ALDI AMBIANO User manual

ID: #05007
m
y
h
a
n
s
e
c
o
n
t
r
o
l
.
c
o
m
M
A
N
U
A
L
D
E
V
E
L
O
P
E
D
I
N
G
E
R
M
A
N
Y
User-friendly
Manual
User Manual
Manual
del usuario
MINI FOOD CHOPPER WITH
GLASS BOWL
MINIPICADORA CON
RECIPIENTE DE VIDRIO
English... Page 06
Español...Página 21

QR codes take you where you want to go
quickly and easily
Whether you require product information, spare parts or accessories, de-
tails on warranties or aftersales services, or if you want to watch a product
demonstration video, our QR codes will take you there in no time at all.
What is a QR code?
A QR code (QR = Quick Response) is a type of matrix that can be read with a
smartphone camera and that contains a link to a website or contact details,
for example.
Advantage:You do not need to manually enter a website address or contact
details.
How it works
To scan the QR code, all you need is a smartphone with QR code reader soft-
ware and an internet connection.* This type of software can be downloaded
for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and find out
more about the Aldi product you have purchased.*
Your Aldi Service Portal
All details mentioned above can also be found in the
Aldi Service Portal at www.aldi.us.
* Depending on your tariff plan you may be charged for the connection.

Contents
Overview .............................................................................4
Use........................................................................................5
Product contents/device parts...........................................6
General information............................................................7
Reading and storing the user manual ..................................7
Explanation of symbols ...........................................................7
Safety...................................................................................8
Proper use................................................................................. 8
Safety notes.............................................................................. 8
First use...............................................................................12
Checking the mini food chopper and product contents.. 12
Basic cleaning.......................................................................... 12
Assembling the mini food chopper ..................................... 12
Operation........................................................................... 14
Using the mini food chopper with the blade insert..........14
Using the mini food chopper with the frothing insert .....14
Cleaning............................................................................. 15
Cleaning the motor block......................................................16
Cleaning the blade insert, frothing insert, lid and bowl..16
Storage .............................................................................. 16
Troubleshooting.................................................................17
Technical data ................................................................... 18
Disposal.............................................................................. 18
Disposing of the packaging ..................................................18
Disposing of the mini food chopper ....................................18
Warranty card.................................................................... 19
Warranty conditions..........................................................20

4
USA
A
1
2
3
4
5
6
7
8
9
10
11

5
USA
B
C
12
13

6
USA
Product contents⁄device parts
1Pulse button
2Motor block
3Handle (lid), 2×
4Lid
5Frothing insert
6Handle (bowl), 2×
7Bowl
8Base
9Bolt
10 Blade insert
11 Pin, 2×
12 Hole, 2×
13 Gear shaft

AFTER SALES SUPPORT
USA
General information
7
USA
1-800-886-8506 [e-mail]
General information
Reading and storing the user manual
This user manual accompanies this mini food chopper with glass
bowl. It contains important information on start-up and handling.
For improved readability, the „mini food chopper with glass bowl“
will be referred to only as the “mini food chopper” below.
Before using the mini food chopper, read the user manual carefully. This partic-
ularly applies for the safety notes. Failure to comply with this user manual may
result in severe injury or damage to the mini food chopper.
Store the user manual for future use. If you pass the mini food chopper on to
third parties, please be absolutely sure to include this user manual.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
mini food chopper or on the packaging.
WARNING! This signal symbol/word designates a hazard
with moderate risk, which may result in death
or severe injury if not avoided.
NOTICE! This signal word warns against potential dam-
ages to property.
This symbol provides you with useful supplementary
information on assembly or operation.
This mini food chopper has met the United States of America
electrical product safety requirements and has earned the ETL
Listed Mark.

Safety
USA
AFTER SALES SUPPORT
8
USA
1-800-886-8506
[e-mail]
Safety
Proper use
The mini food chopper is only for chopping fruits, vegetables, herbs or similar,
for preparing dressings or stirring and whipping liquid foods such as eggs or
cream. It is only intended for private use and is not suitable for commercial use.
The mini food chopper is not intended for use
• in employee kitchens,
• in stores, offices and other commercial areas,
• in agricultural operations,
• in commercial areas and
• not for use by customers in hotels, motels, other residential facilities or bed
and breakfasts.
Only use the mini food chopper with the original accessories and only as
described in this user manual. Using it in any other way is deemed improper
and may result in damage to property or even personal injury. The mini food
chopper is not a children’s toy.
The manufacturer or vendor cannot be held liable for damages incurred
through improper or incorrect use.
Safety notes
WARNING!
Risk of electric shock!
Afaultyelectricalinstallation,excessivelinevoltageorimproper
use may result in an electric shock.
− Only connect the mini food chopper if the line voltage of
the socket corresponds to the data on the nameplate.
− Only connect the mini food chopper to an easily accessible
socket so that you can quickly disconnect it from the grid
in the event of a fault.
− Do not connect the mini food chopper along with other
devices to a power strip or multiple socket strip at the
same time.

AFTER SALES SUPPORT
USA
Safety
9
USA
1-800-886-8506 [e-mail]
− Do not operate the mini food chopper if it exhibits visible
damages or if the power cord or power plug is defective.
− If the power cord of the mini food chopper is damaged,
it must be replaced by the manufacturer, its customer
service department or a person with similar qualifications
in order to rule out any risks.
− Do not open the housing and do not in any case attempt
to use metallic objects to access the inside of the mini food
chopper. Have qualified professionals perform repairs.
For this, contact an authorized qualified workshop.
Liability and warranty claims are waived in the event of
repairs performed by the user, improper connection or
incorrect operation.
− Only parts that comply with the original device data may
be used for repairs. This mini food chopper contains
electrical and mechanical parts, which are essential for
providing protection against sources of danger.
− The mini food chopper must not be operated with an
external timer or separate telecontrol system.
− Do not immerse the mini food chopper or the power cable
or power plug in water or other liquids.
− Do not use the mini food chopper if you are standing on a
damp floor or if your hands or the mini food chopper are
wet.
− Only use the mini food chopper in dry indoor areas.
− Do not pull the power plug out of the socket by the power
cable; instead, always pull it out by the plug.
− Never use the power cable as a carrying strap.
− Keep the mini food chopper, power plug and power cable
away from open flames and hot surfaces. Never place the
mini food chopper near heat sources.
− Lay the power cable so that it does not pose a tripping
hazard and does not come into contact with sharp objects.
− Do not kink the power cable, do not lay it over sharp edges
and do not wind it around the mini food chopper as the
cable could break as a result.

Safety
USA
AFTER SALES SUPPORT
10
USA
1-800-886-8506
[e-mail]
− Never attempt to catch the mini food chopper if it has fallen
in water. In such a case, immediately disconnect the power
plug. Afterwards, do not operate the mini food chopper,
but first have it checked by an authorized service point.
− Pull the power plug out of the socket
• when you are not using the mini food chopper,
• before you clean the mini food chopper,
• if a fault occurs,
• in the event of a storm.
WARNING!
Danger for children and persons with impaired physical,
sensory or mental capacities (e.g. partially disabled persons,
older persons with reduced physical and mental capacities)
or lack of experience and knowledge (e.g. older children).
− The mini food chopper must not be used by children. Keep
the mini food chopper and its connector cable out of the
reach of children.
− Children must not play with the mini food chopper.
− Cleaning and user maintenance must not be performed
by unsupervised children.
− Make sure that children do not play with the packaging
wrapper. They may get caught in it when playing and
suffocate.
− Keep the mini food chopper out of the reach of children.
− The mini food chopper may be used by persons with impaired
physical, sensory or mental capacities or those lacking expe-
rience and/or knowledge if they are supervised or have been
instructed in how to safely use the device and have under-
stood the risks associated with operating it.

AFTER SALES SUPPORT
USA
Safety
11
USA
1-800-886-8506 [e-mail]
WARNING!
Risk of injury!
Theminifoodchopperisequippedwithsharpblades.Improper
handling of the mini food chopper or individual parts of the
device may inflict serious cuts.
− Do not touch rotating parts of the device and never
attempt to stop moving device parts with your hand or
with other objects.
− Do not touch the blades with bare hands.
− Do not use the mini food chopper if the blades are damaged.
− Only use the enclosed original accessories.
− Clearly advise other users of the risks.
− Do not chop any hard ingredients or seeds and
if necessary, remove any stalks or stems before you chop
the ingredients. Before you chop meat, remove any bones
and sinews if present.
− Absolutely do not operate the mini food chopper without
ingredients as the motor could overheat.
− Operate the mini food chopper with the blade insert
for no more than 15 seconds and with the frothing insert
for no more than 2minutes at a time. Then let the mini
food chopper cool down to room temperature.
NOTICE!
Risk of damage!
Improper handling of the mini food chopper may damage the
mini food chopper.
− Stop using the mini food chopper if parts of the mini food
chopper exhibit cracks or breaks or are deformed. Only
replace damaged parts with corresponding original spare
parts.

First use
USA
AFTER SALES SUPPORT
12
USA
1-800-886-8506
[e-mail]
First use
Checking the mini food chopper and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy objects, you could damage the mini
food chopper.
− Therefore, be careful when opening it.
1. Take the mini food chopper out of the packaging.
2. Check to make sure that the delivery is complete (see fig. A).
3. Check whether the mini food chopper or the individual parts exhibit damage.
If this is the case, do not use the mini food chopper. Contact the manufacturer
at the service address specified on the warranty card.
Basic cleaning
− Remove the packaging material and all protective foils.
− Before first use, clean all parts of the mini food chopper as described in the
chapter “Cleaning”.
Assembling the mini food chopper
WARNING!
Risk of injury!
Handlingtheminifoodchopperorindividualpartsofthedevice
improperly may result in severe injury.
− Always switch the mini food chopper off and pull the power
plug out of the socket when assembling or disassembling
the mini food chopper.
− Do not touch the blades with bare hands as the blades are
very sharp.
− Only take the lid off once the blades have come to a complete
stop.

AFTER SALES SUPPORT
USA
First use
13
USA
1-800-886-8506 [e-mail]
− Do not transport the mini food chopper while it is operating.
− Make sure that your hands, hair, clothing, jewelry or other
objects do not end up in the mini food chopper or the bowl
while chopping.
NOTICE!
Risk of damage!
Improper set up of the mini food chopper could cause damage.
− Place the mini food chopper on a level, dry and non-slip
work area.
− Do not place the mini food chopper on the edge of the
work surface.
− Never place the mini food chopper on or near hot surfaces
(e.g. hotplates, heating pipes etc.).
The mini food chopper has a safety device.
It only works if the motor block is properly seated on the lid of
the bowl.
Follow the steps below to assemble the mini food chopper:
1. Place the base 8on a level, dry and non-slip work surface (see fig.A, C).
2. Place the bowl 7on the base.
3. Fit the blade insert 10 or the frothing insert 5on the bolt 9in the bowl.
4. Place the lid 4on the bowl.
At the same time, the blade insert or the frothing insert must be run through the
middle of the opening in the lid.
When putting the lid on, make sure that the handles 3of the lid and the
handles 6of the bowl are lined up above one another and the “catches” of the
bowl are inserted in the recesses in the lid. The lid is now securely fitted on the
bowl and cannot be turned.
5. Place the motor block 2on the lid.
Make sure that the gear shaft 13 of the motor block is placed on the opening of
the blade insert or the frothing insert (see fig. A,B,C).
6. When fitting the motor block, run the pins 11 of the lid into the holes 12 on the
bottom of the motor block. For this, gently turn the motor block back and forth.
The motor block will audibly lock into place. Check whether the motor block is
securely seated.
The mini food chopper only works if all parts have been properly assembled.

Operation
USA
AFTER SALES SUPPORT
14
USA
1-800-886-8506
[e-mail]
Operation
Using the mini food chopper with the blade insert
You can chop and/or mince your ingredients with the blade
insert. Always cut the ingredients into small pieces before you
put them in the bowl. Do not use any hard ingredients as they
could damage the blade insert.
1. Place the base 8on a level, dry and non-slip work surface (see fig.A, C).
2. Place the bowl 7on the base.
3. Fit the blade insert 10 on the bolt 9in the bowl.
4. Put the prepared ingredients into the bowl.
Do not fill the bowl with ingredients past the MAX mark.
5. Put the lid 4and the motor block 2on the bowl
(see chapter “Assembling the mini food chopper”, steps 4 – 6, see fig.A, B, C).
6. Connect the mini food chopper to the power supply.
7. Push the pulse button 1down for no more than 15 seconds to chop the
ingredients and then let the motor block cool off.
Repeat the process if the ingredients have still not been adequately chopped up.
8. Disconnect the mini food chopper from the power supply.
9. Carefully take the motor block, the lid and the blade insert off. To do so,
reverse the steps described in the chapter “Assembling the mini food
chopper”.
10. Take the chopped ingredients out of the bowl.
Using the mini food chopper with the frothing insert
You can stir and beat liquid foods such as eggs and cream with
the frothing insert.
If you use the frothing insert, make sure that you do not add
an excessive quantity to the mini food chopper as the volume
of the ingredients used will increase. As a reference value, we
recommend not using more than 200 millimeters.

AFTER SALES SUPPORT
USA
Cleaning
15
USA
1-800-886-8506 [e-mail]
1. Place the base 8on a level, dry and non-slip work surface (see fig.A, C).
2. Place the bowl 7on the base.
3. Fit the frothing insert 5on the bolt 9in the bowl.
4. Put the prepared ingredients into the bowl. Make sure that you use an ap-
propriate amount.
The ingredients must not pass the MAX mark once frothed.
5. Put the lid and the motor block 2on the bowl
(see chapter “Assembling the mini food chopper”, steps 4 – 6, see fig.A, B, C).
6. Connect the mini food chopper to the power supply.
7. Push the pulse button 1to froth the ingredients. Hold the pulse button
down for no more than 2 minutes until the ingredients have been frothed
(most ingredients require much less time to be processed).
Then let the motor block cool off.
Repeat the process if the ingredients have still not been adequately frothed.
8. Disconnect the mini food chopper from the power supply.
9. Carefully take the motor block, the lid and the frothing insert off. To do so, reverse
the steps described in the chapter “Assembling the mini food chopper”.
10. Take the frothed ingredients out of the bowl.
Cleaning
WARNING!
Risk of electric shock!
Handling the mini food chopper improperly may result in an
electric shock. Water that has penetrated the housing may
cause a short circuit.
− Always switch the mini food chopper off and pull the power
plug out of the socket before you clean the mini food chopper.
− Never immerse the mini food chopper or the motor block
in water.
− Make sure that no water penetrates the housing.
− Do not use a steam cleaner for cleaning.

USA
AFTER SALES SUPPORT
16
USA
1-800-886-8506
[e-mail]
Cleaning
NOTICE!
Risk of damage!
Improperly cleaning the mini food chopper can cause damage.
− Do not use any aggressive cleaners, brushes with metal or ny-
lon bristles, sharp or metallic cleaning utensils such as knives,
hard scrapers and the like. They could damage the surfaces.
− Do not in any case place the motor block of the mini food
chopper in the dishwasher. It would be destroyed as a result.
Cleaning the motor block
1. Disconnect the power plug before cleaning.
2. Let the mini food chopper cool off completely.
3. Clean the motor block 2of the mini food chopper with a dry to damp cloth.
4. Then let the motor block dry completely.
Cleaning the blade insert, frothing insert, lid and bowl
WARNING!
Risk of injury
The blade insert of the mini food chopper is equipped with
sharp blades. You could injure yourself if you do not clean the
blade insert properly.
− Do not touch the blades with bare hands.
− Be very careful when cleaning the blade insert.
1. Disconnect the power plug before cleaning.
2. Let the mini food chopper cool off completely.
3. Clean the blade insert 10 , frothing insert 5, lid 4and bowl 7in warm
water containing detergent and with a damp cloth containing detergent.
4. Rinse the blade insert, the frothing insert, lid and bowl with clean water.
5. Dry the individual parts thoroughly with a towel or let the parts completely dry.

AFTER SALES SUPPORT
USA
Storage
17
USA
1-800-886-8506 [e-mail]
Storage
NOTICE!
Risk of damage
Improper storage of the mini food chopper can cause damage.
− Let the mini food chopper cool off before you store it.
− Store the mini food chopper in a clean, dry and frost-free
location.
− Never store the mini food chopper so that there is a risk of
it falling in a sink.
− Clean the mini food chopper as described in the chapter “Cleaning”.
− Keep the mini food chopper out of the reach of children.
− If possible, store the mini food chopper in the original packaging to protect
it against dust and splash water.
Troubleshooting
Fault Possible cause Measure
The mini food
chopper is not
working.
The power plug has not
been properly connected
to a socket.
Insert the power plug
in a socket.
The drive unit has not been
correctly fitted on the cover of
the bowl.
Always start by putting
the lid on the bowl and
then the drive unit. The
mini food chopper only
works once the lid has
been fitted.
The cutter does not
rotate.
The food in the bowl is not
suitable.
Switch the mini food
chopper off and discon-
nect it from the power
supply. Empty the bowl.
If the mini food chopper experiences any problems not listed in this table, con-
tact customer service at the service address specified on the warranty card.
You can also request this user manual from the customer service as a PDF.

Technical data
USA
AFTER SALES SUPPORT
18
USA
1-800-886-8506
[e-mail]
Technical data
Model: MX 2016
Nominal voltage: 120 V~
Nominal frequency: 60 Hz
Nominal output: 350 W
Article number: 93093
Disposal
Disposing of the packaging
− Sort the packaging before you dispose of it. Dispose of paperboard and
cardboard with the recycled paper service and wrappers with appropriate
collection service.
Disposing of the mini food chopper
− Should the mini food chopper no longer be capable of being used at some
point in time, dispose of it in accordance with the regulations in force in your
state or country.
− Please ensure your recycling information does apply to the local regulations
and the EPA recommendations (www.epa.gov).

USA
WARRANTY CARD
Description of malfunction
Return your completed warranty
card together with the faulty
product to:
Fusion Fulfillment, LLC
1121-A Industrial Parkway
Brick, NJ 08724
Phone: [phone]
E-Mail: [e-mail]
Your details:
Name
Address
Email
Date of purchase*
* We recommend you keep the receipt with this warranty card.
Location of purchase
MINI FOOD CHOPPER WITH
GLASS BOWL
2
YEARS WARRANTY
AFTER SALES SUPPORT
MODEL: MX 2016 PRODUCT CODE: 93093 02/2016
USA 1-800-886-8506 hup-se[email protected]om
Toll-free hotline

USA
Warranty conditions
Dear Customer,
The ALDI warranty offers you extensive benefits compared to the statutory
obligation arising from a warranty:
Warranty period: 2 years from date of purchase.
6 months for wear parts and consumables under nor-
mal and proper conditions of use (e.g. rechargeable
batteries).
Costs: Free repair/exchange or refund.
No transport costs.
ADVICE: Please contact our service hotline by phone, e-mail or
fax before sending in the device. This allows us to pro-
vide support in the event of possible operator errors.
In order to make a claim under the warranty, please send us:
• together with the faulty item, the original receipt and the warranty
card properly completed.
• the faulty product with all components included in the packaging.
The warranty does not cover damage caused by:
• Accident or unanticipated events (e.g. lightning, water, fire).
• Improper use or transport.
• Disregard of the safety and maintenance instructions.
• Other improper treatment or modification.
After the expiry of the warranty period, you still have the possibility to have
your product repaired at your own expense. If the repair or the estimate of
costs is not free of charge you will be informed accordingly in advance.
This warranty does not limit the statutory obligation of the seller arising from
a warranty. The period of warranty can only be extended in accordance with
a legal standard. In countries where a (compulsory) warranty and/or spare
part storage and/or a system for compensation are/is required by law, the
statutory minimum conditions apply. In the event that a product is received
for repair, neither the service company nor the seller will assume any liability
for data or settings possibly stored on the product by the customer.