Alaterre Furniture ANTH1425 User manual

Alaterre Furniture
Console Table with Drawer
Thank you for purchasing the Console Table with Drawer from ALATERRE FURNITURE. We havefoundithelpful tohave a
second person present during the assemblyprocess.
End table Assembly Instructions
Parts
NO. DRAWING DESCRIPTION QTY
ATOP FRAME 1
NO. DRAWING DESCRIPTION QTY
7/9/2018 1 of 3 Console Table with drawer
ALLEN KEY 1
16
M6x20MM BOLT
B1
D
C
SHELF
4
METAL LEG
4
3.5X12MM BOLT
E
F
A
B
C

Step 1
Read through these instructions thoroughly before beginning assembly. We have found this to be of
great value when assembling this product.
Step 2
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface to prevent damage to the finish
Step 3
Lay Top Frame Assembly (A) upside down on a non abrasive surface. Attach Metal Leg (C) to Top
Frame (A) using 16-M6x20MM Hex Bolts (D). NOTE: DO NOT TIGHTEN ALL BOLTS AT THIS TIME !
Attach Shelf (B) to tab on Metal Legs (C) using 4-3.5x12MM Wood Screws (E). NOTE: TIGHTEN ALL
BOLTS AT THIS TIME !
D
F
7/9/2018 2 of 3
D
F
A
C
C
Console Table with drawer

E
CARE
Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
REPLACEMENT PARTS:
For best service, to order replacement parts go to www.alaterrefurniture.com. Use the order form on the
website to order your replacement parts. Thank You!
7/9/2018 3 of 3
E
Step 4
Attach knob to outside of drawer front.
knob
knob screw
knob
knob screw
Console Table with drawer