Alcatel OneTouch BoomBand User manual

1
User Manual
English - CJA33NAALAAB

2
Contents
1 Your BoomBand...........................................................................3
2 Pairing..............................................................................................6
3 Walk tracking................................................................................9
4 Sleep tracking..............................................................................11
5 Call reminder ..............................................................................13
6 Anti-loss alert .............................................................................14
7 Silent alarm ..................................................................................15
8 ROM Upgrade.............................................................................16
Troubleshooting................................................................................17
Safety and use....................................................................................18
General information........................................................................19
Warranty............................................................................................ 20

3
1
Your BoomBand
1.1 What’s included
Your BoomBand box includes:
• Corebox
• Wristband
• Charger
• BoomBand User Manual
Corebox Charger Wristband

4
1.2 Charging your BoomBand
Insert the Corebox into the charger, as shown by the arrow in the
following picture. Ensure that the icons on the Corebox match those
on the charger.
• Pre-charging: If the BoomBand batteries are completely flat, the
LED lights will only begin to indicate after several minutes' charging.
• Charging: The LED lights will indicate progressively on your
BoomBand and blink every 5 seconds.
• Fully charged: Five lights are on and blinking every 30 seconds.
Battery type Standby time Charging time
Lithium-polymer
battery
3-5 days About 1.5 hours

5
1.3 Installation
Insert one end of the Corebox into the wristband, as shown by
the arrow in the following picture and then place the Corebox
completely into the wristband.
Perform the steps in reverse order to remove the Corebox.

6
2
Pairing
The BoomBand is compatible with mobile devices supporting
Bluetooth 4.0 LE (Android 4.3 or higher versions).
Currently, the BoomBand supports the following models: ALCATEL
ONETOUCH Idol X+; ALCATEL ONETOUCH POP S3; ALCATEL
ONETOUCH POP S7; ALCATEL ONETOUCH POP S9; ALCATEL
ONETOUCH IDOL 2 Mini; ALCATEL ONETOUCH IDOL 2 Mini S;
ALCATEL ONETOUCH IDOL 2S;ALCATEL ONETOUCH IDOL 2.
2.1 First pairing
• Download BoomBand Life from http://www.alcatelonetouch.
com. (BoomBand Life is pre-installed in ALCATEL ONETOUCH
Idol X+.)
• After installation and launch, you are requested to set your
personal info as below:
• Once you choose to pair BoomBand, a message is displayed to
prompt you to turn on Bluetooth (if it is off) and then search for
BoomBand devices.

7
• BoomBand Life requests to pair with nearby BoomBand devices and
will remind you to knock the BoomBand twice for confirmation.
The 5 LED lights will then blink in sequence.
• When the BoomBand is successfully paired, it vibrates once and 5
lights come on together. “Connect successfully!” will be
displayed.
At least 4 LED lights are required for the first pairing. It is
recommended that the Corebox be charged during the
first pairing.
2.2 Changing paired phones
• On entering the main interface of BoomBand Life a message is
displayed to prompt you to turn on Bluetooth (if it is off) and then
search for BoomBand devices.
• If you change the paired phone, all original data recorded from the
BoomBand will be saved in the old phone and new data will be
generated in the newly paired phone.

8
2.3 Changing BoomBand devices
If you want to change your BoomBand, please unpair the old one
and then add the new device. This will ensure that BoomBand Life
continues to work normally.

9
3
Walk tracking
Your BoomBand is designed to track your sports data based on the
specific goal or value that you define.
When your BoomBand is on standby, you can manually change its
mode between Sleep and Sports by continuously knocking it 6 times.
When your BoomBand is set to Step Counting mode, it vibrates
once and the sports indicator blinks 3 times.
Your BoomBand can:
• Correctly recognize walking actions. Generally, the standby time in
this mode will be 3 to 5 days.
• Count the calories burned.
• Count the distance walked.

10
• When the BoomBand is on standby and you knock it twice, the
LED lights will show how close you are to achieving your goal. Each
fully lit indicator represents 20% of your total goal. The last light
blinks and will switch off after 5 seconds.
• When the goal is achieved, 5 LED lights will blink 3 times from the
outer side to the middle to congratulate you.
• View sports graphs for Today/ 7 days/ 31 days.
You are advised to rapidly tap the front centre of the
wristband with two fingers. Try more times if the first
tapping fails.