Alcatel-Lucent 9363 Guide

DDCC-ChungLi
Document is
Released
2011.06.30
13:31:41 +08'00'

Title page
Alcatel-Lucent 9363
Metro Cell - Indoor V2 2100MHz and 1900/850MHz
Installation and commissioning
401-387-097
Issue 1
May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Use pursuant to applicable agreements
<附件>

Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2011 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
Use pursuant to applicable agreements
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements

Contents
About this document
Purpose ............................................................................................................................................................................................ viivii
Reason for revision ..................................................................................................................................................................... viivii
New in this release ...................................................................................................................................................................... viivii
Intended audience ....................................................................................................................................................................... viivii
Supported systems ...................................................................................................................................................................... viivii
How to use this document ....................................................................................................................................................... viiiviii
Safety information ..................................................................................................................................................................... viiiviii
Prerequisites ................................................................................................................................................................................. viiiviii
Conventions used ....................................................................................................................................................................... viiiviii
Related information ................................................................................................................................................................... viiiviii
Document support ........................................................................................................................................................................ ixix
Technical support .......................................................................................................................................................................... ixix
How to order ................................................................................................................................................................................... ixix
How to comment ........................................................................................................................................................................... ixix
1Safety statements
Overview ...................................................................................................................................................................................... 1-11-1
Structure of safety statements ............................................................................................................................................... 1-21-2
Safety ........................................................................................................................................................................................... 1-41-4
Safety - specific hazards ......................................................................................................................................................... 1-51-5
Product safety ............................................................................................................................................................................. 1-81-8
2Product overview
Overview ...................................................................................................................................................................................... 2-12-1
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements iii

Functional description ............................................................................................................................................................. 2-22-2
Physical description ................................................................................................................................................................. 2-52-5
3Metro Cell installation and commissioning
Overview ...................................................................................................................................................................................... 3-13-1
Pre-installation information .................................................................................................................................................. 3-23-2
To mount the hardware to a wall or ceiling ..................................................................................................................... 3-43-4
Metro Cell - Indoor cabling .................................................................................................................................................. 3-83-8
Metro Cell - Indoor commissioning process ................................................................................................................ 3-143-14
Post installation activities and checks ............................................................................................................................. 3-153-15
4Product specifications
Overview ...................................................................................................................................................................................... 4-14-1
Environmental and regulatory specifications ................................................................................................................. 4-24-2
AMetro Cell - Indoor wall mount spacer
Overview ..................................................................................................................................................................................... A-1A-1
Wall mount spacer ................................................................................................................................................................... A-2A-2
BProduct conformance statements
Overview ..................................................................................................................................................................................... B-1B-1
European Union ........................................................................................................................................................................ B-2B-2
United States .............................................................................................................................................................................. B-6B-6
Glossary
Index
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
iv Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011

List of figures
2-1 Alcatel-Lucent 9363 Metro Cell - Indoor ........................................................................................................ 2-22-2
2-2 Alcatel-Lucent 9363 Metro Cell - Indoor (2100 MHz variant) ................................................................ 2-52-5
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements v

About this documentAbout this document
Purpose
The purpose of this document is to provide hardware installation instructions for the
Alcatel-Lucent 9363 Metro Cell - Indoor V2 2100MHz. and 1900/850MHz.
Procedures are provided for product handling, placement, grounding, powering on and
off, and cabling.
Reason for revision
The reissue reasons are:
Issue number Issue Date Reason for reissue
1 May 2011 Standard issue
New in this release
New features:
•None
Other changes:
•None
Intended audience
The audience for this document is Installation personnel.
Supported systems
This document applies to the Alcatel-Lucent 9363 Metro Cell - Indoor V2 2100MHz and
1900/850MHz
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements vii

How to use this document
Start with the first chapter and work through the manual to the end. Once you have done
this, you will have carried out the hardware installation completely and in the proper
sequence.
Prior to installing the product, the installer should be familiar with the safety precautions,
warnings, and product conformance statements.
Safety information
For your safety, this document contains safety statements. Safety statements are given at
points where risks of damage to personnel, equipment, and operation may exist. Failure to
follow the directions in a safety statement may result in serious consequences.
Prerequisites
None
Conventions used
Vocabulary conventions
None
Typographical conventions
None
Related information
For information on subjects related to the content of this document, refer to the
documents listed in the following table:
Refer to this document At this location For more information on
Alcatel-Lucent W-CDMA
System - Safety Guide,
401-382-880
http://support.alcatel-lucent.
com.
Safety guidelines and the
catalog of hazard statements
that appear in the
Alcatel-Lucent W-CDMA
customer documents.
Alcatel-Lucent 9364 Metro
Cell Indoor and Outdoor
Troubleshooting,
401-387-076
http://support.alcatel-lucent.
com.
Troubleshooting procedures
for the Metro Cell Indoor
Standard for Installation of
Lightning Protection Systems,
NFPA
Lightning protection systems
About this document
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
viii Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011

Refer to this document At this location For more information on
Recommended Practices on
Surge Voltages in Low
Voltage AC Power Circuits,
IEEE C62.41 (Latest Edition)
Power
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
one of the following telephone numbers:
•1-888-582-3688 (for the United States)
•1-317-377-8618 (for all other countries)
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com).
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/enus/) or e-mail your comments to the Comments Hotline
([email protected]).
About this document
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements ix

About this document
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xAlcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011

11Safety statements
Overview
Purpose
This chapter provides general information on the structure of safety instructions and
summarizes general safety requirements.
General safety and residual risk
The equipment has been developed in line with state-of-the-art technology and conforms
with current national and international safety requirements.
The equipment is considered safe during normal operation when safe working practices
are complied with. However, hazards may arise if procedures are not followed correctly
or safe working practices are not complied with.
Contents
Structure of safety statements 1-2
Safety 1-4
Safety - specific hazards 1-5
Product safety 1-8
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements 1-1

Structure of safety statements
Overview
Safety statements describe the safety risks relevant while performing tasks on
Alcatel-Lucent products during deployment and/or use. Failure to avoid the hazards may
have serious consequences.
General structure
Safety statements include the following structural elements:
Item Structure element Purpose
1 Safety alert symbol Indicates the potential for personal injury
(optional)
2 Safety symbol Indicates hazard type (optional)
3 Signal word Indicates the severity of the hazard
4 Hazard type Describes the source of the risk of damage or
injury
5 Safety message Consequences if protective measures fail
6 Avoidance message Protective measures to take to avoid the hazard
7 Identifier The reference ID of the safety statement
(optional)
SAMPLE
BC D
EF
G
H
Lifting this equipment by yourself can result in injury
due to the size and weight of the equipment.
Always use three people or a lifting device to transport
and position this equipment. [ABC123]
CAUTION
Lifting hazard
Safety statements Structure of safety statements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-2 Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011

Signal words
The signal words identify the hazard severity levels as follows:
Signal word Meaning
DANGER Indicates an extremely hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE Indicates a hazardous situation not related to personal injury.
Safety statements Structure of safety statements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements 1-3

Safety
General precautions for installation procedures
WARNING
Failure to observe these safety precautions may result in personal
injury or damage to equipment.
•Read and understand all instructions.
•Follow all warnings and instructions marked on this product.
•Installation and maintenance procedures must be followed and performed by
trained personnel only.
•The equipment must be provided with a readily accessible disconnect device
as part of site preparation.
•Grounding and circuit continuity is vital for safe operation of the equipment.
Never operate the equipment with grounding/bonding conductor
disconnected.
•Install only equipment identified in the product's installation manual. Use of
other equipment may result in an improper connection which could lead to
fire or injury.
•Use caution when installing or modifying telecommunications lines.
•The product has multiple power inputs. Before servicing, Disconnect all
inputs to reduce the risk of energy hazards.
•For continued protection against risk of fire, all fuses used in this product
must be replaced only with fuses of the same type and rating.
•Never install telecommunications wiring during a lightning storm.
•Never install telecommunications connections in wet locations.
•Never touch uninsulated wiring or terminals carrying direct current or
ringing current, and never leave this wiring exposed. Protect and tape
uninsulated wiring and terminals to avoid risk of fire, electrical shock, and
injury to personnel.
•Never spill liquids of any kind on the product.
•To reduce the risk of an electrical shock, do not disassemble the product.
Opening and removing covers and/or circuit boards may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electrical
shock when the unit is subsequently used.
Safety statements Safety
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-4 Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011

Safety - specific hazards
DANGER
Electric-shock hazard
Working in severe weather can result in personal injury or death and damage to the
equipment.
Never install or perform maintenance during severe weather (high winds, lightning,
blizzards, hurricane etc.).
DANGER
Noxious-substance hazard
Use of unspecified cleaning agents can result in personal injury.
Use only specified cleaning agents. Never use flammable solvents.
Always ensure there is adequate ventilation in the work area and wear the appropriate
personal protective equipment.
WARNING
Electric-shock hazard
Some parts of all electrical installations are energized. Failure to observe this fact and
the safety warnings may lead to bodily injury and property damage.
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 + A1 or EN 60215) may install or service the installation.
WARNING
Electric-shock hazard
The power supply lines to the network element are energized. Contact with parts carrying
voltage can cause health problems, possibly including death, even hours after the event.
Open and lockout the load disconnect switch in the distribution box to completely
de-energize the network element.
Safety statements Safety - specific hazards
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements 1-5

WARNING
Electric-shock hazard
This product may be connected to an AC main power supply and may contain an internal
battery supply. Disconnecting one power source may not de-energize the system, and can
lead to serious injury.
Disconnect and lock out the AC main power supply, if present, and the internal battery
supply, if present, before servicing the equipment.
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges.
The following rules must be complied with when handling any module containing
semiconductor components:
•Wear conductive or antistatic working clothes (for example, coat made of 100%
cotton).
•Wear the grounded wrist strap.
•Wear shoes with conductive soles on a conductive floor surface or conductive work
mat.
•Leave the modules in their original packaging until ready for use.
•Make sure there is no difference in potential between yourself, the workplace, and the
packaging before removing, unpacking, or packing a module.
•Hold the module only by the grip without touching the connection pins, tracks, or
components.
•Place modules removed from the equipment on a conductive surface.
•Test or handle the module only with grounded tools on grounded equipment.
•Handle defective modules exactly like new ones to avoid causing further damage.
NOTICE
Condensation
Sudden changes in the weather may lead to the formation of condensation on
components. Operating the unit when condensation moisture is present can destroy the
unit.
Units which show signs of condensation must be dried before installation.
Safety statements Safety - specific hazards
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-6 Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011

NOTICE
Tools
Tools left in the working area can cause short circuits during operation which can lead to
the destruction of units.
Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,
have been left in or on the equipment.
CAUTION
Hot-surface hazard
Touching a hot heater may cause burns.
Do not touch the heaters.
Before touching the units wait until they have cooled down, wear safety gloves and
clothes.
NOTICE
Corrosive-substance hazard
Cleaning plastic containers and lids with abrasive and aggressive cleaning agents may
cause permanent damage.
Do not use solvents, paraffin, abrasive or aggressive cleaning fluids, abrasive or
aggressive antiseptic agents or abrasive or aggressive materials.
NOTICE
Service-disruption hazard
Cleaning with water or a high-pressure cleaner will damage the components in the
cabinet.
The washing down of the equipment or cabinet with water or a high-pressure cleaner is
not permitted.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Safety statements Safety - specific hazards
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements 1-7

Product safety
Equipment safety
Safety information for this equipment can be found on various Caution, Warning, Danger,
information labels or instructions affixed to or included with the cabinet, its internal
assemblies or included within this document. Informational and cautionary labels may
appear near the item they address or may be grouped in a single location on the
equipment. Warnings are typically adjacent to the hazard that is noted on the label. The
instructions, cautions and warnings found on these labels must be understood and
observed by all personnel involved with the equipment installation and maintenance.
Safety statements Product safety
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-8 Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011

22Product overview
Overview
Purpose
This chapter provides an overview of the Alcatel-Lucent 9363 Metro Cell - Indoor.
Contents
Functional description 2-2
Physical description 2-5
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements 2-1

Functional description
General description
The 9360 Small Cell solution has been developed to handle the increased demand of
solutions to efficiently address the residential fixed and mobile market.
The Alcatel-Lucent 9363 Metro Cell - Indoor is a public area wireless access node that
collapses the traditional 3G Node B and RNC functions into a single small unit.
Product deployment
The product can be deployed by mobile operators to provide a transparent indoor capacity
layer to complement the macro cell “umbrella” coverage layer. In the case of private
locations, such as coffee shops or restaurants, the Metro Cell may be privately owned and
may be deployed by building owners or local governments but remain controlled by the
operator using their spectrum resources.
Figure 2-1 Alcatel-Lucent 9363 Metro Cell - Indoor
Front view
Back view
Product overview Functional description
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-2 Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011