
— 2 —— 1 —
WWW.LTECH.CN
LT@LTECH.CN
Tel: +86 756 620 8811 Fax: +86 756 620 8833
44mm
30mm
175mm 86mm
36mm
86mm
170mm
DX3 RGB Touch Panel Manual DX3 RGB Touch Panel Manual
LTECH LTECH
warranty
5 years
RGB Touch Panel
R4-5A CV Receiver R4-CC CC Receiver
Input Voltage: AC100~240V
Output Signal: RF 2.4G + DMX512
RF Remote Distance: 30m
Control Mode: Sync Control
Input Voltage: DC5V~DC24V
Max Current Load: 6A × 3CH Max. 18A
Max Output Power: 90W/216W/432W(5V/12V/24V)
Working Temperature: -30℃~55℃
Package Size: L178×W48×H33(mm)
Weight(G.W.): 150g
Input Voltage: DC12V~DC48V
Output Voltage: DC3V~DC46V
Output Current: CC 350/700/1050mA×3CH
Output Power: 1.05W~48.3W×3CH Max 144.9W
Working Temperature: -30℃~55℃
Package Size: L178×W48×H33(mm)
Weight(G.W.): 165g
1. Technical Specs:
Working Temperature: -20℃~60℃
Package Size: L113×W112×H50(mm)
Weight(N.W.): 225g
Dx3
2. Product Size:
R4-5A/R4-CC Receiver Touch Panel
3. Installation Instruction:
4. Key Functions: 5. Terminals:
6. Operating Instruction for Receiver:
7. :The Learning ID Method
Canceling ID:
Short press “ID learning button” on the R4-5A/R4-CC receiver, the running light keeps
on. Then press any key or touch cycle on the DX3 touch panel, the running light
flickers several times, activated.
Learning ID:
Long press “ID learning button” on the R4-5A/R4-CC receiver for 5s, the running
light flickers several times, canceled.
t o u c h p a n e l
X
Current Selection
Switch
RUN
LED Lamp
Connection Socket
LED Lamp
Connection Socket
The Running Light
The Running Light
ID learning Button
ID learning Button
DC5V~24V
Power Input Socket
DC12V~48V
Power Input Socket
(Operation Table)
RUN
The Changing Mode (Press to Switch):
A. Static Red B. Static Green C. Static Blue D. Static Yellow E. Static Purple F. Static Cyan
G. Static White H. RGB Skipping I. 7 Colors Skipping J . RGB Smooth K. 7 Colors Smooth
Install Uninstall
X3
Long press to turn on/off the tone.
AC100-240V
Power Input Socket
DMX Signal
Output Socket
On/Off Touch Circle
Save Key
Long press to save
current static color or
changing effect.
Speed/
Brightness-
Speed/
Brightness+
Mode Key