Akyga AK-NC Series User manual

AK-NC Series - user manual
www.akyga.com
Short description of the product
The product is compatible with the applicable national and European requirements.
What is in the box?
- The charging cart for laptops and tablets
Symbols explanation:
There is a risk of losing health or life (e.g. by electic shock).
There is a particular danger connected with service.
Important tips and information.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
p. 1
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the power supply for other purposes than those described,
the product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
The mobile cabinet for storing, charging and transporting a mobile computers. This will allow to charge
10, 16, 20, 30 or 32 devices at the same time depending on the number of shelves in a cart model.
The product is suitable for mains voltage 230 V, 50/60 Hz.
laptop and tablet charging cart
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
EC
BOX
Ecological Solutions
GREEN
The device is intended only for domestic use, indoors.

AK-NC Series - user manual
p. 2
Safety Precautions
WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power
supply, do not place it in restricted ventilation area. Also, do not allow the working power supply to touch
soft surface such as pillows, blankets or clothing. The power supply meets the limits on the surface
temperatures available to the user, as defined in the International Standard for Safety of Information
Technology Equipment (IEC 60950).
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet . Discharging
electrostatic charges from fingers or other electrostatic conductors can damage electronic
components. To avoid damaging the computer, abstain from touching electrical outlets, wires
and electonic circuits. The user’s contact with electronic components should be kept to a
minimum.
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
źIf the product has been damaged, does not work properly or has been stored for a long period
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is
essential to stop using the product and to protect it against re-use for security purposes.
źWhen disconnecting the power cord from the socket, do not pull on the cord, but only on the
part of the cable plug provided for this purpose.
źAll maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
źPower cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
źKeep the product and the packaging out of range of children and animals. The package
includes a foil that child could choke while playing.
źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping
or crushing may cause its damage.
źIts forbidden to modify the power cord. In the case of modifications, the cable may be
damaged, causing threats to life, health and property.
źMake sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or
mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away
from heat sources (such as stoves, radiators, fireplaces).
źProduct and power cord should not be touched with moist or wet hands under no
circumstances.
źIn case of any doubts regarding operation, safety or connection of the product, please contact
the manufacturer or a qualified specialist for this purpose.
laptop and tablet charging cart

AK-NC Series - user manual
p. 3
laptop and tablet charging cart
2. Place the cart at the target place of use.
3. Secure the carty with the brakes on the wheels to prevent it from moving unintentionally.
5. Place the laptops and tablets one by one in the designated places with the assigned power
sockets and plug them in.
6. Turn the cart's main switch from off to on, the indicator light will show that the unit is in operation.
7. After the device has started up, charging of the tablets will take place.
8. When charging is complete, turn off the device and unplug it from the power outlet.
1. Unpack the cart from its protective packaging.
9. The next time you use it, follow the procedure from the beginning.
4. Connect the cart to an existing installation equipped with current protection and earth leakage
circuit breaker via a socket with an earthing pin.
Usage:
1. The maximum load of the device must not exceed 16 A.
2. The device could be connected to a ~230 V mains supply.
3. The cart is suitable for indoor use, it should not be exposed to outdoor weather conditions.
4. The maximum load of the inner shelves of the cart is 15 kg.
8. Laptop/notebook battery cells exposed to high temperatures can explode and cause a fire.
7. Before moving the unit, make sure the main switch is in the off position and the unit is
disconnected from the electrical system.
6. Keep an eye on the connected device and monitor its operation.
10. Do not tamper with the design or functionality of the unit yourself, you may risk electric shock.
5. The unit may heat up during battery charging. This is due to the transfer of heat energy from
charging laptop/notebook batteries.
9. Do not unplug the cart with any devices connected to it.
Disclaimers:
1. Clean the device only when it is disconnected from the electrical system without using strong
detergents, with a damp cloth. Make sure that the detergent used has evaporated before
conecting cart to the power.
3. Use a carrying handle to move the cart.
4. Any repairs, adjustments or tampering with the product must be carried out only by qualified
persons.
2. When the cart is not in use, store it disconnected from the electrical installation, with the brakes on
the wheels secured, with the lock closed, indoors and out of the weather.
Maintenance and Storage:
Product manufacturer: Akyga Europe sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
3. Reconnect the power cord to the electrical system.
1. Turn the main power switch to the off position.
2. Disconnect the power cord from the electrical system and wait 30 seconds.
To reset device, follow these steps:
4. Turn the main power switch to the on position.
5. The indicator light should indicate that the unit is operating.
Reset the device: