Husqvarna DC 1000S User manual

Article 588 20 88-04
12 cu ft STEEL SWIVEL DUMP CART
6002409 - REV E 02/23
DC 1000S
READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS BEFORE USING THIS EQUIPMENT
U.S. Patent No. 8,496,298

This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Read and understand all safety rules and operating instructions before using this
tractor attachment.
Follow all safety rules and operating instructions provided by your vehicle's
manufacturer when using attachment.
Never allow children or untrained persons to operate vehicle or attachment.
Do not exceed the vehicle manufacturer's towed weight limit.
Reduce vehicle speed and allow extra stopping distance when towing heavy
loads.
Reduce vehicle speed and towed weight when operating on slopes.
Operate up and down slopes, never across the face of slopes.
Do not carry passengers on vehicle or attachment.
Avoid sudden turns or maneuvers.
Do not tow attachment on public roadways.
Do not remove warning decals from product.
Check product for worn, loose, or damaged parts before each use. If any damage
is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or replace
fasteners as needed before using.
Do not exceed vehicle speed of 6 miles per hour when towing Dump Cart.
Do not exceed Dump Cart rated weight capacity of 1000 pounds.
1
Safety Rules

If this product fails due to a defect in material or workmanship within THREE YEARS from the
date of purchase, we will at our option, only with receipt of purchase, repair or replace it free of
charge. This warranty excludes tires, bushings, and bearings which are expendable and become
worn during normal use.
This warranty does not cover:
Repairs necessary because of operator abuse or negligence. •
Equipment used for commercial or rental purposes. •
Paint that is worn or faded due to normal use or exposure. •
To arrange for product repair visit ohiosteel.com/customer-support and fill out the warranty
repair form. You can also call 1-800-652-2321, ext. 212 to speak to our Customer Service Team.
This warranty gives you specific legal rights, and you may also have other rights which may vary
from state to state. This warranty applies only while this product is in use in the United States.
IF YOU ARE MISSING PARTS DO NOT RETURN TO STORE
Email [email protected] or call 1-800-652-2321, ext. 212
Before you call, please email our customer service team at
[email protected] with the following :
A description of the issue you are experiencing. 1.
Photos of the issue that include an overall view and detailed view from 2.
multiple angles.
If applicable, a short video showing the issue. 3.
Replacement Parts:
You can place your parts order online at ohiosteel.com/parts-store
You can also reach our Customer Service Department at 1-800-652-2321, ext. 212 •
If you are ordering replacement part(s) for your product, please note that some parts are •
only available as a repair kit.
Attach Receipt Here:
2
Warranty

2 (x1)1 (x1)
3
TOOLS REQUIRED FOR ASSEMBLY:
(x1)
• 1/2" Wrench or Socket • Large Flat Screwdriver
(x1)8
(x1)7
(x1)
9 (x1)
(x1)10
(x2)29
(x1)30
(x4)28
(x46)35
(x46)34
(x1)33
(x3)31
(x2)11
4
(x1)
(x1)12
(x1)6
5 (x2)
3
Carton Contents

12
35
34
B
35
12
34
6
35
34
Place Body Halves (1 & 2) on a smooth, flat surface so they are square. Fasten
together with hardware as shown.
Attach Front Support (12) to Steel Body and tighten hardware as shown.
Attach Undercarriage (6) to body and tighten hardware as shown.
4
Assembly Instructions
1
3
2

C
3
34
35
D
34
5
35
10
30
SWIVEL CLEVIS
Attach Front Gate (3) to inside of the body and tighten hardware as shown.
Attach Corners (5) to the two front body joints and tighten hardware as shown.
Insert Axle (10) into Undercarriage (6) halfway as shown. Center 3-1/8" Spacer
(30) inside Swivel Clevis and align with Axle (10).
5
Assembly Instructions
4
6
5

29
11
28
31
34
935
E
BEHIND
FLANGE
Slide Axle (10) completely through Undercarriage (6); Swivel Clevis and Spacer
(30) must be captured by Axle (10). Align Drawbar with the Front Support (12)
and press down to latch.
Slide Washers (28), Spacers (29), and Wheels (11) onto Axle and secure
with Hairpins (31) as shown.
Attach the Support Bar (9) to body behind flange loosely as
shown.
6
Assembly Instructions
7
9
8

G
34
8
7
35
TIGHTEN BOLTS ON SUPPORT BAR
4
33
32
Attach Retainers (7 and 8) to rear body joint and tighten with hardware as shown.
Tighten Support Bar hardware. Any additional Bolts (34) and Nuts (35) can be
safetly discarded.
Attach Tailgate (4) to body as shown. No hardware required, tailgate should
move freely up or down.
Install Hitch Pin (33) and Hairpin (32) to secure to attachment vehicle.
7
Assembly Instructions
10
12
11

Periodic Maintenance:
Tighten fasteners as needed before each use •
Check tire pressure before each use •
How to Use Dump Cart:
Attach Dump Cart to your tractor using the supplied hitch pin. 1.
Do not exceed 1000 pounds when loading material into the cart body. 2.
Distribute the weight of the load as evenly as possible in the cart body for 3.
best handling.
When hauling heavy loads, verify that your vehicle has adequate towing and 4.
braking capacity.
Do not exceed 6 miles per hour when towing Dump Cart. 5.
Before Using Dump Cart:
Check tire pressure and inflate to 30 psi if needed. 1.
Read all Safety Rules found on page 1. 2.
How to Empty Dump Cart:
Step down the foot pedal to release the latch mechanism. 1.
Lift the body and swivel as desired to guide the material to preferred 2.
location.
Lift the body entirely and empty material. 3.
Lower the body and guide the latch into the drawbar and relatch. 4.
8
Operating Instructions

9
Repair Parts
13
31
5
31
734
4
8
9
2
12
33
14
22
32
16
15
16
24 27 24
16
20
21
17
18
19
30
6
28
11
35
29
28
10
25
23 26
ITEM PART NO DESCRIPTION QTY
1401011-O1 BODY HALF, RIGHT (HQ ORANGE) 1
2401021-O1 BODY HALF, LEFT (HQ ORANGE) 1
3401031-O1 GATE, FRONT, 30″ (HQ ORANGE) 1
4401041-HG TAILGATE, 30″ (HQ GRAY) 1
5401051-O1 CORNER GUARD (HQ ORANGE) 2
6401061-HG UNDERCARRIAGE (HQ GRAY) 1
7401071-O1 RETAINER GATE, RIGHT (HQ ORANGE) 1
8401081-O1 RETAINER, GATE, LEFT (HQ ORANGE) 1
9401131-O1 SUPPORT BAR, REAR, 30″ (HQ ORANGE) 1
10 300001 AXLE, 3/4″ X 32.375″ 1
11 6002415 WHEEL, 4.80-8 X 3/4″ (SILVER) 2
12 6000310-HG SUPPORT, FRONT, SD (HQ GRAY) 1
13
KIT
6000665-BH
DRAWBAR, SD (BLACK) 1
14 BRACKET, HITCH (BLACK) 1
15 HEX BOLT, 3/8-16 X 3/4″ (BLACK) 2
16 HEX NUT, 3/8-16 C-LOCK (BLACK) 6
17 CLEVIS, SWIVEL, 3/4″ (BLACK) 1
18 WASHER, SPRING, 1/2″ 1
19 SHOULDER BOLT, 1/2" X 3/8" 1
ITEM PART NO DESCRIPTION QTY
20
KIT
6000665-BH
WASHER, 3/8" USS (ZINC) 1
21 WASHER, 1/2" USS (ZINC) 1
22 FOOT PEDAL (HQ GRAY) 1
23 BUSHING, FOOT PEDAL 2
24 HEX BOLT, 3/8-16 X 3-1/2″ (BLACK) 2
25 HEX BOLT, 3/8-16 X 3″ (BLACK) 1
26 LATCH, SWIVEL DUMP (Y. ZINC) 1
27 SPRING, LATCH, 4-3/4″ 2
28
KIT
6004323
WASHER, 3/4" SAE (ZINC) 4
29 SPACER, 3/4 x 1.25" 2
30 SPACER, 1 x 3.125" 1
31 COTTER HAIRPIN, 3/32" X
2-5/16" (ZINC) 2
32 KIT
6000770
COTTER HAIRPIN, 3/32" X
2-5/16" (ZINC) 1
33 PIN, HITCH, 1/2" X 3" (ZINC) 1
34 KIT
6004322
TRUSS HD SCREW, 5/16-18
X 3/4" (BLACK) 46
35 SPINNER GRIP NUT, 5/16-18 (BLACK) 46