AIS IP10IA99 series User manual

OPEN HMI USER MANUAL
USER MANUAL

Human Machine Interface Panel
10.4" / 15" / 17”
IP10IA99 / IP15IA99 / IP17IA99 Panel PC series

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 2
Table of Contents
1. Introduction -----------------------------------------------------------------------------------------5
1.1. Symbols used in this Manual -----------------------------------------------------------------------------------------7
2. Important Instructions----------------------------------------------------------------------------------------------8
2.1. Note on the Warranty ----------------------------------------------------------------------------------------------------------8
2.2. Exclusion of Accident Liability Obligation-----------------------------------------------------------------------------------8
2.3. Liability Limitation / Exemption from the Warranty Obligation ------------------------------------------------------8
3. Safety Instructions--------------------------------------------------------------------------------------------------------------9
3.1. Electrostatic Discharge (ESD) -------------------------------------------------------------------------------------------------10
3.2. Grounding Methods --------------------------------------------------------------------------------------------------------------10
3.3. Instructions for the Lithium Battery -----------------------------------------------------------------------------------------10
3.4. FCC Statement---------------------------------------------------------------------------------------------------------------------10
3.5. Electromagnetic Compatibility-------------------------------------------------------------------------------------------------11
4. Goods of Delivery ---------------------------------------------------------------------------------------------------------------12
4.1. Label and Product Identification----------------------------------------------------------------------------------------------13
5. Product Description -----------------------------------------------------------------------------------------15
5.1. Front Side ---------------------------------------------------------------------------------------------------------------------------17
5.1.1.10.4"/15"/17” Display with Touch Screen --------------------------------------------------------------------------------18
5.1.2. Front Panel Care and Cleaning (Chemical Resistance) -------------------------------------------------------------18
5.2. Bottom View ----------------------------------------------------------------------------------------------------------------------19
5.3. Power, Control Indicators, Reset and Grounding-------------------------------------------------------------------------20
5.3.1. Power Connector ….-----------------------------------------------------------------------------------------------------------20
5.3.1.1. Power Button and Power LED--------------------------------------------------------------------------------------------20
5.3.1.2. Reset Button ------------------------------------------------------------------------------------------------------------------22
5.3.1.2. HDD LED -----------------------------------------------------------------------------------------------------------------------22
5.3.2. Interfaces (Rear, Bottom Side of the System) ------------------------------------------------------------------------22
5.3.2.1. USB Connectors --------------------------------------------------------------------------------------------------------------23
5.3.2.2. COM Serial Interface Connector -----------------------------------------------------------------------------------------23
5.3.2.3. LAN1 and LAN2 Ethernet Interface Connectors---------------------------------------------------------------------23
5.3.2.4. VGA Interface Connector --------------------------------------------------------------------------------------------------23
5.4. Top View-----------------------------------------------------------------------------------------------------------------------------23
5.5. Left and Right Side View--------------------------------------------------------------------------------------------------------24
5.6. Rear View ---------------------------------------------------------------------------------------------------------------------------25
5.7. DC or AC Power Connection.---------------------------------------------------------------------------------------------------25
5.7.1. DC Power Cable. ---------------------------------------------------------------------------------------------------------------26
5.7.2. External AC/DC Adapter (Optional) --------------------------------------------------------------------------------------26
5.8. Accessing Internal Components ---------------------------------------------------------------------------------------------27
6. System Installation -------------------------------------------------------------------------------------------------------------27
6.1. H/W Installation -------------------------------------------------------------------------------------------------------------------27
6.1.1. Jumpers ---------------------------------------------------------------------------------------------------------------------------27
6.1.2. Connector-------------------------------------------------------------------------------------------------------------------------30
6.1.3. Memory module Installation ---------------------------------------------------------------------------------------34

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 3
6.1.4. Serial ATA Hard Disk Installation.------------------------------------------------------------------------------------------35
6.1.5. CF Card Installation ----------------------------------------------------------------------------------------------------------36
6.1.6. DC Power Input Installation -----------------------------------------------------------------------------------------------37
6.2. Panel and External AC/DC Adapter Mounting-----------------------------------------------------------------------------37
6.2.1. Panel Mounting------------------------------------------------------------------------------------------------------------------37
6.2.2. VESA Mounting. ---------------------------------------------------------------------------------------------------------------41
6.2.3. Wall Mounting of the External AC/DC Adapter-------------------------------------------------------------------------41
6.3. Getting started---------------------------------------------------------------------------------------------------------------------42
6.3.1. Connecting to DC Power Source -------------------------------------------------------------------------------------------42
6.3.2. Connecting to AC Power Source via the AC/DC Adapter------------------------------------------------------------44
6.4. BIOS Setup ------------------------------------------------------------------------------------------------------------------------45
6.4.1. Entering Setup -- Launch System Setup---------------------------------------------------------------------------------45
6.4.2. Main--------------------------------------------------------------------------------------------------------------------------------45
6.4.3. Information ---------------------------------------------------------------------------------------------------------------------46
6.4.4. Configuration ---------------------------------------------------------------------------------------------------------47
6.4.5. Boot --------------------------------------------------------------------------------------------------------------------59
6.4.6. Security----------------------------------------------------------------------------------------------------------------60
6.4.7. Save and Exit---------------------------------------------------------------------------------------------------------61
6.5. Software Installation---------------------------------------------------------------------------------------------------62
6.5.1. Calibration the Touch Screen --------------------------------------------------------------------------------------62
6.5.1.1. Calibrating the Touch Screen ----------------------------------------------------------------------------------62
6.5.1.2. Calibrate the Touch Screen --------------------------------------------------------------------------------------62
6.5.2. Brightness Control ---------------------------------------------------------------------------------------------------65
7. Technical Data --------------------------------------------------------------------------------------------------------67
7.1. Product Specifications -------------------------------------------------------------------------------------------------67
7.2. Mechanical Specifications ---------------------------------------------------------------------------------------------67
7.3. Certifications and Standards------------------------------------------------------------------------------------------74
8. RMA (Return Material Authorization) Service -----------------------------------------------------75

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 4
List of Figures
Fig.4-1: Label on the unit-------------------------------------------------------------------------------------------------------------13
Fig.5-1: Top view of the IP15IA99 Panel PC System (15”) ----------------------------------------------------------------15
Fig.5-2: Right view of the IP15IA99 Panel PC System (15”) --------------------------------------------------------------15
Fig.5-3: Front view of the IP15IA99 Panel PC System (15”) --------------------------------------------------------------15
Fig.5-4: Left view of the IP15IA99 Panel PC System (15”) -----------------------------------------------------------------15
Fig.5-5: Bottom view of the IP15IA99 Panel PC System (15”) ------------------------------------------------------------15
Fig.5-6: Rear view of the IP15IA99 Panel PC System (15”) ---------------------------------------------------------------15
Fig.5-7: Top view of the IP10IA99 Panel PC System (10”) ----------------------------------------------------------------16
Fig.5-8: Right view the IP10IA99 Panel PC System (10”) -------------------------------------------------------------------16
Fig 5-9: Front view of the IP10IA99 Panel PC System (10”) --------------------------------------------------------------16
Fig.5-10: Left view the IP10IA99 Panel PC System (10”) -------------------------------------------------------------------16
Fig.5-11: Bottom view of the IP10IA99 Panel PC System (10”) ----------------------------------------------------------16
Fig.5-12: Rear view of the IP10IA99 Panel PC System (10”) -------------------------------------------------------------16
Fig.5-13: Front view of the IP15IA99 Panel PC System (15”) -------------------------------------------------------------17
Fig.5-14: Chemical resistance for the area of textured paint---------------------------------------------------------------18
Fig.5-15: I/O View ----------------------------------------------------------------------------------------------------------------------19
Fig.5-16: DC Power connector on the bottom (rear) side of the OIC Panel system ---------------------------------20
Fig.5-17-1: Close-up on front panel of 10"/15”/17”, Power button and LED as power indicator----------------21
Fig.5-17-2: Close-up on I/O of 10"/15”/17”, Power LED and Reset button--------------------------------------------21
Fig.5-18: Adjust the switch ---------------------------------------------------------------------------------------------------------21
Fig.5-19: I/O interface-----------------------------------------------------------------------------------------------------------------22
Fig.5-20: Expansion I/O on 15’/ 17” ---------------------------------------------------------------------------------------------22
Fig.5-21: Expansion I/O on 10.4” -------------------------------------------------------------------------------------------------22
Fig.5-22: Rear side of the system (shown as 10.4” IP10IA99 ) ----------------------------------------------------------23
Fig.5-23: Right side of the 10.4” IP10IA99------------------------------------------------------------------------------24
Fig.5-24: Left side of the 10.4” IP10IA99----------------------------------------------------------------------------------------24
Fig.5-25: Rear side of the system (shown as 10.4” IP10IA99) -----------------------------------------------------------25
Fig.5-26: External Open Lead Cable supplied with the IPxxIA99 Panel system---------------------------------------26
Fig.5-27: External AC/DC 24V/75W adapter supplied with the IPxxIA99 Panel system----------------------------26
Fig.6-1: Top-side Jumper and Connector Locations---------------------------------------------------------------------------28
Fig.6-2: Installation of Memory -----------------------------------------------------------------------------------------------------34
Fig.6-3: The procedure of HDD installation--------------------------------------------------------------------------------------35
Fig.6-4: Side View of CF Card Insertion ------------------------------------------------------------------------------------------36
Fig.6-5: Power adaptor installation ------------------------------------------------------------------------------------------------37
Fig.6-6: Cut-out definition------------------------------------------------------------------------------------------------------------37
Fig.6-7: Panel cut-out dimension for IP10IA99---------------------------------------------------------------------------------38
Fig.6-8: Panel cut-out dimension for IP15IA99---------------------------------------------------------------------------------38
Fig.6-9: Panel cut-out dimension for IP17IA99---------------------------------------------------------------------------------39
Fig.6-10: Mounting kit step by step------------------------------------------------------------------------------------------------40
Fig.6-11: Inside of the wall mount plate for the AC/DC adapter----------------------------------------------------------41
Fig.6-12: Housing for the AC/DC adapter (only for wall mounting) -----------------------------------------------------41
Fig.6-13: Rear side of the mounting plate without DIN Rail clip ----------------------------------------------------------41

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 5
Fig.6-14: Mounting plate with DIN Rail clip -------------------------------------------------------------------------------------41
Fig.6-15: Connecting to DC power source with open lead cable ----------------------------------------------------------42
Fig.6-16: Connecting to AC power source via the AC/DC adapter --------------------------------------------------------44
Fig.6-17: Setup Program Initial Screen -------------------------------------------------------------------------------------------45
Fig.6-18: System Information -------------------------------------------------------------------------------------------------------46
Fig.6-19: Setup Program Initial Screen -------------------------------------------------------------------------------------------47
Fig.6-20: ACPI Configuration --------------------------------------------------------------------------------------------------------48
Fig.6-21: CPU Configuration ---------------------------------------------------------------------------------------------------------48
Fig.6-22: USB Configuration ---------------------------------------------------------------------------------------------------------50
Fig.6-23: SATA Configuration--------------------------------------------------------------------------------------------------------50
Fig.6-24: Integrated Video Configuration----------------------------------------------------------------------------------------52
Fig.6-25: GMCH BLC Control---------------------------------------------------------------------------------------------------------52
Fig.6-26: LAN Configuration ---------------------------------------------------------------------------------------------------------53
Fig.6-27: W83627UHG Serial Port 1 Configuration----------------------------------------------------------------------------54
Fig.6-28: W83627UHG Super IO Configuration --------------------------------------------------------------------------------54
Fig.6-29: H/W Monitor Configuration ---------------------------------------------------------------------------------------------55
Fig.6-30: Serial Port Console Redirection Configuration ---------------------------------------------------------------------56
Fig.6-31: 15 PCI Configuration------------------------------------------------------------------------------------------------------57
Fig.6-32: Power Control Configuration--------------------------------------------------------------------------------------------58
Fig.6-33: Advanced Configuration--------------------------------------------------------------------------------------------------59
Fig.6-34: Boot----------------------------------------------------------------------------------------------------------------------------60
Fig.6-35: Security -----------------------------------------------------------------------------------------------------------------------61
Fig.6-36: Save and Exit----------------------------------------------------------------------------------------------------------------62
Fig.6-37: Touch calibration procedure---------------------------------------------------------------------------------------------63
Fig.6-38: Brightness Control procedure ------------------------------------------------------------------------------------------ 65
Fig.7-1: Front view of 10.4“Panel PC system -----------------------------------------------------------------------------------70
Fig.7-2: Front view of 15“Panel PC system--------------------------------------------------------------------------------------70
Fig.7-3: Front view of 17“Panel PC system--------------------------------------------------------------------------------------71
Fig.7-4: Rear & Right-side view of 10.4” Panel PC System -----------------------------------------------------------------72
Fig.7-5: Rear & Right-side view of 15” Panel PC System--------------------------------------------------------------------72
Fig.7-6: Rear & Right-side view of 17” Panel PC System--------------------------------------------------------------------73
Fig.7-7: Wall mount kit Top & Side View-----------------------------------------------------------------------------------------73
List of Tables
Table 5-1: Electrical Specifications for the Panel System -------------------------------------------------------------------20
Table 5-2: Control indicators of the system -------------------------------------------------------------------------------------21
Table 5-3: System status--------------------------------------------------------------------------------------------------------------21
Table 5-4: HDD Working status -----------------------------------------------------------------------------------------------------22
Table 6-1: Cut-out Dimension by Panel size-------------------------------------------------------------------------------------40
www.kontron.com
3

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 6
1 . Introduction
This user manual is designed for American Industrial Systems, Inc. Panel PC series IP10IA99 / IP15IA99 / IP17IA99.
Included is a comprehensive overview of the Panel CP systems designed by American Industrial Systems.
All rights reserved. None of this document shall be duplicated, stored in a retrieval system, or transmitted by all
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
American Industrial Systems, Inc. No copyright or patent liability is assumed with respect to the use of the
information included herein. Although every precaution has been taken in the preparation of this documentation,
neither responsibility is assumed for errors or omissions by the publisher and the author, nor is any liability assumed
for damages caused by the use of the information included herein.
The information in this documentation is subject to change without prior notice and does not stand for a commitment
on the part of American Industrial Systems, Inc.
The information included in this manual may be subject to technical changes especially owing to constant product
upgrades.
The attached documentation does not involve any guarantee on the part of American Industrial Systems, Inc.
regarding technical processes described in the manual or any product characteristics specified in the manual.
American Industrial Systems, Inc. does not accept any liability for any printing errors or other inaccuracies in the
manual unless it can be proven that American Industrial Systems, Inc. is aware of such errors or inaccuracies or
that American Industrial Systems, Inc. overlooks these as a result of gross negligence and American Industrial
Systems, Inc. has failed to get rid of these errors or inaccuracies for this reason.
American Industrial Systems, Inc. clearly inform the users that this manual only encloses a general description of
technical processes and instructions which may not be applicable in every single case. In cases of doubt, please
contact American Industrial Systems.
This manual is protected by copyright. All rights are reserved by American Industrial Systems, Inc. Copies of all or
part of this manual or translations into different languages may only be made with the prior written consent
American Industrial Systems, Inc. point out that the information included in this manual is constantly being updated
in line with the technical changes and improvements made by American Industrial Systems, Inc. to the products
and thus this manual only reflects the technical status of the products at the time of printing.
© 2012 by American Industrial Systems, Inc.

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 7
1.1 Symbols used in this manual
Symbol
Denotation
This symbol designates the danger of injury to the user or the risk of damage to the
product if the corresponding warning notices are not observed.
This symbol designates that the product or parts which could be damaged if the
corresponding warning notices are not observed.
This symbol designates general information about the product and the user’s guide.
This symbol designates detail information about the specific product configuration.

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 8
2. Important Instructions
This chapter includes instructions which must be carefully followed when the Operator Interface Computer system,
IP10IA99 / IP15IA99 / IP17IA99, is used. The manufacturer’s instructions provide helpful information on your
system.
2.1 Notes on the Warranty
Due to their limited service life, parts which, by their nature, are especially subject to wear down (wearing parts)
are not included in the guarantee beyond the legal stipulations.
2.2 Exclusion of Accident Liability Obligation
American Industrial Systems, Inc. shall be exempted from the statutory accident liability obligation if users fail to
abide by the safety instructions.
2.3 Liability Limitation / Exemption from the Warranty Obligation
In the event of damage to the PPC unit caused by failure to abide by the hints in this manual and on the unit
(especially the safety instructions), American Industrial Systems, Inc. shall not be required to respect the warranty
even during the warranty period and shall be free from the statutory accident liability obligation.

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 9
3. Safety Instructions
This section should be carefully read and please abide by the instructions for your own safety and right use
of the unit.
The chapter also includes information on approval and interference inhibition of your unit. Please abide by the
warnings and instructions on the unit and in the manual.
The Operator Interface Computer system, IP10IA99 / IP15IA99 / IP17IA99, Panel system was built and tested by
American Industrial Systems, Inc. in accordance to and kept the company in a perfectly safe condition.
In order to retain this condition and make sure safe operation, the users must abide by the instructions and warnings
◎The unit must be used in accordance with the instructions of usage.
◎The electrical installations in the room must not violate the requirements of the local (country-specific) regulations.
◎Pay cautious attention that there are no cables, especially power cables, in areas where persons can go over them.
◎Only use the power cord supplied with the package. Don’t use injured or damaged power cords.
Hints for DC power connection: The DC power source should be able to be switched off and on via an isolating
switch. The unit is only completely disconnected from the DC main power source, when the DC power cord is
disconnected either from the power source or the unit. Therefore, the DC power cord and its connectors must always
remain within reach.
Hints for AC power connection via external AC/DC adapter: The main power cable of the optional external
AC/DC adapter serves as disconnecting device. For this reason the outlet of the AC power source must be located
near to the device and be easily reached.
◎Never place the unit under direct sunlight, near heat sources or in a humid place. Make sure the unit has proper
ventilation.
◎Only units and components which meet the requirements of an SELV circuit (safety extra low voltage) in
compliance with EN60950 can be connected to the interfaces of the system.
◎All plugs on the connection cables must be screwed or locked to the housing.
◎The Operator Interface Computer panel system, IP10IA99 / IP15IA99 / IP17IA99, designed to be used in upright
position with the I/O interfaces downwards.
◎The unit generates heat under operation condition. Make sure it is properly ventilated. Never cover up the air
intake and exhaust openings of the unit. Do not impede the fins of the heat sink.
◎Repairs may only be operated by specialists or technicians qualified and authorized by American Industrial
Systems, Inc.
◎Maintenance or repair on the open unit may only be operated by specialists or technicians qualified and authorized
by American Industrial Systems, Inc. who are familiar with the related hazards.
◎When accessing to internal components, users must switch off the unit and disconnect it from the power source.
◎Only original accessories (or suggested optional parts) approved and supplied by American Industrial Systems, Inc.
◎The DC-input must meet SELV requirements of EN60950-1 standard.
◎Assumption of safe operation no longer possible must be taken,
- if the unit has obvious damage or
- if the unit no more functions.
Under such cases that the unit must be shut down and secured against any unintended operation.

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 10
3.1 Electrostatic Discharge (ESD)
A sudden discharge of electrostatic electricity can damage electrostatic-sensitive devices or circuit.
Adequate packaging and grounding techniques are essential fundamentals to avoid damage. Following
precautions should be always taken:
1. Deliver printed circuit boards in electrostatic-safe containers such as cartons, boxes or anti-static bags.
2. Keep electrostatic-sensitive parts in their containers until they reach an electrostatic-free station.
3. Follow adequate grounding when a sensitive PCB, components, or assemblies are touched.
4. Store electrostatic-sensitive PCB’s in a protective packaging or on conductive foam.
3.2 Grounding Methods
Protect against electrostatic damage of the unit by taking the following preventative measures:
1. Cover workstations with approved anti-electrostatic material. Provide a wrist strap connected to a working bench
and properly grounded tools and equipment.
2. For extra protection by using anti-electrostatic mats, heel straps, or air ionizers.
3. Handle electrostatic-sensitive components, PCB’s, and assemblies with care nearby the case or the edge of the
board.
4. Prevent contact with pins, leads, or circuitry.
5. Switch off power and input signals before plugging and removing connectors or test equipment.
6. Keep the work area free from non-conductive materials such as ordinary plastic assembly aids and Styrofoam.
7. Use field service tools with conductivity, such as screwdrivers, pliers, and vacuum cleaners.
8. Always put drives and PCBs with the component-side down on the working bench.
3.3 Instructions for the Lithium Battery
Warning
Danger of explosion when wrong type of battery is replaced. Replacement only with the same type or
equivalent type recommended by the manufacturer.
Do not throw away used CMOS batteries to domestic waste. Throw away the battery according to the local
regulations dealing with the disposal of these special materials (e. g. to the collecting points for disposal of
batteries).
3.4 FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection from harmful interference when the
equipment is operated in commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in residential area is likely to cause harmful
interference in which case the users will be required to correct the interference at his own expense.

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 11
3.5 Electromagnetic Compatibility
The Operator Interface Computer panel system, IP10IA99/IP15IA99/IP17IA99, has been designed for industrial use.
The most recent version of the EMC guidelines (EMC Directive 2004/108/EC) is applied. If the users modify and/or
add to the equipment (e.g. installation of add-on cards), the prerequisites for the CE conformity declaration (safety
requirements) may be not applicable any more.

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 12
4. Goods of Delivery
Panel 10.4” IP10IA99-A1
Panel 15” IP15IA99-A1
Panel 17” IP17IA99-A1
IP10IA99 / IP15IA99 / IP17IA99 Panel PC series
Panel Mount Kit
Panel 10.4” IP10IA99-A1 8 pieces
Panel 15” IP15IA99-A1 16 pieces
Panel 17” IP17IA99-A1 16 pieces
Open Lead DC Power Cable
Power Cord ( US & EU )
AC/DC Adapter (24V/75W) with
Power Cord (compliant with
EU/US requirement)
Optional Wall-mount bracket or
Support bracket (for DIN Rail
Clip) of the AC/DC Adapter

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 13
Optional AC/DC Adapter
Housing for Wall-mount or DIN
Rail Mount.
1x DIN Rail Clip (Optional) for
standard 35mm DIN Rail
4.1. Label and Product Identification
The label is placed at the rear side of the unit, IP10IA99 / IP15IA99 / IP17IA99 Panel PC series. These model & part
numbers correspond to the model & part numbers for certification tested by UL, and other certifying agencies. On the
label of the system, the “bracket” is replaced by alphanumeric characters combination according to the
configuration of ordered systems.
Fig.4-1: Label on the unit

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 14
5. Product Description
The Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 / IP15IA99 / IP17IA99, is a
Human-Machine-Interface (HMI) system with integrated a 5-wire Resistive Touch Screen designed for harsh
industrial applications.
The ruggedness design with a brilliant mechanical firmness indicates the top qualities of a Panel PC suitable for the
operation in strict industrial environment.
Before you begin using your Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 / IP15IA99 /
IP17IA99, you should take a few minutes to learn about the various ports, bays, connectors and indicators that are
part of your Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 / IP15IA99 / IP17IA99, as well as
the components that compose your system.
The Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 / IP15IA99 / IP17IA99, has many special
features：
(1) Lower Power ATOM 1.66GHz N455 Processor and Fan-free System.
(2) In front of the touch panel, a complete overlay (DIN42115-2) with anti-reflection is attached.
(3) The complete overlay in front of touch panel and bezel (stainless steel or aluminum) protects the display from
dust, water and accidental contact.
(4) 5-pin terminal block connector for power inlet from the adaptor to the unit. 3-pin is the power (V+ / NC / V-)
supplied from a wide input range DC +12V ~ +24V (± 20% tolerance); while the other 2-pin serves the UPS-like
purpose. If the AC power source is failed and no power inputs to the DC adaptor, the other 2-pin on the right side
of the connector can supply the power to the unit from the standby UPS.
(5) The I/O is a flexible design, main combination with 2x RS-232/422/485 ports (COM1, 2), 1x VGA port, 2x USB
1.1/2.0 ports, 2x Gigabit Ethernet ports. In addition, users may select expandable I/O combination of RS-232 port
(COM3), 2x USB 1.1/2.0 ports for different application demands.
(6) Indicators of 1x Power LED (front side), 1x HDD LED and 2nd Power LED (rear side) are designed.
(7) “Power On after AC Power Loss” - when the power is supplied again, it will start Auto Power On (default setting in
BIOS).
(8) HDD and CF card are easily accessible for installation and maintenance.
(9) Brightness of Panel PC is adjustable by users through application software (API) of the OS system.
(10) The selectable RS-232/422/485 function can be set through BIOS.
When powering on the Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 /
IP15IA99 / IP17IA99, please make sure that the air intake and exhaust openings are not blocked.
Features of ease-of-use, slim-type, fan-free, noise-less and low power consumption should be emphasized as well.

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 15
Outlook of the Operator Interface Computer 10"/15"/17” NEMA4 system, IP10IA99 / IP15IA99 / IP17IA99.
Fig.5-1:Top view of the IP15IA99 Panel PC System (15”)
Fig.5-2:
Right view
Fig.5-3：Front view of the IP15IA99 Panel PC System (15”)
Fig.5-4:
Left view
Fig.5-5: Bottom view of the IP15IA99 Panel PC System (15”)
Fig.5-6: Rear view of the IP15IA99 Panel PC System (15”)

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 16
‘
Fig.5-7: Top view of the IP10IA99 Panel PC System (10”)
Fig.5-8:
Right view
Fig.5-9：Front view of the IP10IA99 Panel PC System (10”)
Fig.5-10:
Left view
Fig.5-11: Bottom view of the IP10IA99 Panel PC System (10”)
Fig.5-12: Rear view of the IP10IA99 Panel PC System (10”)

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 17
5.1 Front Side View
Fig.5-13：Front view of the IP15IA99 Panel PC System (15”)
1
Complete overlay on the front bezel of
Stainless Steel or Aluminum
4
Power Button
2
Logo (optional)
5
LED as Power indicator
3
10.4"/15"/17” TFT-LCD display with 5-Wire
Touch Screen
All versions are suitable for installation in an instrument panel or other cabinet. On the front side are located:
◎Front Bezel (Stainless Steel or Aluminum front bezel with customized complete overlay of PET) for the
10.4"/15"/17” display.
◎Display (10.4"/15"/17”) with corresponding 5-Wire Resistive Touch Screen.
◎Power Button and LED as Power Indicator
Depending on the size of the integrated display (10.4"/15"/17”), the outline dimensions of display unit are:
Dimension [mm]
10.4" Display
IP10IA99
15" Display
IP15IA99
17" Display
IP17IA99
Front Bezel of Stainless Steel (W x H)
314 x 253
425.4 x 330
437 x 375
Front Bezel of Aluminum (W x H)
314 x 253
425.4 x 330
437 x 375
Front cut-out for display (W x H)
213.58 x 160.75
305.5 x 229.5
338.2 x 269.7
Rear side enclosure (W x H x D)
294 x 234 x 50
406.4 x 311 x 53.4
418 x 356 x 58.4

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 18
5.1.1 10.4"/15"/17" Display with Touch Screen
Depending on the ordered Operator Interface Computer 10"/15"/17” NEMA4 panel system, IP10IA99 / IP15IA99 /
IP17IA99, the built-in display is a 10.4" or 15" or 17” display. For technical specification of the built-in display, please
refer to the section of “Technical Data” in this manual.
The display is designed with a 5-Wire Resistive Touch Screen. The surface of the display is also mechanically
protected through the touch screen. The touch screen (USB interface) registers contacts of a finger or a pen and
allows moving the mouse pointer. Use a stylus for best results. It functions only under integration of the necessary
software. Users get the corresponding touch screen driver for their operating system, installed on the Operator
Interface Computer 10"/15"/17” NEMA4 panel system, IP10IA99 / IP15IA99 / IP17IA99 Panel system.
Do not use a hard or a pointed object (like screw drivers or pliers) to operate the touch screen, because
such an action will damage the surface of touch screen.
5.1.2 Front Panel Care and Cleaning (Chemical Resistance)
Mild detergent and water, or isopropyl alcohol is recommended for cleaning. Use of solvents with strong acidity or
alkalinity, which could react with the paint or printed color or plastic, should be avoided.
The overlay or the touch screen surface is subject to burning and scaring from direct heat sources such as lighters or
cigarettes. The front display is sealed against water and dust.
The front surface of the touch screen is a flexible plastic membrane, so care should be taken to avoid using sharp
objects such as blade of knife, pen or pencil tips. Sharp objects can permanently damage the functionality of the
touch screen.
The unit without a touch screen has a polycarbonate shield which might be scratched by an object sharp enough. For
detailed information, please refer to the following content.
Fig.5-14 : Chemical resistance for the area of textured paint

OIC Panel 10”/15”/17”- User Manual (Ver.1.02) Page 19
Chemical Properties
Resistance
Resistant to:
Alcohol
Diluted acids
Diluted alkalis
Ester
Hydrocarbon
Ketones
Household cleaning reagents
surfaces withstand exposure of more than 24 hours
duration under DIN 42 115 Part 2 to the mentioned
chemicals without visible change
NOTES:
Please remember that information and measurements mentioned above come from general known data. These tests
were done under the laboratory conditions, and don't represent an actual operation conditions. The relatively short
Lab test doesn't mean to meet all influences (e.g. possible additives or dirtiness) which can exist at long-term service.
Before using the front bezel, it is necessary to remember all conditions of each application and all possible impacts to
materials of front bezel. e.g. an injurious effect of some aggressive substances can be advanced by higher
temperatures. Also a permanent deformation or mechanical erosion of surfaces can reduce a chemical resistance of
used materials.
5.2. Bottom View
Fig.5-15 : I/O View
1
2 x USB 1.1/2.0 ports (Default) or 1x RS-232
port for Additional ( Extension )
8
1 x Power LED
2
1 x RS-232 port (COM3) (Default) or 2x USB
1.1/2.0 ports for Additional (Extension)
9
1x System Power Switch
3
2 x RS-232/422/485 ports (COM1, 2)
10
1 x Reset Switch
4
1x VGA port
11
1x 5-pin Terminal block connector
5
2x USB 1.1/2.0 ports
12
Panel mount holes
6
2x Gigabit Ethernet ports
13
Front panel of the system with seal at the rear side
7
1 x HDD LED