTE B20 800 MHz, LTE B26 850 MHz, LTE B28 700 MHz, LTE B39 1900 MHz