AJA FiDO Series Operating instructions

www.aja.com
Installation and Operation
Guide
Because it matters.
Published: 4/27/2010
FiDO Series
SDI/Optical Fiber Mini Converters
FiDO-R
FiDO-2R
FiDO-T
FiDO-2T
FiDO-TR

2
Trademarks
AJA
®
, KONA
®
, Ki Pro®, and XENA
®
are registered trademarks of AJA Video, Inc. FiDO™, Io HD
™
and Io
™
are trademarks of AJA Video, Inc. HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC. DVI is a registered trademark of DDWG.
All other trademarks are the property of their respective holders.
Notice
Copyright © 2010 AJA Video, Inc. All rights reserved.All information in this manual is subject to
change without notice.No part of the document may be reproduced or transmitted in any form, or by
any means,electronic or mechanical, including photocopying or recording,without the express
written permission of AJA Inc.
FCC Emission Information
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.This
equipment generates,uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense. Changes or modifications not
expressly approved by AJA Video can effect emission compliance and could void the user’s authority
to operate this equipment.
Contacting Support
To contact AJA Video for sales or support, use any of the following methods:
180 Litton Drive, Grass Valley, CA. 95945 USA
Telephone: [phone] or 530.274.2048
Fax: [phone]
Web: http://www.aja.com
Support Email: suppor[email protected]
Sales Email: [email protected]
When calling for support, have all information at hand prior to calling.
Limited Warranty
AJA Video warrants that this product will be free from defects in materials and workmanship for a
period of five years from the date of purchase. If a product proves to be defective during this warranty
period, AJA Video, at its option, will either repair the defective product without charge for parts and
labor, or will provide a replacement in exchange for the defective product.
In order to obtain service under this warranty, you the Customer, must notify AJA Video of the defect
before the expiration of the warranty period and make suitable arrangements for the performance of
service.The Customer shall be responsible for packaging and shipping the defective product to a
designated service center nominated by AJA Video, with shipping charges prepaid.AJA Video shall
pay for the return of the product to the Customer if the shipment is to a location within the country in
which the AJA Video service center is located.Customer shall be responsible for paying all shipping
charges, insurance, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or
inadequate maintenance and care. AJA Video shall not be obligated to furnish service under this
warranty a) to repair damage resulting from attempts by personnel other than AJA Video
representatives to install, repair or service the product, b) to repair damage resulting from improper
use or connection to incompatible equipment, c) to repair any damage or malfunction caused by the
use of non-AJA Video parts or supplies,or d) to service a product that has been modified or integrated
with other products when the effect of such a modification or integration increases the time or
difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY AJA VIDEO IN LIEU OF ANY OTHER WARRANTIES,EXPRESS OR IMPLIED.
AJA VIDEO AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. AJA VIDEO’S RESPONSIBILITY TO REPAIR OR REPLACE
DEFECTIVE PRODUCTS IS THE WHOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR
ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER AJA
VIDEO OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

1
3
AJA FiDO-Series SDI/Optical Fiber Converters, User Manual — Introduction
Introduction
FiDO is a family of SDI/Optical Fiber converters. FiDO allows the transport of
SDI, HD-SDI, and 3G SDI over distances up to 10km using standard single-mode
fiber optic cable with LC connectors. FiDO converters meet all relevant SMPTE
specifications and are rugged, versatile, and suitable for indoor or outdoor use.
With 5 models, FiDO offers unmatched flexibility and cost efficiency. FiDO dual
channel models allow the conversion of 2 channels – perfect for 3D, dual-link
SDI, or 2 completely independent SDI channels (for example, SD, HD, and 3G
can be mixed in any combination). Also, FiDO converters offer electrical
isolation useful for eliminating ground loop problems.
FiDO converters come in a compact, low-profile enclosure for use in tight
spaces around and behind equipment racks, trucks and crowded facilities.
Features
• Transport of SDI, HD-SDI, and 3G HD-SDI over single mode optical fiber
• Auto-detection of video format
• LC fiber connectors
• Simplex or duplex models available
• All inputs, either SDI or fiber, are equalized and re-clocked
• ASI compatible
• Useful for eliminating ground loop problems
• 5-20VDC power supply (supply sold separately)
• 5 year warranty
FiDO models
• FiDO-R: Single channel Fiber to SDI converter with dual SDI outputs
• FiDO-2R: Dual channel Fiber to SDI converter
• FiDO-T: Single channel SDI to Fiber converter with looping SDI output
• FiDO-2T: Dual channel SDI to Fiber converter
• FiDO-TR: SDI/Fiber transceiver
Accessories
• DWP: Universal power supply (North American connector)
• DWP-U: Universal power supply (International power cord socket,
IEC-320)
• Rack mount bracket
• 4 pin XLR power cable

4
Block Diagrams
FiDO Converters, Simplified Block Diagram
Optical
Fiber
Out
Optical
Fiber
Out
SD-SDI, HD-SDI, or 3G-SDI
Input
SD-SDI, HD-SDI, or 3G-SDI
Loop Thru Output
SD-SDI, HD-SDI, or 3G-SDI
Input
Equalize &
Reclock
Optical
Transmitter
SD-SDI, HD-SDI, or 3G-SDI
Loop Thru Output
Optical
Fiber
Out 1
SD-SDI, HD-SDI, or 3G-SDI
Input 1
Optical
Transmitter
Optical
Fiber
Out 2
SD-SDI, HD-SDI, or 3G-SDI
Input 2
Optical
Transmitter
FiDO-T
Optical
Fiber
Input
SD-SDI, HD-SDI, or 3G-SDI
Output
Optical
Receiver
FiDO-R
Optical
Fiber
Input
SD-SDI, HD-SDI, or 3G-SDI
Output
Optical
Receiver
Optical
Receiver
FiDO-TR
Optical
Fiber
Input 1
SD-SDI, HD-SDI, or 3G-SDI
Output 1
Optical
Receiver
Optical
Fiber
Input 2
SD-SDI, HD-SDI, or 3G-SDI
Output 2
Optical
Receiver
FiDO-2R
FiDO-2T
Equalize &
Reclock
Equalize &
Reclock
Equalize &
Reclock
Equalize &
Reclock
Equalize &
Reclock
Equalize &
Reclock
Equalize &
Reclock

1
5
AJA FiDO-Series SDI/Optical Fiber Converters, User Manual — I/O Connections
I/O Connections
FiDO Converter Inputs/Outputs
Notes:
1. FiDO requires the use of "single mode, 1310nm compatible" fiber optic cable.
2.The "lock" indicator for optical receivers (R, 2R, and TR) may flicker or glow dim with
the optical input disconnected.
Installation
Typically, installation consists of the following steps:
1. Connect video equipment to the FiDO convertor Optical LC fiber connector and
BNCs. On dual units, or the transceiver, either two "Simplex" (single) LC cables
can be used, or a single "Duplex" LC cable.
2. Apply +5 to 20VDC power to the converter (AJA power supply model DWP or
DWP-U recommended).
No configuration or settings are required. Once powered, the FiDO converters will
begin converting applied fiber/SDI signals.
simplex
connection
(LC connector)
SDI, HD-SDI or 3G
OUTPUT
Second SDI
output
(DA: same signal)
POWER
5-20 VDC
OPTICAL
IN
SDI
OUT
SDI
OUT
FiDO-R
PWR OPT
OPTICAL FIBER TO SD/HD/3G SDI
2 simplex
or
1 duplex
connection
(LC connector)
2 Independent
Channels of SDI
,
HD-SDI or 3G
POWER
5-20 VDC
OPTICAL
IN 2
OPTICAL
IN 1
SDI
OUT 2
SDI
OUT 1
FiDO-2R
PWR OPT 2 OPT 1
DUAL OPTICAL FIBER TO SD/HD/3G SDI
simplex
connection
(LC connector)
SDI, HD-SDI or 3G
Input
Reclocked
loop-thru of
SDI input
POWER
5-20 VDC
OPTICAL
OUT SDI
IN
SDI
OUT
FiDO-T
PWR SDI
SD/HD/3G SDI TO OPTICAL FIBER
2 simplex
or
1 duplex
connection
(LC connector)
2 Independent
Channels of SDI,
HD-SDI or 3G
POWER
5-20 VDC
OPTICAL
OUT 1
OPTICAL
OUT 2
SDI
IN 1
SDI
IN 2
FiDO-2T
PWR SDI 1 SDI 2
DUAL SD/HD/3G SDI TO OPTICAL FIBER
POWER
5-20 VDC
OPTICAL
OUT
OPTICAL
IN
SDI
IN
SDI
OUT
FiDO-TR
2 simplex
or
1 duplex
connection
(LC connector)
2 Independent
Channels of SDI
,
HD-SDI or 3G
PWR OPT SDI
OPTICAL FIBER - SD/HD/3G SDI TRANSCEIVER
LED Legend (when lit)
PWR: Power ON
OPT <n>: Optical input
detected and locked
SDI <n>: SDI input
detected and locked

6
Warning!
Active fiber-optic cables emit radiation invisible to the human eye.Do not look
directly at the end of an active fiber-optic cable or the fiber connector on a
FiDO-TR,FiDO-T, or FiDO-2T; these three models are Class 1 Laser Products.
Shown above: FiDO to Duplex LC connection. Insert cable connector until it latches.
FiDO-TR, FiDO-2T, and FiDO-2R all require either a duplex cable or two simplex cables.
FiDO-T and FiDO-R only require a single simplex cable connected to the optical port
on the converter pointed to by the arrow (Optical In on FiDO-R or Optical Out on
FiDO-T). FiDO requires "single mode, 1310nm compatible" fiber optic cable.
Specifications
Item Specification
Formats 3Gb, 1.5Gb, 270Mb, Auto Select
Video Inputs/Outputs SDI (SMPTE 259/292/296/424), 2x BNC
I x Single mode optical fiber, LC connector (FiDO-R, FiDO-
T)
2x Single mode optical fiber, LC connectors (FiDO-2R,
FiDO-2T, FiDO-TR)
Cable Equalization (BNC inputs,
1694 coax)
270mb, 400m
1.5Gb, 200m
3Gb, 140m
Input/Output Return Loss (BNC) >15db, 270Mb - 3Gb
Optical Outputs Wavelength: 1310 nm
Output Power: -2dBm typical
Size 4.6" x 1.71 " x.85" (117 x 43.5 x 21.6mm)
Power +5-20 VDC
1.5 watts (FiDO-T, FiDO-R)
2.5 watts (FiDO-2R, FiDO-2T, FiDO-TR)
Requires Power Supply
(AJA power supply model DWP or DWP-U recommended)