ALDI N1F-GT-250/18-D User manual

User Manual
CORDLESS TRIMMER
18V LITHIUM-ION BATTERY
Manual
del usuario
DESBROZADORA
INALÁMBRICA
CON BATERÍA DE IONES
DE LITIO DE 18V
English.....Page 1
Español....Página 17
TM

Contents · Contenido
GettingStarted.......................................................................
Parts List...............................................................................
Schematic Drawing...............................................................
Safety Symbols.....................................................................
Safety Instructions...............................................................
Application............................................................................
Technical Data......................................................................
Assembly...............................................................................
Operation..............................................................................
Maintenance..........................................................................
Para comenzar............................................................................
Lista de pieza..............................................................................
Dibujo esquemático......................................................................
Símbolos de seguridad..................................................................
Instrucciones de seguridad..........................................................
Usos...........................................................................................
Datos técnicos.............................................................................
Ensamblaje.................................................................................
Funcionamiento............................................................................
Mantenimiento.............................................................................
01
02
03
04
05
08
09
10
13
16
17
18
19
20
21
24
25
26
29
32

Cordless Trimmer · 18V Lithium-ion Battery Getting Started
Getting Started
Idenfy all the parts packaged in the carton against the parts list. Remove all protecve
materials and place parts on a non-abrasive surface to avoid scratching. Please contact our
customer service center (Monday-Friday 8:00AM-5:00PM ET) at 1855 965 5310.
Cauon
Read all the instrucons before assembly. Failure to do so may result in faulty assembly and
potenal injury! Assemble product on a so, non-abrasive surface such as carpet or cardboard to
avoid damaging the item. Seek assistance to assemble bulky or heavy items. Aer nal
alignments, make sure all bolts and nuts are securely ghtened with screw covers pressed in
place.
Warning
1. Keep children and bystanders away while operang a power tool. Distracons cause a lose
control.
2. The charger’s plug must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with grounded power tools. Unmodied plugs and matching outlets will reduce risk
of electric shock.
3. Use personal protecve equipment. Always wear eye protecon. Protecve equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protecon used for appropriate condions
will reduce personal injuries.
4. Before using the machine and aer any impact, check for signs of wear or damage, and repair
as necessary.
5. Remove or disconnect the baery before servicing, cleaning or removing material from the
machine.
AFTER SALE SUPPORT
[email protected]
1
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015

Cordless Trimmer · 18V Lithium-ion Battery Parts List
Parts List
No. Descripon
1 le handle
2 right handle
3 handle cover
4 switch
5 lock-o buon
6 spring-1
7 spring-2
8 switch buon
9 insulaon cap
10 at washer
11 spring-3
12 acve handle cap
13 acve handle knob
14 tube assembly
15 internal cable
16 self-tapping screw ST2.9x9.5
17 self-tapping screw ST4.2x13
18 self-tapping screwST4.2x13
19 right spindle
20 right housing
21 motor
22 front cover
23 screw M4x8
24 fan
25 rivet
26 balance part
27 spring-4
28 le housing
No. Descripon
29 le spindle
30 acve gear
31 torsion spring
32 self-tapping screw ST4.2x13
33 pedal
34 self- tapping screw ST4.2x13
35 front handle cover
36 nut M6
37 knob
38 front handle
39 bolt M6x90
40 spool
41 spool cover
42 safety guard
43 blade
44 self-tapping screw ST4.2x9.5
45 self-tapping screw ST4.2x13
46 le buon
47 right buon
48 edge guard
49 baery pack
50 baery pack adapter
51 Terminal
52 Terminal xing plate
53 Self- tapping screw ST4.2x9.5
54 adapter
55 charger
Please refer to the Schemac Drawing, on the next page.
AFTER SALE SUPPORT
[email protected]
2
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015

Schematic Drawing
Schematic Drawing
AFTER SALE SUPPORT
[email protected]
3
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
54
55
Cordless Trimmer · 18V Lithium-ion Battery

Safety Symbols
Safety Symbols
WARNING: Please read all of the safety and operang instrucons carefully before using this
tool. Please pay parcular aenon to all secons of this User Guide that carry warning sym-
bols and noces.
1. Observe cauon and safety notes
2. To reduce the risk of injury, user must read and understand operator’s manual be-
fore using this product
3. Do not expose to rain or use in damp locaons
4. Always wear safety goggles or safety glasses with side shields and a full face shield
when operang this product
5. Always wear nonslip, heavy-duty protecve gloves when operang this product
6. Always wear nonslip safety footwear when operang this product
7. Always keep bystanders at least 50. (15m) away
AFTER SALE SUPPORT
[email protected]
4
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Safety Instructions
Safety Instructions
WARNING: Please read all of the safety and operang instrucons carefully before using this
tool. Please pay parcular aenon to all secons of this User Guide that carry warning sym-
bols and noces.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operang a power tool. Distracons cause a
lose control.
2. ELECTRICAL SAFETY
a) The charger’s plug must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with grounded power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
b) Use this baery-operated tool only with its specically designated baery pack. The
use of any other baeries may create a risk of re.
c) Do not expose power tools to rain or wet condions. Water entering a power tool will
increase the risk of electric shock.
d) A baery-operated tool with integrated baery or a separate baery pack must be
recharged only with the manufacturer specied charger for the baery. A charger that
may be suitable for one type of baery may create a risk of re when used with another
baery.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operang a power
tool. Do not use a power tool while red or under the inuence of drugs, alcohol or
medicaon. A moment of inaenon while operang power tools may result in serious
personal injury.
b) Use personal protecve equipment. Always wear eye protecon. Protecve equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protecon used for
appropriate condions will reduce personal injuries.
c) Prevent unintenonal starng. Ensure the switch is in the o-posion before
connecng to power source, picking up or carrying the tool. Carrying power tools with
your nger on the switch or plugging in power tools that have the switch on invites
accidents.
AFTER SALE SUPPORT
[email protected]
5
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Safety Instructions
d) Remove any adjusng key or wrench before turning the power tool on. A wrench or a key le
aached to a rotang part of the power tool may result in personal injury.
e) Do not overreach. Keep proper foong and balance at all mes. This enables beer control of
the power tool in unexpected situaons.
f) Dress properly. Do not wear loose clothing, neckes, or jewelry that can get caught and draw
you into moving parts. Work gloves and nonskid footwear are recommended when working
outdoors. Also wear protecve hair covering to contain long hair.
g) Protect your hearing. Wear hearing protecon during extended periods of operaon.
h)Keep hands and feet away from the cung area.
4. OPERATOR SAFETY
a) Wear protecve glasses or goggles.
b) Never allow children or people unfamiliar with the instrucons to use the machine.
c) Stop using the machine while people, especially children, or pets are nearby.
d) Only use the machine in daylight or good arcial light.
e) Before using the machine and aer any impact, check for signs of wear or damage, and repair
as necessary.
f) Never operate the machine with damaged guards or without the guards in place.
g) Keep hands and feet away from the cung head at all mes.
h) Take care against injury from any device ed for trimming the lament line length. Aer
extending new cuer line always return the machine to its normal operang posion before
switching on.
i) Never modify machine for use with metal cung elements.
j) Never use replacement parts or accessories not provided or recommended by the manufac-
turer.
k) Always ensure that machine’s venlaon openings are kept clear of debris.
5. BATTERY SAFETY RULES
a) Do not charge baery in rain or wet locaons.
b) Do not use baery-powered appliance in the rain.
c) Remove or disconnect the baery before servicing, cleaning or removing material from the
gardening appliance.
d) Do not dispose of the baery in a re, the cell may explode. Check with local codes for pos-
sible special disposal instrucons.
e) Do not open or mulate the baery. Released electrolyte is corrosive and may cause damage
to the eyes or skin. It may be toxic if swallowed.
f) Exercise care in handling baeries. Be careful not to short the baery with conducng materi-
als such as rings, bracelets and keys. The baery or conductor may overheat and cause burns.
AFTER SALE SUPPORT
[email protected]
6
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Safety Instructions
g) Be aware of your work environment. Baeries can explode in the presence of a source of igni-
on, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless
product in the presence of open ame. An exploded baery can propel debris and chemicals. If
exposed, ush with water immediately.
h) Do not crush, drop or damage baery pack. Do not use a baery pack or charger that has
been dropped or received a sharp blow. A damaged baery is subject to explosion. Properly
dispose of a dropped or damaged baery immediately.
i) Proper charging temperature. For best results, baery pack should be charged in a locaon
where the temperature is between 41°F and 104°F (5°C to 40°C). Charging me will increase if
the baery is charged in lower or higher temperature than specied.
j) Pay aenon to baery leakage. Under extreme usage or temperature condions, baery
leakage may occur. If baery liquid comes in contact with your skin, wash immediately with soap
and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, ush them
with clean water for at least 10 minutes and, seek immediate medical aenon. Following this
rule will reduce the risk of serious personal injury.
6. CHARGER SAFETY RULES
a) Do not place any object on top of charger or place the charger on a so surface that might
block the venlaon slots and result in excessive internal heat. Place the charger in a posion
away from any heat source. The charger is venlated through slots in the top and the boom of
the housing.
b) Do not mount charger on wall or permanently ax charger to any surface. The charger is
intended to be used on a at, stable surface (i.e., table top, bench top).
c) Do not operate charger with damaged cord or plug have those replaced immediately.
d) Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged
in any way. Take it to an authorized service center.
e) Do not disassemble charger. Take it to an authorized service center when service or repair is
required. Incorrect reassembly may result in a risk of electric shock, electrocuon or re.
f) Disconnect the charger from the outlet before aempng any cleaning. This will reduce the
risk of electric shock. Removing the baery pack will not reduce this risk.
g) NEVER aempt to connect two or more chargers together.
h) The charger is designed to operate on standard house hold electrical power (120 Volts). Do
not aempt to use it on any other voltage.
AFTER SALE SUPPORT
[email protected]
7
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Application
Application
Intended use
The cordless grass trimmer is intended for cung weeds and long grass along edges of lawn.
Check the box contents
Carefully remove the machine from its packaging and check the following parts are present:
-- 18V grass trimmer
-- Lithium-Ion baery pack
-- Adapter
-- Charger
-- Safety guard
-- Auxiliary handle kit
If any parts are missing or damaged, please contact Customer Service at 1855 399 9415.
Parts list
The numbering of the product parts refers to the illustraon of the power tool on Fig 1.
1. Main handle
2. Switch trigger
3. Auxiliary handle knob
4. Auxiliary handle
5. Edger rotaon collar
6. Telescopic tube knob
7. Head rotaon pedal
8. Safety guard
9. Line cut-o blade
10. Edge guard
11. Lock-o buon
12. Baery pack
13. Adapter
14. Charger
Fig.1
AFTER SALE SUPPORT
[email protected]
8
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Technical Data
Technical Data
Product code 45239
Capacity
12 in. (300mm)
Model number N1F-GT-250/18-D
Cung diameter
AutoFeeding
18V
Edger Yes
Voltage rang
1.5 Ah, Li-Ion
Spool 0.055 in. x 16.5 .(1.4mm x 5m)
AFTER SALE SUPPORT
[email protected]
9
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Assembly
Assembly
WARNING: To avoid injury and to reduce the risk of electrical shock or re:
Replace the baery pack or charger immediately if the baery case or charger cord is damaged.
Always make sure the string trimmer switch is OFF before inserng or removing the baery pack.
Always make sure the baery pack is removed and the switch is OFF, before assembling, inspect-
ing, adjusng, or maintaining any other part of the string trimmer.
Read, understand, and follow the Baery Charger instrucons.
1. Unpacking
Carefully remove the machine and accessories from the box. Make sure that all items listed on
previous page are included. Inspect the machine carefully to make sure no breakage or damage
occurred during shipping. Keep the packing material unl you have carefully inspected and sat-
isfactorily operated the machine.
2. Charge the baery (Fig2)
WARNING: Never aempt to open the baery pack for any reason. If baery pack case is cracked
or damaged, do not insert into charger. Do not crush, drop or damage baery pack.
Do not use a baery pack or charger that has received a sharp blow, been dropped, run over or
damaged in any way (i.e., pierced with a nail, hit with a hammer or stepped on). Damaged bat-
tery packs should be returned to service center for recycling.
WARNING: Fire hazard. Do not store or carry baery so that metal objects can contact exposed
baery terminals. For example, do not place baery in aprons, pockets, tool boxes, product kit
boxes, drawers, etc.; with loose nails, screws, keys, etc.
Use the charger in normal room temperature whenever possible. To prevent overheang, do not
cover the charger and do not charge baery pack in direct sunlight or near heat sources.
Always unplug the charger from the power supply when there is no baery pack inserted.
-Insert the cord plug into an appropriate AC power outlet. The green LED light comes on indicat-
ing the adapter is ready for use.
-Connect the plug wire to the charger.
-Insert the baery pack into the charger, the green LED light will change to red to indicate
charge. The baery pack will only t into the charger one way; do not force the baery pack. Be
sure that the baery pack is fully inserted into the charger.
-The baery pack will be fully charged aer about 3 hours, and the red LED light will change to
green. Remove the cord plug from the power outlet and remove the baery pack.
AFTER SALE SUPPORT
[email protected]
10
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Assembly
-The cord, charger and baery pack can be le connected with the green LED indenitely. The
charger will keep the baery pack fresh and fully charged.
-The best storage place is one that is cool and dry away from direct sunlight and excess heat or
cold.
Note: The baery pack needs to be charged before rst use and whenever it is unable to per-
form jobs with sucient power that were easily done previously. Recharge discharged baeries
as soon as possible aer use or baery life may be greatly diminished.
For best results, baery pack should be charged in a locaon where the temperature is between
41°F and 104°F (5°C to 40°C). Charging me will increase if the baery is charged in lower or
higher temperature than specied.
The adapter, charger and baery pack maybe become warm when charging which is a normal
condion.
3. Assemble the guard (Fig. 3 & 4)
WARNING: Remove the baery pack before aempng to aach the guard. Never operate the
tool without guard rmly in place. The guard must always be on the tool to protect the user
-Push the head rotaon pedal to rotate the cung head to vercal posion, rotate the edge
guard forward to working posion.
-Turn the trimmer upside down so that you are looking down at the spool cap.
-Turn the guard upside down and put it on the motor housing.
-Insert and ghten the screw provided to complete the guard assembly..
Fig.2
AFTER SALE SUPPORT
[email protected]
11
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
A
CB
Fig.3 Fig.4
Cordless Trimmer · 18V Lithium-ion Battery

Assembly
4. Assemble the auxiliary handle (Fig. 5)
-Loosen the auxiliary handle knob
-Rotate the auxiliary handle upside to comfortable posion.
-Tighten the auxiliary handle knob.
5. Extend the telescopic tube (Fig. 6)
-Loosen the telescopic knob.
-Extend the tube to comfortable posion.
-Tighten the telescopic knob.
6. Install and remove the baery (Fig.7 & 8)
WARNING! Make certain the lock-o buon is engaged to prevent switch actuaon before re-
moving or installing baery
-To install baery pack, push the baery pack into the slot of the machine, slide the baery pack
unl fully inserted with an audible click.
-To remove baery pack, depress the baery pack release buon, on the back of the baery
AFTER SALE SUPPORT
[email protected]
12
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Fig.5 Fig.6
Fig.7 Fig.8
Cordless Trimmer · 18V Lithium-ion Battery

Operation
Operation
WARNING: Always use the correct voltage: the voltage of the power source must match with the
values on the nameplate of the tool.
Switch ON and OFF (Fig 9 & 10)
WARNING: Always use proper eye protecon that conforms to ANSI Z87.1 (CAN/CSA Z94.3) stan-
dards while operang this machine.
Inspect area to be trimmed and remove any wire, cord, or string-like objects which could become
entangled in the rotang line or spool. Be parcularly careful to avoid any wire which might be
bent outwardly into the path of the tool, such as barbs at the base of a chain link fence.
-To switch the trimmer on, push the lock-o buon and squeeze the switch trigger.
-With the unit on, grasp both handles and angle, slowly swinging the trimmer side to
side.
-To switch the trimmer o, squeeze the switch trigger again.
-Restarng the machine aer complete stop will feed the spool line automacally. Do
not bump unit on ground to feed the line.
Note: Trimming ps
Keep the trimmer lted toward the area being cut, this is the most ecient cung area.
The string trimmer cuts when moving the unit from le to right. This will avoid throwing debris
at the operator.
Use the p of the string to do the cung, do not force string head into uncut grass.
Wire and picket fences cause extra string wear, even breakage. Stone and brick walls, curbs and
wood may wear string rapidly.
Avoid trees and shrubs. Tree bark, wood moldings, siding and fence posts can easily be damaged
by the strings.
AFTER SALE SUPPORT
[email protected]
13
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Fig.9 Fig.10
Cordless Trimmer · 18V Lithium-ion Battery

2. Convert to edging mode (Fig 11 & 12)
-Hold the main handle, push the collar downwards and rotate the lower housing 180°.
-Release the collar to x edger mode and posion the trimmer above the surface with
edge guard to operate as a maintenance edger.
-Restarng the machine aer complete stop will feed the spool line automacally.
-Return to the trimming posion by reverse rotaon aer pushing the collar downwards.
Note: Cung line will wear faster and require more feeding if the cung or edging is done along
sidewalks or other abrasive surfaces or heavier weeds are being cut.
Operation
3. Adjust the cung head (Fig 13 & 14)
-Push the head rotaon pedal to rotate the cung head to cut the grass under bush or tree.
-Push the head rotaon pedal to rotate cung head back to return trimming posion.
AFTER SALE SUPPORT
[email protected]
14
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Fig.11 Fig.12
Fig.13 Fig.14
Cordless Trimmer · 18V Lithium-ion Battery

Operation
WARNING! Remove the baery pack before aempng to replace string spool.
-This trimmer uses 0.055 in. (1.4mm) diameter round nylon line. During use, the ps of
the lines will become frayed and worn, restarng the machine willl feed and trim a
fresh length of line.
-When no line is fed, remove the baery pack and turn the machine upside-down so
that you are looking down at the spool cap.
-Depress the tabs and remove the spool cap from the spool housing in the trimmer
head.
-Grasp empty spool retainer with one hand and pull it out.
-Unfasten the line end of new string spool and guide the line into the eyelet, push the
spool onto the head and rotate the spool slightly unl it’s fully inserted.
-Align the tabs on the spool cap with the slots in the housing.
-Push the cap onto the housing unl it snaps securely into place.
WARNING! To avoid tool damage; if the cung line protrudes beyond the line cut-o blade, cut
it o so that it just reaches the blade.
4. Replace string spool (Fig 13 & 14)
AFTER SALE SUPPORT
[email protected]
15
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Fig.15 Fig.16
Cordless Trimmer · 18V Lithium-ion Battery

Maintenance
Maintenance
WARNING! Always ensure that the tool is switched o and the baer is removed from tool before
making any adjustments or performing maintenance procedures
WARNING! Use only original manufacturer’s replacement parts, accessories and
aachments. Failure to do so can cause possible injury and poor
performance.
Maintenance and Cleaning
1. Always remove the baery from the tool before doing any maintenance or cleaning work.
2. For safe and proper working, always keep the tool and venlaon slots clean.
3. Regularly check to see if any dust or foreign material has entered the slots near the motor
and around the on/o switch.
4. Use a so brush to remove any accumulated dust.
5. Wear safety glasses to protect your eyes while cleaning.
6. If the body of the tool needs cleaning, wipe it with a so damp cloth.
WARNING! Do not use cleaning agents to clean the plasc parts of the tool. A mild
detergent on a damp cloth is recommended. Water must never come into
contact with the tool.
7. Never use causc agents to clean plasc parts.
8. Lubricate all moving parts at regular intervals.
9. When not in use, the machine should be stored indoors in a dry, locked up place—out of the
reach of children and untrained users.
AFTER SALE SUPPORT
[email protected]
16
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery

Desbrozadora inalámbrica • Batería de iones de litio de 18V Para comenzar
Para comenzar
Comparar todas las piezas incluidas en la caja con la lista de piezas. Quitar todos los materiales
de protección y colocar las piezas sobre una supercie no abrasiva para evitar que se rayen. Por
favor, póngase en contacto con nuestro centro de Servicio al cliente (de lunes a viernes de 8:00
a.m. - 5:00 p.m. ET) en el 1855 965 5310.
Precauciones
Lea todas las instrucciones antes de realizar el ensamblaje. ¡No hacerlo puede resultar en un
ensamblaje defectuoso y la posibilidad de sufrir lesiones! Realizar el ensamblaje del producto
sobre una supercie suave, no abrasiva, tal como una alfombra o cartón para evitar que se dañe
el arculo. Solicite asistencia para ensamblar los objetos voluminosos o pesados. Después de
realizar las alineaciones nales, asegúrese de que todos los tornillos y tuercas estén apretados
rmemente y con las cubiertas de los tornillos presionadas en su lugar.
Advertencia
1. No permita que los niños ni otras personas se acerquen mientras uliza una herramienta eléc-
trica. Las distracciones provocan la pérdida de control.
2. El enchufe del cargador debe ser el adecuado para el tomacorriente que se vaya a ulizar. No
modique el enchufe de ninguna forma. No ulice enchufes adaptadores con herramientas con
conexión a erra. Ulizar enchufes y los tomacorrientes correspondientes sin modicar reduce el
riesgo de descarga eléctrica.
3. Ulice un equipo de protección personal. Siempre ulice protección ocular. Los arculos de
protección, tales como mascarillas para el polvo, zapatos de seguridad andeslizantes, cascos y
protección para los oídos usados debidamente reducen el riesgo de sufrir lesiones personales.
4. Antes de ulizar la máquina y después de cualquier golpe, inspecciónela para descartar indicios
de daños o de desgaste, y haga las reparaciones que sean necesarias.
5. Saque o desconecte la batería antes de reparar, limpiar o quitar restos de material de la máqui-
na.
SERVICIO POSVENTA
[email protected]
17
1855 399 9415
MODELO: N1F-GT-250/18-D CÓDIGO DE PRODUCTO: 45239 04/2015