Alcatel onetouch SmartBand User manual

1
Quick Start Guide
English - CJB33N0ALAAA

2
Contents
1 Your Smartband ...........................................................................3
2 Pairing..............................................................................................6
3 Walk tracking................................................................................8
4 Sleep tracking................................................................................9
5 Call reminder ..............................................................................10
6 Alert while left............................................................................11
7 Silent alarm ..................................................................................12
Troubleshooting................................................................................13
Safety and use....................................................................................14
General information........................................................................15
Warranty.............................................................................................16

3
1
Your Smartband
1.1 What’s included
Your Smartband box includes:
• Corebox
• Wristband
• Charger
• Smartband Quick Start Guide

4
1.2 Charging your Smartband
Insert the corebox into the charger, as the arrow shows in the
following picture. Ensure that the icons on the corebox match those
on the charger.
• Pre-charging: If the Smartband has run out of battery, the LED lights
will indicate after several minutes' charging.
• Charging: The LED lights will progressively indicate on your
Smartband and blink every 5 seconds.
• Fully charged: Five lights are on and blink every 30 seconds.
Battery type Standby time Charging time
Lithium-polymer
battery
3-5 days About 1.5 hours

5
1.3 Installation
Insert one end of the corebox into the wristband, as the arrow
shows in the following picture and then place the corebox into the
wristband totally.
Perform the steps in the reverse order to remove the corebox.

6
2
Pairing
The Smartband is compatible with mobile devices supporting
Bluetooth 4.0 LE (Android 4.3 or higher versions).
Currently, the Smartband supports the following models: ALCATEL
ONETOUCH Idol X+; ALCATEL ONETOUCH POP S3; ALCATEL
ONETOUCH POP S7; ALCATEL ONETOUCH POP S9; ALCATEL
ONETOUCH IDOL 2 Mini; ALCATEL ONETOUCH IDOL 2 Mini S;
ALCATEL ONETOUCH IDOL 2S;ALCATEL ONETOUCH IDOL 2.
2.1 First pairing
• Download Smartband Life from http://www.alcatelonetouch.
com/global-en/support/faq/smartband.html. (Smartband Life is pre-
installed in ALCATEL ONETOUCH Idol X+.)
• After entering the main interface of Smartband Life, a message is
displayed to prompt you to turn on Bluetooth (if it is off) and then
search for the Smartband devices.
• Smartband Life requests to pair with the nearby Smartband
devices and will remind you to knock the Smartband twice for
confirmation.The 5 LED lights will blink in sequence.
• When the Smartband is successfully paired, it will vibrate once and
5 lights are on together.“Paired” will be displayed.
At least 4 LED lights are required for the first pairing. It is
recommended that the corebox be charged during the
first pairing.

7
2.2 Changing paired phones
• Enter the main interface of Smartband Life and a message is
displayed to prompt you to turn on Bluetooth (if it is off) and then
search for the Smartband devices.
• If you changed the paired phones, all original data recorded from
the Smartband will be saved in the old phone and new data will
generate in your new paired phone.
2.3 Changing Smartband devices
If you want to change the Smartband, please unbind the old one
and then add the new device. In this way, can Smartband life work
normally.

8
3
Walk tracking
Your Smartband is designed to track your sports data based on the
specific goal or value that you define.
When your Smartband is standby, you can manually change its mode
between Sleep and Sports by continuously knocking it for 6 times.
When your Smartband is set to Step Counting mode, it vibrates once
and the sports indicator blinks for 3 times.
Your Smartband can:
• Correctly recognize walking actions: Generally, the standby time
will be 3-5 days.
• Count the calories burned.
• Count the distance walked.
• When the Smartband is standby and you knock it twice, the LED
lights will show the goal conditions you’ve accomplished. Each LED
light represents 20% of the total goal.The last light blinks and will
be off after 5 seconds.
• When the goal is achieved, 5 LED lights will blink 3 times from the
outer side to the middle for congratulations.
• View sports graph of Today/ 7 days/ 31 days.
You are advised to rapidly knock the front centre of the
wristband with two fingers. Try more times if the first
knocking fails.

9
4
Sleep tracking
Your Smartband can track your sleep quality.
When your Smartband is standby, you can manually change its mode
between Sleep and Sports by continuously knocking it for 6 times.
When your Smartband is set to Sleep mode, it vibrates once and the
sleep indicator blinks for 3 times.
Your Smartband can:
• Measure your total sleeping time.
• Detect your sleeping status such as awake, turning over, and asleep.
• View sleep graph of Today/ 7 days/ 31 days.
When you are awake from sleep, please knock the Smartband to
change to Sports mode for data accuracy.
Sleep sync reminder
From My reminders, you can turn on this function and if your
Smartband has changed to Sleep mode, your mobile phone will be
in silent mode.

10
5
Call reminder
Your Smartband can remind you of missed calls if you set Call Reminder
to On in Smartband Life settings.The reminder is off by default.
• When there is an incoming call, your Smartband will vibrate and the
call indicator will blink 6 times quickly.
• Your Smartband can remind you of all missed calls or calls fromVIP
contacts.A maximum of 5 VIP contacts can be added.
• You can stop the alert by knocking the wristband twice.
• This feature is available only when the Smartband and mobile
phone is well connected.

11
6
Alert while left
When your Smartband is at a distance from your mobile phone, it will
• Turn on Alert while left in Smartband Life settings. This feature is
off by default.
• When the distance between the Smartband and your mobile phone
exceeds the safety distance, the Smartband will double-vibrate for
3 times and 5 lights blink in sequence.
• You can stop the alert by knocking the wristband twice.

12
7
Silent alarm
Your Smartband can gently vibrate to wake or alert you after you set
My Alarm in Smartband Life settings.
• The Smartband double-vibrates for 6 times when it wakes you at
specified time.
• You can stop the alarm by knocking the wristband twice.

13
Troubleshooting
Please refer to the instructions below before contacting our after-
sales service:
1. Pairing Failures
Since signal interference may occur with Bluetooth connection,
length of pairing may differ case by case. If pairing attempts keep
failing, please try the following ways and re-connect.
A. Reboot Bluetooth;
B.Reboot your cellphone；
C. Check whether is charged；
D. Log out your Smartband or your account and log in again.
2. Battery not Charged
Please check whether the Corebox is well inserted into the charger
(refer to 1.2 picture).
After the battery is totally consumed, it will enter pre-charging
period. After 3 to 5 minutes' charging, it will enter normal charging
period (the charging light will indicate normally.)
3. Vibration and Led indicator lights not working
Charge and confirm the battery works, then start pairing. If the
pairing fails, refer to “Pairing Failures”. If the pairing succeeds, check
the indicator lights and the vibrator by knocking.
4. Unexpected vibration or blink: it may be caused by misoperation.
5. Factory reset
If the instructions above are not working for your trouble, try
resetting your Corebox as a last resort. Fit the Corebox into the
charger, then insert into the Reset hole with a paper clip or other
alternatives. Push slightly until a click is heard, then all 5 LED indicator
lights will blink together, followed by the 1st light blinking.

14
Safety and use
It is recommended to read all the safety content before using
Smartband. Boomer Band manufacturer is not subject to results
inflicted by improper usage or failure to follow this manual.
• Please read through the following instructions.
• And follow the instructions.
• Pay attention to any warning.
• Don’t attempt to open the Corebox. Under inappropriate
operation, the product and the battery can be hazardous to human
body and the environment.
• Don't disturb the normal working of Smartband.
• Don’t clean Smartband with corrosive cleaning products.
• Don’t place Smartband in dishwashers, washing machines or dryers.
• Don’t expose Smartband to extreme temperatures.
• Don’t keep exposing Smartband to direct sunlight.
• Don’t place Smartband close to fire.
• Don’t throw Smartband into fire. This may cause the battery to
explode.
• Don’t attempt to disassemble Smartband.The components cannot
be repaired.
• Don’t allow children to play with Smartband. Smaller components
may present a choking hazard to children.

15
General information
• Internet address: http://www.alcatelonetouch.com/global-en/
support/faq/smartband.html
• LICENCES
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by TCT
Mobile Limited and its affiliates is under license. Other
trademarks and trade names are those of their respect-
ive owners.

16
Warranty
We aim at “creating value for consumers”. In order to better protect
consumers’ rights, please read through the following points in case
of controversy:
Smartband is warranted against any defect or malfunctioning which
may occur in conditions of normal use during the warranty period
of twelve (12) months from the date of purchase as shown on your
original invoice. (The warranty period may vary depending on your
country.)
Within the warranty span, damages and defects deemed by
authorized technical personnel as incurred from normal uses, are
subject to free repair service provided by the company and the
company is allowed to charge or refuse to repair under the following.
A. Damage caused by accident or abuse.
B. Conducting or allowing unauthorized personnel to conduct tests,
repair, or disassembly to the product.
C. Damages caused by usage of or connection to non-official
accessories.
ALCATEL is a trademark of ALCATEL-Lucent
and is used under license by
TCT Mobile Limited.
© Copyright 2014 TCT Mobile Limited
All rights reserved
TCT Mobile Limited reserves
the right to alter material
or technical specification
without prior notice.